Personal dripper reccomendations

[Tom]

I'm after a new dripper...

I have a marquis, derringer & freakshow mini.

I love the marquis but find the draw a bit tight on fully open.

I love the flavour on the derringer and freakshow but I find they both perform best in single coil and are a little limited on build space and juice capacity.

I'd like something with a bit more air, a bit more room to play with and a decent juice well, would also like it to be pretty leak resiliant as I plan on this being a bit of an out and about dripper.

RDAs that have caught my eye and may fit the bill:
FT Velocity Clone
Troll

Any suggestions much appreciated

Draw - Airy

Mouth to lung or Lung inhale? - Lung inhaler

Flavour or Clouds - Mostly flavour

Power - 30-50w normally

Size - 22mm full size dripper

Coils - prefer dual coiling on a 4 post deck, single coils on 3 posts - dont mind either depending on what works best for the atty.

Experience and ease of use/build - Old time vaper and builder, I'll have a go at anything.

Budget - Sub £30 original or clone

I dont mind waiting for chinese delivery for the right price savings.

Kudos to profbeard for the tips on how to ask this sort of thing
allaboute-cigarettes.proboards.com/thread/55532/before-asking-which-dripper?page=1&scrollTo=962618

Cheers folks

[Deleted]

I only have one dripper and that's a Mephiesto ( probably spelt wrong) but I don't know if i just got lucky or they are a good dripper. Plenty of space for the build which is a double coil set up coming out at 1ohm as its used mainly when testing juices after mixing. ( quite a airy draw) oh and it's a clone which  cost under $10

Oh just remembered I also have a Derringer which I plan to attack with a dremel, converting it to b/f, but still unused at present.

[blakey]

Look no further than here www.fasttech.com/p/2482500

[PinkyPuff]

I just got Pyrro and like it a lot,more then my favourite Plumeveil.

[Tom]

Jun 21, 2015 9:35:54 GMT blakey said:

Look no further than here www.fasttech.com/p/2482500

Might have to give this a go.

Maybe in black - looks cool

[Deleted]

Popped one in the basket as the black can be b/f, stocking up on my B/F attys for the Squonker onslaught !

scratch that, already ordered elsewhere 

bought this one from Focalecig, as it comes with b/f pin and I can use it in both modes.

Velocity

[Tom]

Jun 21, 2015 10:15:07 GMT car147 said:

Popped one in the basket as the black can be b/f, stocking up on my B/F attys for the Squonker onslaught !

scratch that, already ordered elsewhere 

bought this one from Focalecig, as it comes with b/f pin and I can use it in both modes.

Velocity

That has sealed the deal for me.

The one that comes with the bottom feed pin.

www.fasttech.com/products/2513500

I dont have a squonker but nice to be ready for when I do - @windows squonky stuff is looking more appealing by the second!!

[blakey]

Jun 21, 2015 10:15:07 GMT car147 said:

Popped one in the basket as the black can be b/f, stocking up on my B/F attys for the Squonker onslaught !

scratch that, already ordered elsewhere 

bought this one from Focalecig, as it comes with b/f pin and I can use it in both modes.

Velocity

I got the silver from ft complete with bottom feed pin

[Tom]

Jun 21, 2015 11:08:58 GMT blakey said:

Jun 21, 2015 10:15:07 GMT car147 said:

Popped one in the basket as the black can be b/f, stocking up on my B/F attys for the Squonker onslaught !

scratch that, already ordered elsewhere 

bought this one from Focalecig, as it comes with b/f pin and I can use it in both modes.

Velocity

I got the silver from ft complete with bottom feed pin

You have it already blakey?

If you are able to any chance you could tell me what size the allen screws are?

Ive been searching around but cant find the info

[drunkenbum]

I can't recommend the troll highly enough. Can't put nine down

[blakey]

Jun 21, 2015 11:13:07 GMT Tom said:

Jun 21, 2015 11:08:58 GMT blakey said:

I got the silver from ft complete with bottom feed pin

You have it already blakey?

If you are able to any chance you could tell me what size the allen screws are?

Ive been searching around but cant find the info

Yes I have it but I'm not at home mate, sorry.

[Tom]

Jun 21, 2015 12:02:34 GMT blakey said:

Jun 21, 2015 11:13:07 GMT Tom said:

You have it already blakey?

If you are able to any chance you could tell me what size the allen screws are?

Ive been searching around but cant find the info

Yes I have it but I'm not at home mate, sorry.

No worries - no rush

[Get Off My Cloud]

The Velocity is a winner, only drawback is no option for single coil, the top airflow holes kill the flavour also if used wide open.

The Swirlfish is another good atty, nice deep juice well about 5 or 6 mm, side and top airflow options, nice big flat bottomed screws, single or dual coil option, only takes standard 510 drip tips though.

Twisted Messes is another goodun, nice deep juice well, four posthole design, lots of top cap options, single and dual coil options, depending on the kit you buy you get several different sleeve colours, extra insulators, etc

El Cabron pretty similar to the Twisted Messes atty, comes from the same company.

Aeolus is decent, good out and about atty top airflow makes it pretty much leak free, fairly deep juice well like 3 or 4mm, again 510 drip tip only, single or dual coil options.

Yep RDA great for someone who gets drip happy, massive juice well like 6 or 7mm deep, 4 post hole design, comes with a nice wide bore delrin drip tip although i believe adapters are available for 510 drip tips, good airflow, single or dual coil options.