EGO 900mah batteries

[Phoenix .]

have just bought these as a back up to my back ups.

The thing is , I cannot get any of my clearomisers to fit, is it me, or are they not 510 fittings?

It isn't taking much to confuse me lately, am I missing the obvious?

[FirinBlanks]

They should definitely fit?

[Phoenix .]

They don't and I have just tried fitting my Boges carto and they don't fit either?

I have sent message to vendor last night but heard nothing back as yet.
Has anyone else bought these, have you had any problems with the fittings?
What the devil does fit them? I think these will be going back...pronto

[gordy180]

i have ego batteries and everything ive tried with a 510 fitting works ok

[Karma]

Do you have a link to the batteries you bought?

[Phoenix .]

They are the embossed ones from Paradise Vape karma

[Malibu]

My embossed ones are from paradise vape and my vison V3's fit fine on them.

[Karma]

I can't understand it phoenix. I have some PV ones and everything is fine on them although on one of the batteries I need to regularly raise the centre pin as it keeps sinking

[Phoenix .]

Update;

I tried everything on 1 batt and nothing worked, now tried the other 2 and they are ok, what a relief!

So, it just 1 that is duff, it won't even screw on so it has nothing to do with the centre pin ans the boge wont screw in either, I cannot for the life of me see any difference in the screw fitting so I don't know what the problem is.

I thought it was funny as I have EgoT and C and everything works on them!
Another thing that is different is the variable power, it only goes to blue?

[Phoenix .]

Thanks for your input everyone.

[Malibu]

James is a good vendor, I'm suer he will sort things out t for you

[Perpetua]

I've had a few 510 fittings that are very particular over what 510 connector they're screwed into, which is annoying, even using adapters hasn't worked.

Though I've managed to find something they'll fit into, I've put it down to the inconsistent Chinese quality control on some of our gear.

But I'm sure James will sort your problem out Phoenix.

[dave]

I've also had the odd 510 connector that was very picky, although I have found that usually sticking a 510-510 adaptor on them does the trick.

[Phoenix .]

I have not heard of this before- adaptor for the 510? Just had a look and Jason has them, will get a couple after xmas.


Will not be needing these now!

[chykensa]

I'm not an expert, but is it worth checking that the centre pin is not too high? I've read elsewhere that sometimes it gets stuck in the low position, but it might also be stuck too high - this might not connect properly.
Glad your other battery works though - nothing more frustrating than having new gear which doesn't work!
Andy