Tay
New Member
Joined:January 2013
Posts: 31
Location:
Recent Posts
Last Online Oct 31, 2014 10:45:25 GMT
|
Post by Tay on Feb 2, 2013 17:48:49 GMT
Ok, I've been looking for a thread on attys as I'm sure this must have been asked before, but can anyone explain to me in simple terms what they are and how you use them?
We both have Riva 1100's and need to know if the Bauway 306 LR with a 306 drip tip will work and how to use on the battery? Is this all you need or do you need some other bit of kit?
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online Nov 23, 2024 4:59:24 GMT
|
Post by Deleted on Feb 2, 2013 18:08:53 GMT
should be fine lr on anything below a 650 can kill your battery it will draw more current and drain battery quicker but should be ok 306 dripper with a drip tip of the same is all you need really the plastick drip one that came with mine splits easilly so www.safercigs.co.uk/306_Drip_Tips/cat705284_871233.aspx these maybe an improvement
|
|
Tay
New Member
Joined:January 2013
Posts: 31
Location:
Recent Posts
Last Online Oct 31, 2014 10:45:25 GMT
|
Post by Tay on Feb 2, 2013 18:29:14 GMT
Thanks Colli. I can't see how it all fits together though, do you put the atomiser on the battery, and then the drip tip? Or do you need something else? Got no idea what I'm doing here lol Any advice appreciated guys, think I may be a bit thick. Tried to find a thread that explains it all, or a video, but can't seem to find one. Do people usually use atomisers or are the clearos and cartos mostly used? It's all very confusing ??? Thanks in advance
|
|
4madcats
VENDOR
Sic 'em Kitty
Joined:October 2012
Posts: 1,072
Location:
Likes: 525
Recent Posts
Last Online Jun 17, 2014 10:57:49 GMT
|
Post by 4madcats on Feb 2, 2013 18:30:13 GMT
Atty = Atomiser, in it's most basic form it's the bauway you already have & will only hold a few drops at a time. You just screw it on to your battery & drip 5/6 drops into it & vape. You can drip through the drip tip, but I find I'm sucking up juice if I do that Clearomiser (clearo) = Atomiser + clear tank, will typically hold anything from 1.5ml > upwards of 3.5ml. CE4/5, Kanger T2/3, MT3, Viva Novas are all different makes of clearo. Some of them have replaceable/rebuildable heads (the wick & coil part) so they can be re-used. The majority of peeps use some form of clearo, based on personal preference, just because your not constantly having to drip. Cartomiser (carto) = Atomiser + solid tank with a filler in it. Boge cartos fit this category. Bit more fiddly to fill & you can't see when they need topping up, plus they don't generally hold as much as a clearo, usually only up to 2ml max. Some vendors sell pre-filled cartos but the range of flavours is usually pretty small, although you can refill them yourself. Both these systems come in different resistance's (ohms), but a general guide if you have a choice would be 2.4 ohms for a riva battery, don't worry to much if something is higher 2.8 or lower 1.8 these will both still work on you batteries, but the lower resistance will drain batteries faster. Beyond this your getting into rebuildable atomisers which can be rebuilt infinitely, but generally cost a lot more, some getting into the 3 figure mark. Vapescape carries all of the above, if you want to see what they all look like. Just carry on going through the threads & you'll get a better idea of what everything means.
|
|
Karma
Part Time Staff
Lorraine
No Longer a Vapefest Virgin
Joined:January 2012
Posts: 21,980
Location:
Likes: 7,589
Recent Posts
Last Online May 27, 2016 17:25:37 GMT
|
Post by Karma on Feb 2, 2013 18:37:58 GMT
|
|
Karma
Part Time Staff
Lorraine
No Longer a Vapefest Virgin
Joined:January 2012
Posts: 21,980
Location:
Likes: 7,589
Recent Posts
Last Online May 27, 2016 17:25:37 GMT
|
Post by Karma on Feb 2, 2013 19:00:54 GMT
This may help too
|
|
Tay
New Member
Joined:January 2013
Posts: 31
Location:
Recent Posts
Last Online Oct 31, 2014 10:45:25 GMT
|
Post by Tay on Feb 2, 2013 19:33:37 GMT
Yep ......... By jove I've got it! Thanks all, and Karma the links were great. Now to try my diff flavours. Knew I'd get my answers on here. Just me being thick again.
|
|
Karma
Part Time Staff
Lorraine
No Longer a Vapefest Virgin
Joined:January 2012
Posts: 21,980
Location:
Likes: 7,589
Recent Posts
Last Online May 27, 2016 17:25:37 GMT
|
Post by Karma on Feb 2, 2013 19:38:08 GMT
You're not thick at all Tay! Don't worry about asking questions, it's a steep learning curve and we're all learning all the time as it seems that every day something new comes out
|
|
Tay
New Member
Joined:January 2013
Posts: 31
Location:
Recent Posts
Last Online Oct 31, 2014 10:45:25 GMT
|
Post by Tay on Feb 2, 2013 19:52:42 GMT
Thanks Karma Just that everyone seems to know what they're doing and I feel like a right pleb sometimes! I'm sure I must be asking stuff that's been asked a million times before and can never even seem to find the right thread I need without asking. Thank God for you guys is all I can say.
|
|
Karma
Part Time Staff
Lorraine
No Longer a Vapefest Virgin
Joined:January 2012
Posts: 21,980
Location:
Likes: 7,589
Recent Posts
Last Online May 27, 2016 17:25:37 GMT
|
Post by Karma on Feb 2, 2013 19:55:53 GMT
There is a lot of collective knowledge here Tay, but I doubt that any one of us knows everything
|
|
djs
Super Member
Puffing on the RY4 today.
Joined:October 2012
Posts: 9,413
Location:
Likes: 5,874
Recent Posts
Last Online Oct 29, 2019 6:13:03 GMT
|
Post by djs on Feb 2, 2013 19:56:30 GMT
Ok, I've been looking for a thread on attys as I'm sure this must have been asked before, but can anyone explain to me in simple terms what they are and how you use them? We both have Riva 1100's and need to know if the Bauway 306 LR with a 306 drip tip will work and how to use on the battery? Is this all you need or do you need some other bit of kit? Call me over-cautious, but a good few of us won't use a Low Resistance atomizer on a Riva. If your LR atty is 1.8 it'll be fine. If it's really a "low" low resistance, that may not be sensible. I always have two 306 attys ready to use. LR and SR. The SR is just as good for flavour (well, 95%) and I only use LR on a Lavatube. If in doubt, just go with a SR. I reckon a 1.5-1.6 atty on a freshly charged Riva could be producing over 10 watts of "uncontrollable" power. or, put another way, if I put a 1.6 ohm atty on my Lavatube, there's not much chance I will go higher than 3.6,3.7, 3.8 (?) volts. If your Riva is charged and kicking out 4+ volts, you atty won't last long. Nor will your battery life....
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online Nov 23, 2024 4:59:24 GMT
|
Post by Deleted on Feb 2, 2013 20:07:08 GMT
Ok, I've been looking for a thread on attys as I'm sure this must have been asked before, but can anyone explain to me in simple terms what they are and how you use them? We both have Riva 1100's and need to know if the Bauway 306 LR with a 306 drip tip will work and how to use on the battery? Is this all you need or do you need some other bit of kit? Call me over-cautious, but a good few of us won't use a Low Resistance atomizer on a Riva. If your LR atty is 1.8 it'll be fine. If it's really a "low" low resistance, that may not be sensible. I always have two 306 attys ready to use. LR and SR. The SR is just as good for flavour (well, 95%) and I only use LR on a Lavatube. If in doubt, just go with a SR. I reckon a 1.5-1.6 atty on a freshly charged Riva could be producing over 10 watts of "uncontrollable" power. or, put another way, if I put a 1.6 ohm atty on my Lavatube, there's not much chance I will go higher than 3.6,3.7, 3.8 (?) volts. If your Riva is charged and kicking out 4+ volts, you atty won't last long. Nor will your battery life.... That's what I love about this forum....I learn something new everyday thanks.
|
|
Rybes
Senior Member
Joined:December 2012
Posts: 354
Location:
Likes: 17
Recent Posts
Last Online Jun 25, 2013 16:51:33 GMT
|
Post by Rybes on Feb 2, 2013 20:31:25 GMT
Just that everyone seems to know what they're doing and I feel like a right pleb sometimes! if it makes ya eel better Tay, ive been vapin now for just over a year and when i joined this site all my knowledge i thought i aquired turned out to be tiny compared to whats out there. watch ya purse, this lot aint scared of temptin ya with shineys. itll start off with somthin small and before ya know it, youve spent ya wages lol
|
|
Tay
New Member
Joined:January 2013
Posts: 31
Location:
Recent Posts
Last Online Oct 31, 2014 10:45:25 GMT
|
Post by Tay on Feb 2, 2013 21:09:02 GMT
Thank you all. And thanks djs, I just checked and it says1.7-1.9ohms resistance, you think it will be ok? Or should I not risk it? Don't wanna knacker our batteries. Hi Rybes, I know what you mean, lol, finding it difficult to resist. Finding myself very curious about a twist now. Note to self.......Control is needed..... Apart from which, me and OH are going for this together, so anything I buy, he wants one. Double whammy! Not gonna be saving any money at this rate! Dunno know why I'm laughing, I thought we were gonna be quids in when we stopped the stinkies, but I'm already looking down the line at what I (we ) can upgrade to. Stop me someone!
|
|
Karma
Part Time Staff
Lorraine
No Longer a Vapefest Virgin
Joined:January 2012
Posts: 21,980
Location:
Likes: 7,589
Recent Posts
Last Online May 27, 2016 17:25:37 GMT
|
Post by Karma on Feb 2, 2013 21:13:30 GMT
|
|