Innokin Iclear 16 Dual Coil

[lenny59]

Hi

Anyone tried to rebuild on of these Clearomisers

Took one apart the other night and I'm not getting the light bulb moment on how to rebuild these

Am I asking too much to be able to rebuild a Dual coil head ?

They are without doubt the best Clearomisers I have tried. . . .Totally out perform the Kanger T3/MT3 in my opinion

[bomberharris]

I will also vouch for that ive done a review on these in the review section, im also very impressed with it , I have a spare head here that has a short in it, tomorrow im going to rewick it, looking at it I think im going to have to use some none res wire with the kanthel wire as it has along shaft on the head , i'll let you know how i get on . I have the innoken iclear30 and i beleive the head is just the same as your clearo.

[lenny59]

Feb 9, 2013 23:35:46 GMT bomberharris said:

I will also vouch for that ive done a review on these in the review section, im also very impressed with it , I have a spare head here that has a short in it, tomorrow im going to rewick it, looking at it I think im going to have to use some none res wire with the kanthel wire as it has along shaft on the head , i'll let you know how i get on . I have the innoken iclear30 and i beleive the head is just the same as your clearo.

I'd be very interested to see how you get on with the rebuild

I noticed they had 2 very thin sleeves of a plastic covering over the wire....about 7/8 mm

Yes The head looks exactly the same for both the 16 & 30

If the heads are rebuildable I'd be very tempted to get the 30

The vape on these is superb......puts an other clearomiser in the shade....Again only my opinion

[bomberharris]

Ive just taken the head apart and basicaly its the same as rewicking a vivi nova or ce5, but you will have to use none res wire along with kanthel wire to get the ohms right , at the bottom there is a long pin and one rubber gromit just the same as a vivi or ce5, when you take the old coil out you will see two small ruber sleeves , all they are doing is covering the joins of the none res wire and kanthel so just disgard them, And when youve rewicked the top coil with kanthel and put none res wire on the end of the legs be carefull when putting it in making sure the legs are not touching the bottom coil hope this helps . ive enjoyed wicking up this

[suede]

Got it apart--that was it.Couldn't get it right after that.Think i'll just buy the heads ready rolled.

[maccafan]

I got two brand new ones with the itaste kit which I keep looking at as gonna keep them as a reserve..

[lenny59]

Feb 10, 2013 18:51:26 GMT maccafan said:

I got two brand new ones with the itaste kit which I keep looking at as gonna keep them as a reserve..

Whats the kit like Macca ?

I like the look of what the battery can do........Puff counter included if I remember right

[maccafan]

I hardly use it and the MVP sits in my bag just in case the 4 tube mods I carry around fail.

Handy for charging other stuff in case you are too far away from a USB.

I did try it and it sits nicely in the hand. The button could do with being a little bit more tactile..Yes it's got a puff counter. It's ok I guess but I wouldn't buy one.

[truevape]

Anyone sorted this yet?

I have rebuilt it using AWG34 + NR wire, but it isn't firing. There something missing here. Even tried with only one wick.

[bomberharris]

Mar 8, 2013 20:13:22 GMT truevape said:

Anyone sorted this yet?

I have rebuilt it using AWG34 + NR wire, but it isn't firing. There something missing here. Even tried with only one wick.

are you sure you have not got a short, rewicked mine ok, but its very fiddly with the two coils and the long shaft .

[truevape]

Might be the way I'm connecting the NR to resistance wire. What method are you using? Hardest part for me is putting that plug back in

Mar 8, 2013 20:22:06 GMT bomberharris said:

Mar 8, 2013 20:13:22 GMT truevape said:

Anyone sorted this yet?

I have rebuilt it using AWG34 + NR wire, but it isn't firing. There something missing here. Even tried with only one wick.

are you sure you have not got a short, rewicked mine ok, but its very fiddly with the two coils and the long shaft .

[bomberharris]

Ive bought a bit of kit from here allaboute-cigarettes.proboards.com/thread/17463?page=6 it makes it alot more simple to join the wires together, im sure he'll make you one if you pm him, putting that plug in, just push it in, you can pull the wires tight again with ease with the plug in .