|
Post by ryansbennett on Aug 25, 2012 23:55:34 GMT
I bought a Riva 1100 kit which came with two batteries (1100mah, for what that might mean to people.) It also came with a clearomiser and 5 cartomisers. Once I was used to them all, they all worked fine. The battery I was using for the clearomiser (for the sake of clarity, Battery One) went flat, so I plugged it into charge and put the clearomiser on to the other battery (Battery Two) which had a cartomiser on. Battery Two has worked fine with the clearomiser in the past (granted, about 5 days now) but for some reason it's not working at all now. It lights up but has no reaction with the clearomiser at all. Battery One still works fine with the clearomiser (and cartomiser) and Battery Two still works fine with cartomisers.
Has any one any advice why a battery would suddenly start refusing to work with clearomisers? (I've also tried Battery Two on a different clearomiser which still yields no results.)
Thank you all!
|
|
|
Post by Perpetua on Aug 26, 2012 0:00:40 GMT
|
|
|
Post by Chrissie on Aug 26, 2012 0:01:51 GMT
Just about to go to bed, so may not make much sense Firstly try cleaning the battery contacts & secondly, the contact pin might have got pushed down through screwing on the clearomiser too tightly & may need raising -
|
|
|
Post by Chrissie on Aug 26, 2012 0:03:14 GMT
Lol Perpy, I crossed posts
|
|
|
Post by ryansbennett on Aug 26, 2012 0:05:38 GMT
Thank you, Perpetua! That worked fantastically. Not to mention I learnt something for keeping them going longer! =]
|
|
|
Post by ryansbennett on Aug 26, 2012 0:06:22 GMT
Also, thanks Chrissie! You might have been a little late, but it's still mighty appreciated. =]
|
|
|
Post by Chrissie on Aug 26, 2012 0:07:32 GMT
You are so welcome Ryan
|
|
|
Post by Perpetua on Aug 26, 2012 12:24:13 GMT
Delighted to hear it worked Ryan.
|
|