The AeroDripper - Interesting or pointless?

[OliverB]

A dripper which uses the Aerotank base and standard Kanger coils.

Don't think there's a UK stockist yet.

www.steammonkey.com/Aero_Dripper_Complete_p/uamp-adwb.htm

[Bob]

Interesting for those who don't rebuild and would work out cheaper in the long run than buying 510 attys

[BrenD]

I'll get one if they turn up over here.

Sent from my HTC One_M8 using proboards

[bluemagnum]

I just ordered one. I'll report back what it's like.
Thanks for the heads up Oliver.

[Perpetua]

Interesting I think Oliver . . . wonder if we'll be seeing more of these type of drippers, along with tanks that take a variety of heads in the future.

[steammonkey]

Jun 14, 2014 18:39:05 GMT Perpetua said:

Interesting I think Oliver . . . wonder if we'll be seeing more of these type of drippers, along with tanks that take a variety of heads in the future.

That's the plan  

[Deleted]

Interesting I think , but depends on how good it works.

[Perpetua]

Jun 14, 2014 18:54:57 GMT steammonkey said:

Jun 14, 2014 18:39:05 GMT Perpetua said:

Interesting I think Oliver . . . wonder if we'll be seeing more of these type of drippers, along with tanks that take a variety of heads in the future.

That's the plan  

Good stuff steammonkey, you might want to think about applying for Vendor status on the forum.

[bluemagnum]

Mr steammonkey, thank you for shipping my dripper so swiftly

[Bob]

steammonkey, notice mine has left you as well, Texas seems to be a vapers paradise, quite a few sources over there, I also deal with Strix Elixirs, but what we could do with is distributors over here that will take US wares and not charge us £1 = $1.

[geordie_vaper]

i cant see it working that well if i am honest, just for the size of wick you get in a kanger head, i coukd inaging getting alot of dry hits and will have to drip every 3-4 vapes.

still interesting and good on them for making somthing newish kind of

[csmith10]

Jun 15, 2014 17:22:41 GMT geordie_vaper said:

i cant see it working that well if i am honest, just for the size of wick you get in a kanger head, i coukd inaging getting alot of dry hits and will have to drip every 3-4 vapes.

still interesting and good on them for making somthing newish kind of

The kanger heads are pretty easy to recoil with cotton and micro coil

[geordie_vaper]

yeah i know but then why not get a real dripper and coil and wick it yourself, instead of getting that taking out the coil and wick in the head replacing it then going

[lardarse]

Home made one, ego cone on aerotank base, drip tip from an old clearo

[djs]

It's not a bad idea. (is it?)

The trouble with all this stuff is things are getting very confusing.

If I didn't want to make wire/wick (coils) for a dripper, I'd just use some ready-made silica 1.8ohm.

Ideally, a dripper works good with a coil you can pull the cotton wool out of and re-wick.

using a Kanger coil could be sensible (and cheaper than lots of 306s)... but ultimately it's going to cost a bit much. One bad juice and that might be the end of the coil head.... unless they soak clean/dry burn... which is faffing around rather too much.

???