Ftao chrisjw

[Neil from Valley Vapes]

chrisjw Have a look at this matey this is what got me thinking with the nauti and the oddy. www.e-cigarette-forum.com/forum/rebuildable-atomizer-systems/358343-terminator-nautilus-choddy-oddy-clone-pics-tip-tricks-quirks-5.html

[chrisjw]

Jun 6, 2013 14:53:41 GMT Neil from Valley Vapes said:

chrisjw Have a look at this matey this is what got me thinking with the nauti and the oddy. www.e-cigarette-forum.com/forum/rebuildable-atomizer-systems/358343-terminator-nautilus-choddy-oddy-clone-pics-tip-tricks-quirks-5.html

Looks a bit different to my one Neil..........

www.ivapour-elixir.co.uk/parts/rebuildable-atomisers/aga-t2-atomizer-1.html

[chrisjw]

I think macca told me that they weren't interchangeable.....or was it blakey?..............can't remember.senility kicking in.............

[Neil from Valley Vapes]

Oh bloody hell im confused now lol. Why do they have to use so many different names for the same damn thing rofl. Tjis is the one I have got
www.vaporbreak.com/en/home/219-odysseus-rebuildable-atomizerodysseus-short-modc-cov.html

[Neil from Valley Vapes]

Another question how do you set yours up? Havent used mine yet still using the dripper and aga-t.

[chrisjw]

Jun 6, 2013 15:08:06 GMT Neil from Valley Vapes said:

Another question how do you set yours up? Havent used mine yet still using the dripper and aga-t.

If yours has the 2 channels, I use a short length of non-res wire for the coil part, then 2 lengths of res for the legs....wrap 5 coils, push the coil legs down the channels & cover with the wick legs...Wrap one leg around the bottom post & tighten it up.........Then I trap the other coil leg under the knurled nut........Trim the wick legs first.

[Neil from Valley Vapes]

yep 2 channels on mine. so you dont use res for the coil just the legs so it actually heats the legs of the wick not the bit across the airflow? or have I read that wrong (probably have lol)

[Andy Thatcher]

Getting the Terminator or Euphoria this weekend so...keep that info coming please !

[chrisjw]

Jun 6, 2013 15:20:45 GMT Neil from Valley Vapes said:

yep 2 channels on mine. so you dont use res for the coil just the legs so it actually heats the legs of the wick not the bit across the airflow? or have I read that wrong (probably have lol)

The idea of the non-res, is just to extend the legs from the coil......If the res wire has a long distance to travel, it affects the ohms.............Then again, I may have just made all that up, but I think it's right........

[Andy Thatcher]

Jun 6, 2013 15:31:15 GMT chrisjw said:

Jun 6, 2013 15:20:45 GMT Neil from Valley Vapes said:

yep 2 channels on mine. so you dont use res for the coil just the legs so it actually heats the legs of the wick not the bit across the airflow? or have I read that wrong (probably have lol)

The idea of the non-res, is just to extend the legs from the coil......If the res wire has a long distance to travel, it affects the ohms.............Then again, I may have just made all that up, but I think it's right........

Perfectly correct.

Otherwise with any of the atty's that use a ceramic cup, ceramic seems to be my word of the day, you will near enough immediately be in the 2.5 range using .20.

[fiddles]

Jun 6, 2013 15:20:45 GMT Neil from Valley Vapes said:

yep 2 channels on mine. so you dont use res for the coil just the legs so it actually heats the legs of the wick not the bit across the airflow? or have I read that wrong (probably have lol)

Chrisjw got it wrong Neil from Valley Vapes
no res for legs and res for coil if not you are right the legs would heat but the coil wouldnt

[Neil from Valley Vapes]

Jun 6, 2013 15:58:57 GMT fiddles said:

Jun 6, 2013 15:20:45 GMT Neil from Valley Vapes said:

yep 2 channels on mine. so you dont use res for the coil just the legs so it actually heats the legs of the wick not the bit across the airflow? or have I read that wrong (probably have lol)

Chrisjw got it wrong Neil from Valley Vapes
no res for legs and res for coil if not you are right the legs would heat but the coil wouldnt

Thats why i wondered lol.

[Perpetua]

Jun 6, 2013 15:06:47 GMT Neil from Valley Vapes said:

Oh bloody hell im confused now lol. Why do they have to use so many different names for the same damn thing rofl. Tjis is the one I have got
www.vaporbreak.com/en/home/219-odysseus-rebuildable-atomizerodysseus-short-modc-cov.html

The Nautilus and Terminator C aren't the same thing Neil as the Nauti from UK Vendors and VB . . . it's a clone of a clone.

So the parts are absolutely not compatible with the spares you can buy from Team Rampage, Stormy or Vapor Freak.

[chrisjw]

Jun 6, 2013 15:58:57 GMT fiddles said:

Jun 6, 2013 15:20:45 GMT Neil from Valley Vapes said:

yep 2 channels on mine. so you dont use res for the coil just the legs so it actually heats the legs of the wick not the bit across the airflow? or have I read that wrong (probably have lol)

Chrisjw got it wrong Neil from Valley Vapes
no res for legs and res for coil if not you are right the legs would heat but the coil wouldnt

That's what I put fiddles...........or at least I think I did.............

I stand corrected fiddles.....I typed it the wrong way round.....Must be 'cos I'm left handed..........

[maccafan]

Nautilus from Vaporfreak, Germany and Terminator from Stormy Vapor Cellar USA are the same mod, made by a manufacturer who wishes to remain anonymous, and 90% compatible with the original Odysseus from GG.

The Nauti is from China by a company called Tobeco and has some flaws but works k according to those who have used it..

So in terms of absolute quality in order of decreasing quality:

1. Odysseus from GG. The V2 of the Ody improves upon the mod by allowing it to sit flush with flat topped mods and has a redesigned ceramic holder and ceramic allowing for easier grounding.

2. Nautilus/Terminator. Similar to V1 Ody. There is a V2 Nautilus but only the ceramic holder design has been copied from Ody V2.

3. Nauti from Tobeco, China.