Cigabuy - Kanger subohm Mini

[Bobsbeer]

I've been holding off on this, but seeing the lower price on the mini made me press go. Having a few decks would be good so it's a shame they don't stock them. But at least I'll have one to play with. Thanks for the advice.

[Tom]

Feb 16, 2015 21:33:15 GMT letsavit said:

Feb 16, 2015 21:30:41 GMT Tom said:

Mainly airflow.

Now I've realised how easy the OCC head build is, I'm just going to use those on it.

Considering a nano also

I'm only doing old fashion wire on the OCC, nickel on the deck where I can get a solid connection..  

Nickel on the mini rba deck is my tomorrow fun

How you been building it?

[letsavit]

Feb 16, 2015 21:34:44 GMT Tom said:

Feb 16, 2015 21:33:15 GMT letsavit said:

I'm only doing old fashion wire on the OCC, nickel on the deck where I can get a solid connection..  

Nickel on the mini rba deck is my tomorrow fun

How you been building it?

Pretty much as your guide with .2 nickel around a 2.4+ screwdriver and about 8 wraps, as long as I'm above .3....lower was give one me trouble and didn't seem as accurate with regards to temp. Not that I really understand what the DNAs doing, just user experience. 

[Tom]

Feb 16, 2015 21:42:41 GMT letsavit said:

Feb 16, 2015 21:34:44 GMT Tom said:

Nickel on the mini rba deck is my tomorrow fun

How you been building it?

Pretty much as your guide with .2 nickel around a 2.4+ screwdriver and about 8 wraps, as long as I'm above .3....lower was give one me trouble and didn't seem as accurate with regards to temp. Not that I really understand what the DNAs doing, just user experience. 

microcoil?

I was going to go with a spaced coil just for the coverage.

If your getting a good vape from a microcoil on it, I will go that way.

[Greg]

Feb 16, 2015 21:28:26 GMT letsavit said:

Feb 16, 2015 20:15:58 GMT Greg said:

I suppose that's one advantage of bringing the 25mm out first which I never bought, they made all the mistakes on that 

That is true from what I have read but mines been fine, well except the melting insulator....! What's you and Tom dislike of the full size, the air flow or the deck? 

Edit; how many watts you guys pushing these too? 

I don't have the 25mm letsavit but I hear the airflow is less due to a smaller air tube in the tank in RBA mode. Also I'd imagine it's a bit of a faff changing the top caps if you just want to throw an OCC in after using RBA. With the mini you use the same top cap what her in OCC or RBA mode. I'd imagine you get on with the 25 as your not a lung inhaler so greater airflow unlikely an issue for you.
I run the mini in RBA at 23 watts with full airflow.
Sorry for the slow reply, I was setting the Squonker up 

[Tom]

Feb 16, 2015 21:47:41 GMT Greg said:

Feb 16, 2015 21:28:26 GMT letsavit said:

That is true from what I have read but mines been fine, well except the melting insulator....! What's you and Tom dislike of the full size, the air flow or the deck? 

Edit; how many watts you guys pushing these too? 

I don't have the 25mm letsavit but I hear the airflow is less due to a smaller air tube in the tank in RBA mode. Also I'd imagine it's a bit of a faff changing the top caps if you just want to throw an OCC in after using RBA. With the mini you use the same top cap what her in OCC or RBA mode. I'd imagine you get on with the 25 as your not a lung inhaler so greater airflow unlikely an issue for you.
I run the mini in RBA at 23 watts with full airflow.
Sorry for the slow reply, I was setting the Squonker up 

and I didn't notice you added the watts bit.

Between 20w & 25w seems to be the sweet spot for me

[letsavit]

Feb 16, 2015 21:46:44 GMT Tom said:

Feb 16, 2015 21:42:41 GMT letsavit said:

Pretty much as your guide with .2 nickel around a 2.4+ screwdriver and about 8 wraps, as long as I'm above .3....lower was give one me trouble and didn't seem as accurate with regards to temp. Not that I really understand what the DNAs doing, just user experience. 

microcoil?

I was going to go with a spaced coil just for the coverage.

If your getting a good vape from a microcoil on it, I will go that way.

Spaced, always stuck with spaced on nickel mate... 

I dont know if this proved something or not, maybe i just confused the board? but I did an 8 wrap coil and pinched half (4) test, used it and it vaped fine but the cotton was burnt only on the pinched part. 

[letsavit]

Feb 16, 2015 21:47:41 GMT Greg said:

Feb 16, 2015 21:28:26 GMT letsavit said:

That is true from what I have read but mines been fine, well except the melting insulator....! What's you and Tom dislike of the full size, the air flow or the deck? 

Edit; how many watts you guys pushing these too? 

I don't have the 25mm letsavit but I hear the airflow is less due to a smaller air tube in the tank in RBA mode. Also I'd imagine it's a bit of a faff changing the top caps if you just want to throw an OCC in after using RBA. With the mini you use the same top cap what her in OCC or RBA mode. I'd imagine you get on with the 25 as your not a lung inhaler so greater airflow unlikely an issue for you.
I run the mini in RBA at 23 watts with full airflow.
Sorry for the slow reply, I was setting the Squonker up 

Yea air flow fine for me but changing the top is why I now have 3 minis and only the one orignal full size.. 

[dreamylittledream]

Feb 16, 2015 21:30:41 GMT Tom said:

Feb 16, 2015 21:28:26 GMT letsavit said:

That is true from what I have read but mines been fine, well except the melting insulator....! What's you and Tom dislike of the full size, the air flow or the deck? 

Edit; how many watts you guys pushing these too? 

Mainly airflow.

Now I've realised how easy the OCC head build is, I'm just going to use those on it.

Considering a nano also

The nano is a fab little tank - only bought mine on a whim as they were £13.50 from 3avape but its been seriously rivalling my Lemo drops for work.  Looks the absolute business on a Vaporshark DNA30 or istick

[Perpetua]

Feb 17, 2015 0:02:35 GMT dreamylittledream said:

Feb 16, 2015 21:30:41 GMT Tom said:

Mainly airflow.

Now I've realised how easy the OCC head build is, I'm just going to use those on it.

Considering a nano also

The nano is a fab little tank - only bought mine on a whim as they were £13.50 from 3avape but its been seriously rivalling my Lemo drops for work.  Looks the absolute business on a Vaporshark DNA30 or istick

Brilliant thank you dreamylittledream . . . I've a Nano on the way from Myepack, having embraced these Sub Tanks with a passion, I couldn't wait for China to re-open on this occasion.

There'll be the obligatory spare to buy though.

[Deleted]

I haven't tried the Nano, but the mini and large one have been excellent