MVP V2 Tank problem

[Grandad]

Hi all a quick question please, Have just bought my 1st mod mvp v2 been using the iclear30 tank that came with it all good. Decided to put on a diffrent tank KangerTech Evod MT3 change of juice, all screws down nicely but wont work when i press the fire button not sure if there is only certain tanks i can use on it.

Any help/Advice appreciated

Grandad

[Deleted]

www.e-cigarette-forum.com/forum/variable-voltage-apv-discussion/484548-itaste-mvp-v2-owners-group-compiled-list-tips.html

Hi , Have a look at this, they talk about tank issues, user guides it may help getting you undestanding the device.

[piper1]

It could be a poor connection, try lifting the centre pin on the MVP with a fine screwdriver or something.
It's worth ago, happens to me a lot when changing attys over.

[DiscoDes]

Probably your centre pin has been pushed down too far, you can easily prise it up gently with a small screwdriver.

Do not over tighten atomisers when putting on a device.

[Grandad]

Thankyou for quick replies on the read up seems the evod dont like the mvp and a lot of others will try to lift the mvp pin very gently see what happens, Thanks again

[Grandad]

Feb 17, 2014 22:21:14 GMT DiscoDes said:

Probably your centre pin has been pushed down too far, you can easily prise it up gently with a small screwdriver.

Do not over tighten atomisers when putting on a device.

Thanks DiscoDes wish me luck

[Perpetua]

You could also try a 510/Ego adapter Grandad . . . it spoils the appearance a smidge, but does mean you can use your Evods without having to mess with the centre pin.

[dagl]

I had the same problem see this thread-http://allaboute-cigarettes.proboards.com/thread/30542/mvp2-problem

[Grandad]

Feb 17, 2014 22:31:11 GMT Perpetua said:

You could also try a 510/Ego adapter Grandad . . . it spoils the appearance a smidge, but does mean you can use your Evods without having to mess with the centre pin.

Think i will try the 510/Ego adaptor dont really want to mess with centre pin thankyou Perpetua & dagl i thought the centre pin would of been sprung loaded to adapt for different tanks

[Perpetua]

Feb 18, 2014 9:53:42 GMT Grandad said:

Feb 17, 2014 22:31:11 GMT Perpetua said:

You could also try a 510/Ego adapter Grandad . . . it spoils the appearance a smidge, but does mean you can use your Evods without having to mess with the centre pin.

Think i will try the 510/Ego adaptor dont really want to mess with centre pin thankyou Perpetua & dagl i thought the centre pin would of been sprung loaded to adapt for different tanks

It is on some devices Grandad . . . though unfortunately not the MVP. I don't like messing with things either, normally as I break them if I do.

[Grandad]

Just ordered an adapter im to heavy handed and have fingers like pork sausages, Thanks for your help Perpetua appreciated

[Perpetua]

Feb 18, 2014 10:17:14 GMT Grandad said:

Just ordered an adapter im to heavy handed and have fingers like pork sausages, Thanks for your help Perpetua appreciated

Regrettably so do I Grandad.

And, you're very welcome.