Ehpro Kayfun 3.1 clone UK?

[Roscopecotrain]

Hi all so have some money to spend and want a ehpro kayfun 3.1 clone from the UK. Have found 2 so far.

Kernow vapes www.kernowvapes.co.uk/ehpro_kayfun_31_clone/p2086842_11393324.aspx at £36.99 and vape tank www.thevapetank.co.uk/product/ehprokayfun31clone at £38.49

Anybody have any discount codes for either of these or know of a cheaper ehpro kayfun clone in the UK?

Sent from my Galaxy Note 2

[Super-Shiny]

I don't think neither of them have a discount code Roscopecotrain i looked sometime back and found nothing.

[Roscopecotrain]

Dec 26, 2013 18:09:09 GMT Super-Shiny said:

I don't think neither of them have a discount code Roscopecotrain i looked sometime back and found nothing.

Thanks Jason, will just have to go with it then. Woop woop.

[Super-Shiny]

Dec 26, 2013 18:36:59 GMT Roscopecotrain said:

Dec 26, 2013 18:09:09 GMT Super-Shiny said:

I don't think neither of them have a discount code Roscopecotrain i looked sometime back and found nothing.

Thanks Jason, will just have to go with it then. Woop woop.

Just go with who has the best postage costs

[gordy180]

I'm sitting here vaping on the fastech kayfun clone and it is an amazing vape. I had a few problems with it at first but now its working perfect. I was just wondering is the ephro one even better than this

[maccafan]

If I were to buy, I would prefer the Russian 91% or a clone thereof over all the others including clones, counterfeits and the original due to it's air flow control feature in a compact size.

Vapewise, I doubt there is any discernible difference between any of them.

[londongemini]

IMHO, i prefer the ehpro one (the one in the black flip case) over the fasttech clone and the vb clone in the cardboard box. I got mine from mods and atties and its the best built of the lot. It does have a couple of issues with drip tips not all fitting well (not a deal breaker) and that i had to sand down one of the screws used for holding the coil, but unlike the others, it doesnt whistle and feels the best made.

anyway thats my 2p's worth! i am sure they are all nice and will give you a good vape

[spikus]

I can only comment on the FT one ... Once it had its obligatory thoroughly good clean it's been bloody marvellous never gurgled or leaked .. Either in conventional or micro coil mode ... I am over the moon with it ...

[Deleted]

I got mine from Modsandatties Roscopecotrain but the postage was quite high (£7 for next day tracked was the only option available) so as Super-Shiny suggests just go with the cheapest price inc p&p. BTW the fill hole on the clone is not a valve, as on the genuine Kayfun 3.1, but a removable grub screw.

[Roscopecotrain]

Dec 29, 2013 9:37:44 GMT @freefromsmoking said:

I got mine from Modsandatties Roscopecotrain but the postage was quite high (£7 for next day tracked was the only option available) so as Super-Shiny suggests just go with the cheapest price inc p&p. BTW the fill hole on the clone is not a valve, as on the genuine Kayfun 3.1, but a removable grub screw.

Thanks ffs. I thought mods and atties only had the kayfun lite clone from ehpro? Not the 3.1 clone?

Any leaking from the grub screw yet ffs?

[Deleted]

Dec 29, 2013 9:45:06 GMT Roscopecotrain said:

Dec 29, 2013 9:37:44 GMT @freefromsmoking said:

I got mine from Modsandatties Roscopecotrain but the postage was quite high (£7 for next day tracked was the only option available) so as Super-Shiny suggests just go with the cheapest price inc p&p. BTW the fill hole on the clone is not a valve, as on the genuine Kayfun 3.1, but a removable grub screw.

Thanks ffs. I thought mods and atties only had the kayfun lite clone from ehpro? Not the 3.1 clone?

Any leaking from the grub screw yet ffs?

They may well have sold out of the 3.1es Ross but I got mine just after Rich071 did his video review on it  ...  It is the one with the logo (I know some folk don't want this but it doesn't bother me) and comes in the black hinged presentation case with SS tank section, 510 drip tip adapter, spare O rings, screws, key chain double screwdriver and wick and wire. Everything was very clean and there were no issues with post screw threads or any of the other problems that folk have reported with the FT and VB versions. Set up with a 1.3 ohm microcoil and cotton, air flow adjusted to my liking and it vapes like a champ at 8 watts without the annoying whistle that I get from my VB Russian 91% (although that is also a great atty if you can ignore the bloody whistle) ....   highly recommended

[oldleatherlungs]

I got my 3.1 from Mods&Atties quite recently, and as I write they have 3 left in stock at £38.50.
It's the HCigar version which is brushed, not polished, but it's a high quality item and I'm very pleased with its performance.
Edit: The fill hole on the HCigar version is a valve, not a grub screw.

[Greg]

Hcigar 3.1 also here www.vapegeek.co.uk/Hcigar_c23.htm

[Roscopecotrain]

Dec 29, 2013 12:40:31 GMT oldleatherlungs said:

I got my 3.1 from Mods&Atties quite recently, and as I write they have 3 left in stock at £38.50.
It's the HCigar version which is brushed, not polished, but it's a high quality item and I'm very pleased with its performance.
Edit: The fill hole on the HCigar version is a valve, not a grub screw.

Oooo interesting. I like the idea of the fill valve over the screw. Is the hcigar one good quality? I have heard good things about hcigar stuff but i know ehpro are better at making clones.


Sent from my Galaxy Note 2

[oldleatherlungs]

Dec 29, 2013 13:07:49 GMT Roscopecotrain said:

Dec 29, 2013 12:40:31 GMT oldleatherlungs said:

I got my 3.1 from Mods&Atties quite recently, and as I write they have 3 left in stock at £38.50.
It's the HCigar version which is brushed, not polished, but it's a high quality item and I'm very pleased with its performance.
Edit: The fill hole on the HCigar version is a valve, not a grub screw.

Oooo interesting. I like the idea of the fill valve over the screw. Is the hcigar one good quality? I have heard good things about hcigar stuff but i know ehpro are better at making clones.


Sent from my Galaxy Note 2

I believe the build quality of the HCigar version is perfect, but then I have nothing to compare it with.
 
I'm not that keen on the brushed finish though, I think I would prefer the polished look of the Kernow Vapes EHPRO version, but I was also getting the stainless HCigar Nemesis clone from Mods & Atties and wanted to save a bit on postage.

You will need an 18 gauge plastic flow tip to fill the tank - don't really want to be shoving metal things into the valve. I got mine from Vape Escape (discount somewhere?) but was buying someat else from there so didn't incur extra postage.