Do these work well

[Super-Shiny]

With just silica wick? and do they leak?

Don't wanna use mesh.

www.vapingthings.com/AGA-S_REBUILDABLE_ATOMISER/p1311952_8376315.aspx

[Deleted]

jeffc has his working with silica ...

www.vapegear.co.uk/product/aga-s

they don't leak and are pretty awesome with mesh

[Roscopecotrain]

I have mine working with silica. Followed maccafan guide to silica wick in a aga t in tips and tricks and just applied it to the aga s using 2ml wick.

Sent from my Galaxy Note 2

[jeffc]

Hi Rom.

Yes the AGA-S works really well with `ekowool` silica wick.(ecig wizard, cloud 9, have in stock).

I use 2 x 1mm silica strands, coiled at 1.8/2.0 ohms.

Fed into wick hole and 2nd hole where the plastic bung was.(could use 1 strand 2mm dia wick, but I did not have any).

Flame the silica wick and wire (essential).

Really good vape.

Only gripe the `O` ring to hold top cap need packing out, I put cotton under the rings ,now good fit.

I am pleasantly surprised with its performance, strongly recommended.

Hope this helps.

jeffc

[Super-Shiny]

Thanks @ashmal , Roscopecotrain , jeffc

Might just order one tomorrow, will have a sleep on it

[Perpetua]

Have you tried a Nautilus, Terminator or Euforia Rom . . . the GG look alikes, they're excellent if you like a silica wick set up. 

[dave]

I think you should stick to plan A Rom and carry on saving up for a Kayfun

[Super-Shiny]

May 16, 2013 21:25:24 GMT Perpetua said:

Have you tried a Nautilus, Terminator or Euforia Rom . . . the GG look alikes, they're excellent if you like a silica wick set up. 

Found the Nautilus : charliesvapeshop.co.uk/index.php?route=product/product&path=75&product_id=135   Don't know what version it is if that matters?

Cannot find the Terminator?

[denis9t9]

Just as a matter of interest could you use silica on a DID?

[Perpetua]

May 17, 2013 7:30:27 GMT Super-Shiny said:

May 16, 2013 21:25:24 GMT Perpetua said:

Have you tried a Nautilus, Terminator or Euforia Rom . . . the GG look alikes, they're excellent if you like a silica wick set up. 

Found the Nautilus : charliesvapeshop.co.uk/index.php?route=product/product&path=75&product_id=135   Don't know what version it is if that matters?

Cannot find the Terminator?

Not that one Rom that's a Chinese copy of a copy, the ones from Vapor Freak . . . they're as close to the GG originals that you'll ever get, if not the same without the branding.

If you use Chrome it will auto translate the page for you, it's the last tab right on the drop down:

www.vapor-freak.de/

Terminator from Stormy:

stormysvaporcellar.com/oc_1/index.php?route=product/category&path=101

[Moggy]

Super-Shiny Just want to point out for you, the Terminator and Nautilus both take their airfeed from the 510 thread like a Nova, and have a "slight" raised platform on the base. It WILL give you a gap, which is what made me decide against them.

Everyone I have spoken to say they perform well, and I have REALLY researched this type before committing to a big spend. Todd has compared them to their peers (ie Penny, Oddy, and Ithaka) in his reviews, and I got the impression he didn't think they were bad in any way. "almost the same" if I remember rightly.

blakey pointed out a few tips/tricks to me the other day for a good negative wire connection, IF you decide to go with one.

Personally, I have decided on Ithaka or Kayfun...Ithaka preorder closes next wednesday (22/5/13) at esmokeguru, Kayfun 3.1 I am on the subscription list for when back in stock at Cloud9.

Kayfun comes with the adaptor for using your own driptips, Ithaka you need a different mouthpiece. Blakey showed me how the driptip spins in the mouthpiece when using the juice control due to the o-ring seal.
Kayfun is all metal construction in the chamber, Ithaka obviously has ceramic. They are only 1.5euros tho.

Sounds like you are in the same "decision making mode" as me, drop me a PM with phone number and we can convince each other to spend a fortune

[blakey]

The terminator/nautilus is a cracking attie but it has a step built in to the base to keep it raised for airflow so it isn't going to sit flush on anything. If that doesn't bother you then that is a great cheaper option. I have 3 of them here now and the only reason they aren't being used is because I have 4 Kayfuns, 2 Odysseus, 2 penelopes and an ithaka. I should put them on the classies but for some reason I start to tremble at the thought of parting with vaping things

[Super-Shiny]

Well it looks like it all flopped for me again, Postie came today and i noticed some red writing through the see through window on one of the letters and thought "Oh no what is this" opened it up to find out it was a final reminder for my eldest son's phone bill he promised he payed over two months ago

So i come to a deal with my son and said i will pay it off in full (£135.00) on two conditions, one it never happens again and second he pays me back monthly.

I did tell him there is two very important things in life to remember:

1) Education
2) Good credit rating

And loads of other things you tell your kids

So that's my spending spree thrown out the window and won't be able to get anything expensive until after my holiday as i am also saving for that aswell.

But after my hols im not gonna get the Kayfun as i decided i want something that will look good on my twists and eVic so am gonna choose between these two:

Spheriod
Penelope

[Moggy]

The last lot of spheroids that landed at vapourart went in a hour this morning, you HAVE to be quick.

[jeffc]

Hi Rom.

Kids, don`t you just love them. You like me "THE BANK OF DAD", when they are in financial need.

Your selection for delayed purchase are `top notch`.

I have never used a Penelope, so cannot comment, but have read good reviews on them.

The Spheroid is a fantastic piece of kit, once set up correctly, delivers unbelievable full flavour, along with vapour and

throat hit. Especially if you like fruit /dessert flavoured juices.

This extra delay will be soon forgotten when you are happily vaping on your new atty.

Happy Days ahead to look forward too.

jeffc