Help! My computer won't recognise my Evic

[OneDay]

And if I click 'run as' I get this

[Greigster]

Not a very good vid but I get this when I right click the desktop icon.

[Roscopecotrain]

I take it you have installed it oneday or is this to install it?

Sent from my Galaxy Note 2

[OneDay]

Thanks Greigster. I can open the MVR, it's the usb connection between the device and the pc that's not being recognised

[OneDay]

May 17, 2013 10:54:22 GMT Roscopecotrain said:

I take it you have installed it oneday or is this to install it?

Sent from my Galaxy Note 2

The software is installed Rosco, but the pc itself won't recognise the usb connection from the device

[Roscopecotrain]

Got to be the lead then oneday. You have another one you can try.

Sent from my Galaxy Note 2

[DiscoDes]

May 17, 2013 11:00:20 GMT Roscopecotrain said:

Got to be the lead then oneday. You have another one you can try.

Sent from my Galaxy Note 2

Yes, my conclusion too, try another lead.

Good luck!

[Greigster]

I had exactly this problem but it was solved by running as administrator.
Sorry oneday, dont know what else to suggest other than trying another micro USB lead. My Samsung Galaxy lead works, do you have another lead?

[fred]

OneDay

2 (well, kinda 3) suggestions in order:

• Although the software is installed, it looks like it could be a driver issue.
  
• Untick that box about protection & try
  
• Click the 'following user' radio button and use user Administrator (you do have one - password is probably blank)

What version of Windows are you using? Is the software 100% compatible? My money is on the driver, rather than the lead.

[rincewind]

sounds daft but i had this issue. First turn off the evic and disconnect the lead. plug the lead in to another usb port. run MVR and then connect the evic and see what happens. I guess you are running windows XP from the screen shot.

[vapemonkey1980]

I got mine yesterday and had similar gip.

Bought mine second hand so was already running 1.3

First download I did was MVR 1.0

Poor start

Downloaded the relevant one. Still had the hump.

It doesn't seem to like the device being plugged in when you first run MVR

Just for giggles, try unplugging the evic, running MVR then plugging it back in.

Worked for me


Or to put it another way..... What Rincewind said

[Mev]

are you using XP ?

when you right click select properties, run as admin should be in there. Can't remember exactly what the options are as it's been sometime since using XP.

[OneDay]

I'm running XP
There is NO 'run as admin' option
I've tried 3 different leads
I've tried plugging it in with MVR closed and MVR open

Every time this comes up:



It then goes off searching for the driver then comes up with

[Greigster]

Sorry oneday, probably stating the obvious but can you un-install the software and re-download/re-install just in case you have a corrupted one during your first try?

[Moggy]

What service pack of windows xp are you running ? You may be missing some USB2.0 drivers.

If I remember rightly, its START BUTTON >> Control Panel >> System