Looking for new tank .... had enough of Innokin iSub tanks

[doctorjellybean]

I really had enough of the Innokin iSub tanks due to the constant leaks. Maybe it's just me, but no matter which one I use, I get a leak. If I use the ones with the airflow at the bottom, it leaks through that. If I use the one with the airflow at the top, it still leaks somewhere. Maybe the juice is too thin, but it is my favourite juice and I'm not changing that.

So now I'm looking for another tank. Top filling would be nice, as I like that in the iSub. Some of the ones I'm looking at are:

Sense Herakles Plus
Smok TFV4
Uwell Crown 2

Any others worth consideration? I use the Innokin Disrupter mod.

[tim]

Not got any of those, but the Geekvape Griffin, Ehpro bachelor, and Wismec Theorem are all top fill and are very good. The Griffin will leak if you wick it wrong, but the others don't.

If you want a really good RDTA, and can live with bottom fill, you can't go wrong with a Steamcrave aromamizer.

A few of these tanks with various size choices.

[Jerri]

If it's leaking because the juice is too thin then it will
Leak in most subtanks as they're built for high VG juices.

What is the ratio of the juice?

I use 70% VG in my iSub G and have never had a leak (touch wood!). I had the crown for all of an hour and didn't rate it so can't help on which to recommend sorry.

Will the disrupter be powerful enough to run the TFV4?

[flavourtank]

Jul 17, 2016 19:47:13 GMT doctorjellybean said:

I really had enough of the Innokin iSub tanks due to the constant leaks. Maybe it's just me, but no matter which one I use, I get a leak. If I use the ones with the airflow at the bottom, it leaks through that. If I use the one with the airflow at the top, it still leaks somewhere. Maybe the juice is too thin, but it is my favourite juice and I'm not changing that.

So now I'm looking for another tank. Top filling would be nice, as I like that in the iSub. Some of the ones I'm looking at are:

Sense Herakles Plus
Smok TFV4
Uwell Crown 2

Any others worth consideration? I use the Innokin Disrupter mod.

Hello

From personal experience I found the following with these tanks:

Sense h did spit a lot and gurgled to much for my liking.

Tfv4 likes to drink juice with the higher wattage coils but is a nice tank.

Crown 2 is something I haven't had so can't comment.

[gill2009]

  'Had enough of Innokin iSub tanks'...does not compute...I love them...maybe just me  

[drunkenbum]

Jul 17, 2016 19:47:13 GMT doctorjellybean said:

I really had enough of the Innokin iSub tanks due to the constant leaks. Maybe it's just me, but no matter which one I use, I get a leak. If I use the ones with the airflow at the bottom, it leaks through that. If I use the one with the airflow at the top, it still leaks somewhere. Maybe the juice is too thin, but it is my favourite juice and I'm not changing that.

So now I'm looking for another tank. Top filling would be nice, as I like that in the iSub. Some of the ones I'm looking at are:

Sense Herakles Plus
Smok TFV4
Uwell Crown 2

Any others worth consideration? I use the Innokin Disrupter mod.

What juice are you using? What's the vg/pg ratio?

[Greg]

I never had an issue with the isub g and thin juice, I used AG exclusively so my juice was always thin

[dalealan]

I'm liking the tfv4s but there seems to be a lot of love for the serpent minis if you don't mind coiling and wicking. www.fasttech.com/products/4613300

[joeten]

No issues here with the ISubG, as said it may be the juice.

[doctorjellybean]

I don't know what the ratio is. This is the juice:

www.eliquidworld.co.uk/Old-Hoby-Ancient-eliquid-20ml

[GunJack]

www.eliquidworld.co.uk/Hangsen-E-Liquid

80-20 PG/VG, incidentally it's the same as I mix my own at. That said, I don't use any sub-ohm tanks, partly 'coz I can't stand high-VG juice which seems to be essential for the way the tanks & coils are designed to work. I only use protank2/3/aerotanks or clones thereof as I MTL vape, and don't have a problem, but that's more like the juice these tanks were designed for.

[DiscoDes]

*********************** THIS FLAVOUR IS BEING DISCONTINUED ***********************

Due the incoming Tobacco Product Directive, we have received notification from Hangsen that this E-Liquid flavour will not be produced after 20th November 2016.

Therefore once our current stocks are gone, it will no longer be available to buy from E-Liquid World.

If this is one of your favourite flavours, please contact us via email if you would like to bulk buy and stock up whilst it is still in production

[SteveF]

I won't jump in and say... its the juice but tbh I'd say its probably the juice.
Subtank coils aren't really intended for high PG, they are meant to wick higher vg.
I had loads of issues trying to use 70/30 80/20 last year in a subtank mini, leak city.

I wouldn't recommend a TFV4, temperamental as my ex-wife, leak like an incontinent pensioner, most of the coils need wedges of power to get them working as they should ie cloud machine. The mini is just as bad.

Kanger ST is much more versatile but by the sounds of it you need a airy m2l or a restricted dl. Sure people will come up with a short list of suitable tanks.

[TJ]

Hmm, I've never had a problem with mine leaking either but I use 30/70 in mine. I don't sub ohm on it, I use the 2ohm coils at the moment until they run out (i may have bought a stash) and still haven't mastered MTL on them as for some reason it makes me cough like mad even with my 3-4mg liquids but DTL is fine so I just use it for that. No leaky pants here.

Edited to add, may be a long shot but you can get a pretty airy vape from just a Cubis tank and I cannot see how that could possibly leak unless you left it tipped on it's head for any length of time? Cheap as chips as well.

[cheezyvapes]

i would highly suggest tobeco mini super tank. takes atlantis style coils. super easy to find! i vape 70/30 and had no problem with aspire coils. really good tank to drive with.