Flooding Cart in DC Tank.

[harmudge]

Hi guy's,

I hope someone can tell me where I'm going wrong with this carto.

I put a new carto in my DC tank last night and it was vaping well...loads of vapour and flavour.
I took the same carto and tank combination to work today and all was well until this afternoon...on the way home from work I noticed that it was getting harder to get a pull and the vapour and flavour were really dropping off, so I un-screwed said carto-tank and noticed a pool of juice on the top of my Provari...so I blew through the carto while it was un-screwed and there was a lot of juice coming from the bottom end.
I left it un-screwed for a while (1hr) hoping that any juice left in the air pipe of the carto would evaporate...so I have just re-attached the carto and tank to my Provari again and it is still flooding.

Can anyone explain to me whats up ??

Many thanks.

[Karma]

Is it a flanged carto in the tank?

If you don't get the flanged bit right into where the grooves are then it will leak

I usually get on well with DCTs but have read a few posts about poeple having trouble with them. Sometimes it seems you just get a rouge carto

[harmudge]

Many thanks Karma.
It's a flanged carto.

I think I may have found a possible solution to the problem...it may be air pressure building up.
I took the carto out slightly and then re-inserted and it seems to be fine now....keeping my fingers crossed...

[Karma]

With my DCT I occasionally take it off the battery, hold a tissue over the end, then suck

It forces the juice into the wadding and air out

hope it keeps working for you

[harmudge]

Good tip karma