New VV and Variable Wattage device from Zainy

[robby]

Nov 21, 2012 22:30:27 GMT DiscoDes said:

I read a review earlier linked on Nu-Vapour from a German review and they really put it through it's paces even using an oscilloscope to check the outputs and they were spot on as they could be. Also the Guys in the forum said how well built they were and had good thick walled tubes. The only downside they said were the rubber buttons that whilst they worked well they thought it slightly detracted from the overall quality and the buttons are "clicky".

I'll see if I can get a link and you'll have to use Google translate (with some hilarious results) but you'll get the jist, it is quite technical in parts however.

Edit: Vamo Complete test will automatically translate from german to English (sorta)

Yess, read that one Dez, it needs another translation lol. The buttons are clicky, personaly I dont see what the problem is with that, I like a nice positive action on the button. I like the weight too, there is a lot of metal there to dissipate any heat inside the thing and at the current and power this thing can run at, it can be quite high.

[DiscoDes]

WOOHOO!

"2012-11-22 08:43:00 UNITED KINGDOM COVENTRY PARCELFORCE Released from Customs"

[greendollar]

Nov 22, 2012 11:25:16 GMT DiscoDes said:

WOOHOO!

"2012-11-22 08:43:00 UNITED KINGDOM COVENTRY PARCELFORCE Released from Customs"

so close yet so far , well done DD

[Roger]

Nov 22, 2012 11:25:16 GMT DiscoDes said:

WOOHOO!

"2012-11-22 08:43:00 UNITED KINGDOM COVENTRY PARCELFORCE Released from Customs"

[maccafan]

Have a look down your battery tube where the posi pin is before putting your battery in it for the first time.



If it looks like the picture above with a small hole use button top batteries only..Apparently this issue has now been addressed with a wider hole and/or a insulator, but just in case any of you got one of these.

This is the fix:

[robby]

Thanks Macca, mine has both a wider hole and an insulator. Thrilled to bits with the whole thing.

[robby]

Nov 22, 2012 13:56:22 GMT maccafan said:

Have a look down your battery tube where the posi pin is before putting your battery in it for the first time.



If it looks like the picture above with a small hole use button top batteries only..Apparently this issue has now been addressed with a wider hole and/or a insulator, but just in case any of you got one of these.

This is the fix:

Yes, that`s just how mine looks, thanks for the pics

[robby]

Mine in mini mode with a Bully atomiser on top at 8 watts

[-V-]

This is making me so sad, I have one of these just an hour away from where I live, but as it's the 'Customs' building I won't ever be seeing mine

[robby]

Nov 22, 2012 14:30:50 GMT -V- said:

This is making me so sad, I have one of these just an hour away from where I live, but as it's the 'Customs' building I won't ever be seeing mine

It is vaping like a DREAM!!!! love it!!! lolol

[robby]

Found out something interesting about this today. It appears to have RMS and AVE mode. If you press the minus or plus button for over 10 seconds it shows Mode 1 or Mode 2. The VV or VW mode has a different way of switching. Dont really have any way of testing, dont have a scope etc. I should add that it wasnt mentioned on Zainy`s site, but they do miss stuff lol, even as important as that.

[robby]

Nov 22, 2012 14:30:50 GMT -V- said:

This is making me so sad, I have one of these just an hour away from where I live, but as it's the 'Customs' building I won't ever be seeing mine

Did you get it from Zainy?

[-V-]

I did, but it was in a large shipment which was seized by Thai customs, they won't let it out and say they will destroy both packages.
E Cig stuff is banned in Thailand, the usual everyday small packages get through no problems, but any pig ones get checked, and both of mine got hit on the same day.

Out here if you have the contacts and a few quid it can be sorted, but I don't have such contacts in the customs.

[-V-]

Is this the same thing as the one you guys have got?
www.healthcabin.net/index.php?main_page=product_info&cPath=1132&products_id=8190

[robby]

Nov 22, 2012 15:03:44 GMT -V- said:

I did, but it was in a large shipment which was seized by Thai customs, they won't let it out and say they will destroy both packages.
E Cig stuff is banned in Thailand, the usual everyday small packages get through no problems, but any pig ones get checked, and both of mine got hit on the same day.

Out here if you have the contacts and a few quid it can be sorted, but I don't have such contacts in the customs.

Oh, really sorry about that, I thought you were UK.