Question with riva and ce4 clearo

[donov6]

Hi all me again haha! Very quick question, I have two clearos ATM (untill pay day) yes I'm that skint!!! One of them I emptied today, shook all the water off for a bit and dry burned it, filled it with a new juice (which I quickly decided I didn't like anyway)

And then started toking, it was making a strange slurping noise, then when I unscrewed it there was water/juice on the battery connector part, quickly cleaned it off, blew through the carto to get any water out, put it back on and it does the same thing?

I've just emptied it and will leave it over night, but as I was cleaning and shaking it it did seem like water was coming out the end that connects to the battery,

Would you say the carto is leaking? Or did I just not let it dry long enough, (other one works fine!) xxx

[djs]

What are you using?

[donov6]

Riva 1100 and a vision ce4 clearo x

[donov6]

Vision ego that is x

[djs]

Apr 13, 2013 18:58:11 GMT donov6 said:

Riva 1100 and a vision ce4 clearo x

Hmm. I knew you were going to say that.

I don't really know what you can and cannot get away with with a CE4. I doubt very much you can just rinse it out and get going again. Someone will know. (I gave up on these)

[donov6]

Ahh no worries mate, tbf the guide on here does say to leave it over night, but a video about dry burning made it sound like u could dry it after rinsing in the dry burning process, what clearo would u recvomend mate? X

[Super-Shiny]

Make sure the rubber bung near the drip tip is lined up and secure against the drip tip, and the drip tip tightly screwed on.

[donov6]

Would that affect water/juice getting on to the battery though romlee? Cheers for the reply x

[VE Jason]

You just need to leave it to dry properly donov6

Or, if you're handy with a hair dryer.....

[donov6]

Apr 13, 2013 19:24:21 GMT VE Jason said:

You just need to leave it to dry properly donov6

Or, if you're handy with a hair dryer.....

Thanks Jason

[Super-Shiny]

When you say "One of them I emptied today, shook all the water off " do you mean you cleaned it or do you mean water as in juice.

If you washed it out completely as per the video i would suggest leave it on a radiator overnight on top of tissue or the plastic tube will melt.

[donov6]

Sorry Romelee, I meant I washed it with water,

When I read ur beginner guide and watched the dry burning video, I got the impression you could just shake the water off as much as possible and then dry burn it whilst still slightly damp inside, got it on the side drying now and will try it in the morning

[Super-Shiny]

Apr 13, 2013 19:31:47 GMT donov6 said:

Sorry Romelee, I meant I washed it with water,

When I read ur beginner guide and watched the dry burning video, I got the impression you could just shake the water off as much as possible and then dry burn it whilst still slightly damp inside, got it on the side drying now and will try it in the morning

I have updated the Riva guide saying i aint in favor of the dry burning, i prefer the leave overnight method.

[donov6]

Ok cheers for the advice, and thanks for that guide too, helped me alot!!

[djs]

Apr 13, 2013 19:47:44 GMT Super-Shiny said:

I have updated the Riva guide saying i aint in favor of the dry burning, i prefer the leave overnight method.

yes, but you are into soaking in stuff though aren't you?

The only thing I don't dry burn is a 306 atomiser. That goes in vodka.

Standard atty head on standard rebuildable clearos always get a good burn. However, CE4 is not so easy.

I can turn around a V3/CE5 or Nova in 10 minutes.