whats a good rebuildable atty

[robby]

I think they claim to have sorted that out mate, this is written on the site

"DareDevil from Vapersden has now modified all of about 40 genesis atomizers so that the airhole matches the wick, greatly improving draw and vapour production. See his comments below for a detailed explanation of what he has done and why.

DareDevil repeatedly refused any payment for doing this. His reason? He simply wanted anyone getting into genesis-style atomizers to get the best out of them from the start. He is a true enthusiast and great friend of vaping.

This genesis atomizer has been hand finished by an expert."

 Super-Shiny

[digicig]

The wick doesn't line up, there is a bit of a gap between the wick and centre pin - and the centre pin can ride up and lose connection with the mod

That being said - when tis running right tis a cracking vape - until it isn't

[Super-Shiny]

Thanks robby and digcig

[Super-Shiny]

robby

DID clone got delivered today and it looks like the hole don't line up, red dot is where it ends up when fully tightened:

That's with the top fully tightened (there is only about 2-3mm turn before it tightens up, there is quite a bit of thread but it only uses a small amount to tighten up)

[Roger]

Apr 12, 2013 14:15:18 GMT Super-Shiny said:

robby

DID clone got delivered today and it looks like the hole don't line up, red dot is where it ends up when fully tightened:

That's with the top fully tightened (there is only about 2-3mm turn before it tightens up, there is quite a bit of thread but it only uses a small amount to tighten up)

I just sanded the top down a bit, didn't take long, a little at a time.  Or try another 'O' ring.

[Super-Shiny]

@rogerah

Yeah i did have b & q at the back of my mind it looks like it's now at the front of my mind....what one out of this lot do you think would do the job nicely: search.diy.com/search#w=sandpaper&asug=

[robby]

Good advice from Roger there, looks like they were b/s ing on the website about having them sorted

[robby]

www.diy.com/nav/decor/decorating-supplies/abrasives/sand_paper/-specificproducttype-wet___dry_sandpaper/B-and-Q-Wet-and-Dry-Sandpaper-Pack-Of-4-Assorted-9254903?skuId=9262602

I think I would go for that one, do most of the work with a mediun and finish off with the fine

[Roger]

Yup, wet & dry is better for metal (and I use the term metal loosely).

[Super-Shiny]

Thanks, looks like b & q it is

[darthvaperz]

thanks everyone for your help and advice.my aga-s arrived yesterday and i love it, vapes really good and good flavour also gunna try some more of your recomendations.thanks again

[Super-Shiny]

robby

Sanded it down a little, it now lines up

Done a mesh today, kept getting hot spots so i oxidized the mesh more, hot spots went away and now it vapes like a dream, it really brings out the flavor in the juice, quite hard work though to get it right.

Gonna try a silica wick with it next

[robby]

Apr 13, 2013 18:18:36 GMT Super-Shiny said:

robby

Sanded it down a little, it now lines up

Done a mesh today, kept getting hot spots so i oxidized the mesh more, hot spots went away and now it vapes like a dream, it really brings out the flavor in the juice, quite hard work though to get it right.

Gonna try a silica wick with it next

Great, let us know what you think of the SS wick and Silica wick in comparison, I didnt notice that much difference really and it didnt seem enough of a difference to pursuade me to keep on with the SS wick

[Super-Shiny]

Apr 13, 2013 18:23:53 GMT robby said:

Apr 13, 2013 18:18:36 GMT Super-Shiny said:

robby

Sanded it down a little, it now lines up

Done a mesh today, kept getting hot spots so i oxidized the mesh more, hot spots went away and now it vapes like a dream, it really brings out the flavor in the juice, quite hard work though to get it right.

Gonna try a silica wick with it next

Great, let us know what you think of the SS wick and Silica wick in comparison, I didnt notice that much difference really and it didnt seem enough of a difference to pursuade me to keep on with the SS wick

Robby do you know of a good video showing how to do the silica wicking, the only one i found was this one:

[robby]

I would go with Todd`s mate, he know`s his stuff, no nonsense from him