Recommendations for a decent silica wick rebuildable?

[kirrielad]

As the title says looking for a good rebuildable. Purchased the extended dream and loving it and looking to add something else to the collection. I'm after something with a decent size tank if possible. All suggestions and links welcome. Cheers

[mhyquel]

I'm really enjoying the nautilus. Go for an extended. Lovely, though a little bit of a rebuild bastard.

[Mev]

+1 Nautilus..

[kirrielad]

This one?

www.vapor-freak.de/zubehoer/Nautilus-V2-SW/Nautilus-V2

[Mev]

Yes that's the one, you can get clear tanks for them too and extensions if you want.

[Perpetua]

Another vote for the Nautilus . . . especially now there's the V2 innards, like the Odysseus it makes it a lot easier for re-building.

Do get a clear tank Kirrie if you get one, it makes refilling much simpler.

Excellent service from Vapor Freak as well, when I've ordered from them delivery has been within the week.

[kirrielad]

Do you need to use non-resistance wire on them?

[Adam78]

what's the difference between that 49 euro one and this one for £28?

charliesvapeshop.co.uk/index.php?route=product/product&path=75&product_id=135

[Deleted]

May 4, 2013 22:55:25 GMT Adam78 said:

what's the difference between that 49 euro one and this one for £28?

charliesvapeshop.co.uk/index.php?route=product/product&path=75&product_id=135

That cheap one is a very, very poor attempt of a copy. Avoid!

[Deleted]

May 4, 2013 22:54:30 GMT kirrielad said:

Do you need to use non-resistance wire on them?

Yep.

[kirrielad]

Cheers @simate. Does that mean its a bit of a pain in the rear? I like the simpleness of the dream, might just pick up another one of them unless there's any other suggestions? I know the kayfun is hard to get a hold of but do they need the non-res wire aswell?

[blakey]

If you really want to go top end on a silica rebuildabes then Kayfun 3.1 or Ithaka- both outstanding atties in their own right

The nautilus is a very very good attie too but if you're not going to be happy joining wires then avoid and avoid Ithaka too cos you have a lot more joining to do but tbh, joining wires is a breeze and you only have to do it once a week

[blakey]

May 4, 2013 23:14:09 GMT kirrielad said:

Cheers @simate. Does that mean its a bit of a pain in the rear? I like the simpleness of the dream, might just pick up another one of them unless there's any other suggestions? I know the kayfun is hard to get a hold of but do they need the non-res wire aswell?

The dream is a clone of the kayfun- you wire it up the same

[Deleted]

May 4, 2013 23:14:09 GMT kirrielad said:

Cheers @simate. Does that mean its a bit of a pain in the rear? I like the simpleness of the dream, might just pick up another one of them unless there's any other suggestions? I know the kayfun is hard to get a hold of but do they need the non-res wire aswell?

The Kayfun is easy to setup, you don't need no res wire for those.

Here's a pic of the base of a Kayfun.



Have you considered a Spheroid?

[kirrielad]

Thanks blakey might ruin the bank and try and pick one up from cv9 on Monday then if buy any chance they haven't already sold out. Anywhere other vendors that stock them?