Fasttech

[marlbororman]

any ideas how long before it drops through the door, if was dispatched 17-01-2014 ??? Not in a rush, but would be nice to take on hols in two weeks if it was ok

[DiscoDes]

Jan 19, 2014 12:13:58 GMT marlbororman said:

any ideas how long before it drops through the door, if was dispatched 17-01-2014 ??? Not in a rush, but would be nice to take on hols in two weeks if it was ok

marlbororman

Usually about 3 - 4 weeks if you chose the free post option or $1.

So you'd better re-think your holiday plans!

[marlbororman]

lol will take my tank and aga t3 then that was the plan anyway

[X&Y]

Jan 10, 2014 22:31:25 GMT X&Y said:

Jan 9, 2014 0:56:05 GMT X&Y said:

My apologies for putting a downer on it

FT were great to begin with and then as an earlier post mentioned it's slipped a bit.

This is the first time I've tried the EU posting options and it's not really doing it for me.

As I said in an earlier post was happy to wait for the lot, because it contained a Kayfun clone, which showed as shipping in ten days.

Then I got the emails from FT saying they posted separately to avoid delays.

To date, nothing has arrived and now I'm pe*d off as I can't get any update on the tracking site or a response from FT.

Some of the bits I really could do with now.

Wish the tracking software was a bit more reliable. That's all really.

Well the tracking software finally updated on one package and it arrived today

Guess which one

Yes the one with the Kayfun in that was responsible for holding everything up and was sent afterwards

No sign of the other one or any update on the tracking.

The tracking software has finally updated on the second package (the first one sent) and shows as being in Essex.

Maybe tomorrow then

Just 55 days then

[ionian]

I ordered some items on 6 Jan, including a couple of 3.1 clones that were 10 days to ship. I've seen this before, and the item was dispatched within the 10 days so I didn't mind the wait. The scheduled ship day has passed, and now the item is listed as restocking on my order details with no ship date.

Has this happened to others, is it likely to be restocked or am I going to be disappointed?

I know it will be an almighty wait anyway with the new year holiday!

[Karma]

Jan 22, 2014 17:22:04 GMT ionian said:

I ordered some items on 6 Jan, including a couple of 3.1 clones that were 10 days to ship. I've seen this before, and the item was dispatched within the 10 days so I didn't mind the wait. The scheduled ship day has passed, and now the item is listed as restocking on my order details with no ship date.

Has this happened to others, is it likely to be restocked or am I going to be disappointed?

I know it will be an almighty wait anyway with the new year holiday!

Personally, I would cancel and re-order.

 If there is a problem with your order you are already 16 days into the 45 days you have to open a PP dispute, so if the item doesn't ship until after their holiday it will not leave much time if there is a problem with delivery or the goods 

[ionian]

Thanks Karma - I guess that's sensible. Do they do a full refund for cancelled orders, or just credit for future purchases?

[Gary Horder]

Full card refund or shop credit

[stu1873]

I am looking at getting a cloned Kato Hammer from fasttech but there are three different variants available. One chromed brass, one stainless steel with a stainless steel tube inside and one stainless steel with a brass tube and extension tubes that i won't be using as i like my mech mods to be in 18350 mode.

The chromed brass one is out of the equation so it's down to the two stainless versions. The one without the extension tubes has the stainless tube inside to conduct the power to the top cap. Will it be alot worse than a brass tube or would they be around the same?

Has anyone recieved a cloned Hammer yet?

[alansi]

This two guys and don't like it!

[richo71]

Jan 24, 2014 18:31:51 GMT stu1873 said:

I am looking at getting a cloned Kato Hammer from fasttech but there are three different variants available. One chromed brass, one stainless steel with a stainless steel tube inside and one stainless steel with a brass tube and extension tubes that i won't be using as i like my mech mods to be in 18350 mode.

The chromed brass one is out of the equation so it's down to the two stainless versions. The one without the extension tubes has the stainless tube inside to conduct the power to the top cap. Will it be alot worse than a brass tube or would they be around the same?

Has anyone recieved a cloned Hammer yet?

I wouldn't bother stu due to Problems with the spring loaded center pin in the top cap, its causing serious voltage drop!

[stu1873]

Jan 26, 2014 3:02:11 GMT richo71 said:

Jan 24, 2014 18:31:51 GMT stu1873 said:

I am looking at getting a cloned Kato Hammer from fasttech but there are three different variants available. One chromed brass, one stainless steel with a stainless steel tube inside and one stainless steel with a brass tube and extension tubes that i won't be using as i like my mech mods to be in 18350 mode.

The chromed brass one is out of the equation so it's down to the two stainless versions. The one without the extension tubes has the stainless tube inside to conduct the power to the top cap. Will it be alot worse than a brass tube or would they be around the same?

Has anyone recieved a cloned Hammer yet?

I wouldn't bother stu due to Problems with the spring loaded center pin in the top cap, its causing serious voltage drop!

Can the spring not be changed for a better one though, or change the top cap altogether with a similar sized mod?

Edit
Just watched the vid above and i think i will give it a miss. Seen another vid and the dude used the King clones top and bottom cap but that would be another £15 with the chance it didn't work.

[marlbororman]

Jan 19, 2014 12:31:49 GMT DiscoDes said:

Jan 19, 2014 12:13:58 GMT marlbororman said:

any ideas how long before it drops through the door, if was dispatched 17-01-2014 ??? Not in a rush, but would be nice to take on hols in two weeks if it was ok

marlbororman

Usually about 3 - 4 weeks if you chose the free post option or $1.

So you'd better re-think your holiday plans!


Damm and Blast................. Posty just been and i missed him. Saw him driving away in the van. Gotta be the Kayfun, thats only thing im waiting on Oh well, i`ll go hound the sorting office at 6am in the morning lol. Hopefully its ok, and can take on my jolly`s

[DiscoDes]

Jan 28, 2014 10:43:54 GMT marlbororman said:

Jan 19, 2014 12:31:49 GMT DiscoDes said:

marlbororman

Usually about 3 - 4 weeks if you chose the free post option or $1.

So you'd better re-think your holiday plans!


Damm and Blast................. Posty just been and i missed him. Saw him driving away in the van. Gotta be the Kayfun, thats only thing im waiting on Oh well, i`ll go hound the sorting office at 6am in the morning lol. Hopefully its ok, and can take on my jolly`s

[marlbororman]