Iatty

[deesigner]

It's easy see www.e-cigarette-forum.com/forum/gg/199864-iatty-assembling-video.html

[ian]

Oh well,as Perpy said earlier its all good fun trying these new things out.Atleast i will have a few people to ask questions and share experiences with

[imeothanasis]

Ian, check this and tell me about the guy that said that Iatty is not an atomizer. Also please ask him the difference between atomizer and clearomizer lol

1.no soldering
2. ability to change the wick without changing wire
3. steel construction
4. change wire or wick without tools
5. put any size of resistance
6. no wool inside
7. it doesnt gets clogged
8. very easy to emply it if it gets overflooded
9. vapes in any angle
10. it cant be shorted in any way
11. dripping applicable, it doesnt stop working even if you put too many drops inside
12. you can put the exact resistance you want by premeassuring it outside Iatty
13. ability to adjust the feed according the liquid you use (thin or thick)
14. 5 ml capacity
15. no leaks
16. big smoke in low volts so we avoid a danger of liquid's pyrolysis
17. doesnt get hot, just warm
18. It makes almost no sound at all
19. easy refill
20. 50mm long, 21mm width
21. made in Europe
22. lifetime waranty by paying 12 euros for each part that fails even if it is user's fault.

[Lee]

You get 1m of wick, wire and no resistance wire Ian.

[Perpetua]

Evening Imeo.

Cam's had a busy couple of night's . . . I don't know of any atomiser that has a 5ml capacity either!

[imeothanasis]

Hi perp my dear. When we talk about atomizers we talk about something that is made for dripping? (Iatty can do this, clearomizer no), something that has wick and resistance like all atomizers? I think yes. So if we have a tube around atomizer to feed it then its not an atomizer any more? And what is the difference between atomizer and clearomizer? Only that the clearomizer has the resistance near the mouthpiece and atomizer near its connector. Thats it. So clearomizers are atomizers like Iatty is and like all the atomizers. Trying to separate the clearomizers from atomizers is a waste of time to my opinion:)

[ian]

Sorry Imeo,i didnt mean to offend.Ive just heard so much stuff today i didnt know what to beleive Ive ordered an i-atty as i do think it looks brilliant,i just hope i can get the coil making process done when it arrives.Atomiser itself looks very simple to construct.Edit to add,the new videos are very clear and helpful,i think i can manage it after watching very carefully :)So do you definately get 1m wick,resistance wire and non resistance wire in with the price of the i-atty?I managed to order 2m of resistance wire and wick but not non resistance wire as it said unavailable

[deesigner]

Morning Imeo, agree totally, they're all atomizers, just in different clothes

I'm looking forward to receiving my Iatty. I'm thinking it's going to save me a small fortune in disposable LR atties.

[imeothanasis]

Ian, I am sure that you will enjoy it as much as all the people that will buy it. If you will not be able to do it in the first time dont get dissapointed. Nice things need some try as you know

[imeothanasis]

Hi dee my friend. Not only we will save a ton of disposable atomizers but we will know what we vape and thats one more big advantage to my opinion:)

[highvoltage69]

So Lee have you got yours fired up yet ?

[Lee]

Still waiting.........

[deesigner]

Me too

[Cliffy]

After some trouble with the wires that were supplied...my fault I just couldn't get it lol.

Well I managed to wind together some lengths of no resis wire from off cuts and added what was left of the resis wire with the help of a magnifying glass lol ,and wound my first successful atty its wound to 2.8 Ohms and i`m vaping at 4.7 volts and wow!! its the best experience of vaping I have had in nearly 2 years of vaping.............Its a fantastic new add on for the GG range, and once I get more spares I will be making up several sets to keep in stock.

Also some info for those waiting on ther Iatty and have not seen Imeos latest suggestion`s see below.

www.wires.co.uk/acatalog/nc_bare.html 50g 0.16mm Nickel Chrome Wire
or if you want thinner wire you can buy 0,122mm ir 0,132mm

After too many experiments, the best vaping experience with Iatty is with a 1,5 ohm resistance to my opinion. The wick inside Iatty is fat so it can easily handle the liquid demand. And there is also the liquid control that can allow us to use different liquids (thin or fat) and to feed more or less the Iatty. You can still put a thinner wire (0.13 for example) to have more smoke or to be able to put bigger resistance (e.g. 2ohms)
For 6 volts I recommend 3ohm resistance

refillings methods if you have a burn taste:
open close the cap 4-5 times
open the liquid control more for a continous better taste or close it according to the needs of the liquid you use
dripping
Only on GGTS, close the CR and take 3-4 long inhales without pushing the button

I desided to send 2 different o-rings for the ceramic of the Iatty. You put the very small one first on ceramic and then the bigger one. I did this to make it easier to fit them inside ceramic.

If you overflood the Iatty just blow from its bottom and the liquid will come out of the mouthpiece

put all the resistance inside the ceramic otherwise you may damage the plastic under the ceramic

Make very tight threads and close each other

Buy 0,13mm wire for even better results

[Lee]

I won't be getting mine until next week now. Gutted it never came today.

From the little bits I've been reading it sounds as if the iAtty vapes as well as promised. I am guessing there will be a lot of experimenting with different resistances to get it spot on.

Anyone else receive their iAtty yet?