itast SVD and Kanger Aero Tank

[pitcher500]

I'm new to vaping and this is my first ever kit and I've set it up according to a couple of youtube videos. However I got a couple of serious issues I'm not getting any vape and when I attempt to inhale all i get is juice in my mouth.

I dont what watts or voltage should I have.

thanks

[Steve (VapeStorm)]

Sounds to me like youve over filled your tank and have got liquid down the air hole, hold the aero tank upside down and blow through the mouth peice catching surplus juice in a tissue and make sure the coil head is screwed in properly

[enjay]

If you hold the button down can you hear the coil sizzling?

If you hold both of the small buttons down at the same time are you getting an ohms reading or non?

[pitcher500]

Yeah i can hear the coil sizzle, but I only filled it to half tank.

I emptied it and then took another pull and all the juice came into my mouth.

[enjay]

What cartomiser is it in the kit?

[pitcher500]

Its a kangertech aerotank airflow control.

[giles]

I'd set the watts to about 8.

If its sizzling that probably isn't the problem. Do you have to suck hard? if so, it is probably an airflow issue. Have you tried it with the airflow right open? (turn the ring at the bottom so you can see all of the three holes).

And it shouldn't matter, but it might be worth trying it without the SVD beauty ring. If that solves it then make sure the holes in that ring aren't blocked - 4 are real, and you should be able to push a needle through them. The other 4 are just decoration.

I don't have an aerotank, so I don't know what happens if you push a needle into the airholes in that, but if its like the protanks it should be fine.

[Steve (VapeStorm)]

The svd has nothing to do with the problem, slacken off the airflow control on the aerotank so the knurled ring is at the bottom, try taking a draw without firing if its fairly airy thats good if its a tight draw then its a dodgy coil head.

[enjay]

Mar 29, 2014 22:43:40 GMT pitcher500 said:

Its a kangertech aerotank airflow control.

I realised that after I posted, you stuck it in the thread title, doh! Lol

[pitcher500]

Sorry been at work, i think its working now. Played around with airflow and i think the coil might not have been in the slot properly.

But ive put the fluid through the top where you smoke through it and have no leaking but when i put it through the bottom i still get leaking. Dont know why though.

[Greg]

Mar 30, 2014 17:44:50 GMT pitcher500 said:

Sorry been at work, i think its working now. Played around with airflow and i think the coil might not have been in the slot properly.

But ive put the fluid through the top where you smoke through it and have no leaking but when i put it through the bottom i still get leaking. Dont know why though.

The last place you want to put fluid is "through the top where you smoke through" only air and vapour should travel up that tube, think of it like a bum, one way travel only 

If your putting liquid in the top through the drip tip that would explain why your getting juice in your mouth, stop this practice immediately 

When you say it leaks when you fill from the bottom, where is it leaking from ?

[pitcher500]

I'm the thickest newbie.

We'll stop that practice straightaway, i was getting juice when I was pulling on it in my mouth.

But touchwood its working all right.

Using some Dekang 555 tobacco juice, doesn't taste like tobacco at all its got a proper nutty flavour to it.

[Karma]

You will already know a great deal that is on this thread pitcher500 but it may be worth bookmarking for future reference

allaboute-cigarettes.proboards.com/thread/28309/pics-vids-get-started-abbreviations?page=1&scrollTo=513677

[pitcher500]

Thanks for the advice on the thread.

I've got it finally working.


Now its time to find the right juice. 

[djs]

Mar 31, 2014 21:10:40 GMT pitcher500 said:

Thanks for the advice on the thread.

I've got it finally working.

YES! Get in...