Need some help with my SS dream

[Deleted]

Just not vaping. Checked the bottom coil...that's fine. Tried a rewick...didn't make any difference...

Any ideas most appreciated. Is that bottom coil supposed to come easily off the base or supposed to be stuck there like glue? I have no idea...

thanks

Was working fine the other day though the draw is a bit airey (as others have said)

[Ron]

The coil is held with the little pins sorry if I have misunderstood

[archiecat]

Apr 29, 2013 14:30:44 GMT @johanino said:

Just not vaping. Checked the bottom coil...that's fine. Tried a rewick...didn't make any difference...

Any ideas most appreciated. Is that bottom coil supposed to come easily off the base or supposed to be stuck there like glue? I have no idea...

thanks

Was working fine the other day though the draw is a bit airey (as others have said)

Not exactly sure what you mean! the following link has a lot of info on the dream, hope it works!

Dream

Only thing is that the first few pages are about the chrome plated version, but the both work the same way.

[izan]

What does the resistance read after coiling? Are you using the wick/coil that came with it?

Good luck
I

[Deleted]

Don't know what it reads...don't have a multimeter. Tried inverting the bottom spring in the base (not the coil. The coil is held in with wee pins. 4 coils round a wick)...using it on a drawtube...just not vaping

Don't know what could be wrong with it

Any help most appreciated

[izan]

Turn the little spring around.
It should be a funnel, narrow end down.
I toasted the spring on one of mine and replaced it with a 1cm tall 5mm brass tube. Works a treat.


Good luck
have fun
Buy a multimeter

I

[Deleted]

Yeah it is...still not connection...

linky for your brass tube please

Many thanks

Jane

[izan]

I used a CE2 510 base. Find large rubber/silicon insulator. Press insulator into base of 510, the bottom rim of the 510 will be your contact point.
pop it on the pin in the base of the BT804 and vape on.
VERY IMPORTANTS!!!!! Confirm that your new center post WILL NOT short to an edge (slide around and touch the metal on the side), the rubber bung keeps everything nice and snug.


Good luck
Have fun
I

Buy Multimeter...

[maccafan]

Have you made sure the center post on the drawtube is wound up to make contact with the atty?

When switching attys on the drawtube, always remove the cap and unscrew the center post. Then tighten down your atty and the wind up the center post till it makes contact and then screw the whole arrangement onto the telescopic portion..

[Deleted]

Thanks guys..I emailed charlie and he suggested a few vids...I'm on the last of my contact pins but still. I got it working thanks to todd's fix on charlie's site using 4 pieces of 1mm wick....

Yay....am one happy girlie...Just spent the best part of two hours trying to fix that. LOL

Vaping away happily...think I need to get dinner now LOL

[jeffc]

Hi All.

This might answer your questions and resolve your problems.

www.toddsreviews.com/2013/04/hints-tips-for-ss-dream.html?utm_source=feedburner&utm_medium=email&utm_campaign=Feed%3A+ToddsEcigReviewsTutorials+%28Todds+Ecig+Reviews+%26amp%3B+Tutorials%29

jeffc

[Todd]

Glad it helped guys