Nemesis clone by HCigar HELP

[ginger]

hi looking at buying Nemesis clone by HCigar aer they any good as have mvp2 at the min
do you need to bey a kicker as well

many thanks
 

[clivealive1]

well i have an mvp2 and wanted another mod.
So I looked and looked and got a vamo v5 very nice, longer though especially with large battery.
i am very pleased with it but battery no match for the mvp2's so if u get one get 2 batteries at least.
so depends what u are expecting or want. If you dont mind a longer mod then its a good choice.
its produces all you would expect vape wise with a iclear30 or iclear30 s.
its nicely built and looks good too.
oh if you get one i suggest u get a air controller as this will control vape but mainly will protect the main connection as i was told they
can wear if you change clearomisers a lot.

Hope this helps

[spikus]

Ginger .. If you go for the nemesis clone you don't need a kick but to get the best out of the mod a kick really improves it ... I have a cheap FT kick in mine (£5.00) and it works great ... The nemesis will come with all the tube sections you need... Mine currently has an 18650 and a kick...
Hope this helps

[ginge7289]

Dec 17, 2013 11:38:49 GMT spikus said:

but to get the best out of the mod a kick really improves it ... I have a cheap FT kick in mine (£5.00) and it works great ...

I disagree with that, you can get the best out of your Mech's by knowing how to build a coil to suit the juice you are vaping. Sure Kick's have their place and I use one everyday but that is to make my coil last longer not because it vapes better.

As for the FT kick, it will do the job but it will do it badly not giving a consistent Wattage like the Kick 2 does.

This is just my opinion and you are free to do what you like with your own money though

[blakey]

Dec 17, 2013 18:09:42 GMT ginge7289 said:

Dec 17, 2013 11:38:49 GMT spikus said:

but to get the best out of the mod a kick really improves it ... I have a cheap FT kick in mine (£5.00) and it works great ...

I disagree with that, you can get the best out of your Mech's by knowing how to build a coil to suit the juice you are vaping. Sure Kick's have their place and I use one everyday but that is to make my coil last longer not because it vapes better.

As for the FT kick, it will do the job but it will do it badly not giving a consistent Wattage like the Kick 2 does.

This is just my opinion and you are free to do what you like with your own money though

That's bang on with the cheap kick, if you're going to use a cheap kick then you may as well just buy a vamo
Kick2 all the way

[Greg]

I've just bought 2 hcigar nemesis mods from Vapegeek, great quality and lovely to use. I had a bit of a faff setting it up with an evolv kick in 18500 mode but that was my unfamiliarity rather than an issue with the mod, some help from here and a bit of YouTube searching and now I know what can be adjusted its a doddle to set up. Although the comment regarding building your coil to suit your juice is correct, the kick gives you the flexibility to change coils to any value you want within reason without having to match its resistance to your juice. In addition without a kick your restricted to the max battery voltage from the battery, the kick can elevate the voltage.
Search for evolv kick (not kick2) on YouTube by p busardo, excellent video explains exactly how the kick works on a mod and comparing how the same mod performs without the kick. If you buy a kick go for the kick 2.

[Dan]

I use the kick v2 in my nemmy clone and it gives the best power delivery out of all my mods. I only have evics and an svd to compare to but I'm seriously considering getting a few more nemmys and just using the vw mods for ohms/coil checkers..

It can be a pain taking the mod apart to adjust the power output of the kick but once it's done, it's done. (Assuming you keep the same atty and flavour combination)

Yes, you can faff around with no kick and coiling a certain resistance to get the right wattage but i find the insurances given by the electronics worth paying for..

As said, go for the v2 if you're looking at the Evolv range..maxes out at 15w, and can output 6amps.

You can even go subohm with it should you desire if my memory serves me correct. .

I bought mine from vape escape, ordered at just gone 3pm and it was here the following day..

[geordie_vaper]

i have been looking at a nemesis clone too, sorry to jump in, could anyone give some advice as what you will need to get started, so the clone,a kick what kind of batterys will the imr ones i am using in a vamo be ok to use? and what atty ect ect thanks

[Balllsy]

Looks like you're trying to run before you can walk geordie, if you don't know what atomiser to use with a mod perhaps you should start with a more basic set up until you aquire more knowledge.

We can't tell you which to use, there are many to try but only you can decide which suits your needs.

[jcol]

Dec 17, 2013 23:15:14 GMT geordie_vaper said:

i have been looking at a nemesis clone too, sorry to jump in, could anyone give some advice as what you will need to get started, so the clone,a kick what kind of batterys will the imr ones i am using in a vamo be ok to use? and what atty ect ect thanks

Basically as Ballsy said.
I am using a Nemisis clone and a Kayfun lite with a 1.4oHm microcoil and cotton.
Its been perfect for me so far, so much so, i have cured my shinyitus as i need noting else now (well maybe another nemisis and kfl )

[fagin]

You don't NEED a kick in a mechanical mod. IMHO if you want VV/VW you might as well stick with an electronic mod.

I use IMR's but I am very careful where I buy them, and how I charge them.

I just change them as soon as I feel the power drop.

[fagin]

But there again, my main vapes are a couple of Touchwoods, and not easily kickable, so I'm probably not the best person to comment.

[geordie_vaper]

your right ballsy i always do that but for me its the best way to lear with the things infront of me instead of reading text upon text on stuff, but yeah its getting put on the back burner for a good wile

[Carpe Vapor]

If you want to try it out without spending a lot, dare I say it, but clones are probably the best and cheapest choice initially.

I too am looking to try mech mods etc.

Alreay have a KayFun Lite Plus which I am really pleased with, so it wass really the next step for me.

I have a couple of clones on order (a proldiac and a chi you) and also a cheap kick (all from FastTech).

When they get here and if I am suitably impressed I may buy the real thing (not clones) as I believe the origina designers/manufacturers deserve to be supported.