gapy360
Super Member
Joined:April 2013
Posts: 618
Location:
Likes: 328
Recent Posts
Last Online May 10, 2016 15:15:38 GMT
|
Post by gapy360 on Sept 10, 2013 10:15:17 GMT
Ok, so time for some advice please, I gave this a go at the weekend and initially when I checked it on my Vamo it came out to 1.6ohms then when I test fired it it dropped to 1ohm which was too low for the Vamo to fire. This was both dry and with eliquid on. I figured I needed to test fire it to ensure I had good glow on the coils. I noticed the kanthal glow up the positive leg and it dropped almost as it reached the SS mesh
|
|
Ancient Hermit
Senior Member
Mixprentice
Joined:June 2013
Posts: 257
Location:
Likes: 82
Recent Posts
Last Online Jun 30, 2013 13:09:38 GMT
|
Post by Ancient Hermit on Sept 10, 2013 20:13:48 GMT
Ok, so time for some advice please, I gave this a go at the weekend and initially when I checked it on my Vamo it came out to 1.6ohms then when I test fired it it dropped to 1ohm which was too low for the Vamo to fire. This was both dry and with eliquid on. I figured I needed to test fire it to ensure I had good glow on the coils. I noticed the kanthal glow up the positive leg and it dropped almost as it reached the SS mesh I think that is what is known as having a hot spot. Try some of Todd's videos on you tube, he doesn't quite explain it all, but he covers a lot of it. Hope it helps. ok, he's not working with protanks, but it does cover some of the carry on with coils. Hopefully someone else will know a lot more and rescue us both soon!
|
|
gapy360
Super Member
Joined:April 2013
Posts: 618
Location:
Likes: 328
Recent Posts
Last Online May 10, 2016 15:15:38 GMT
|
Post by gapy360 on Sept 10, 2013 21:44:48 GMT
Ok, so time for some advice please, I gave this a go at the weekend and initially when I checked it on my Vamo it came out to 1.6ohms then when I test fired it it dropped to 1ohm which was too low for the Vamo to fire. This was both dry and with eliquid on. I figured I needed to test fire it to ensure I had good glow on the coils. I noticed the kanthal glow up the positive leg and it dropped almost as it reached the SS mesh I think that is what is known as having a hot spot. Try some of Todd's videos on you tube, he doesn't quite explain it all, but he covers a lot of it. Hope it helps. ok, he's not working with protanks, but it does cover some of the carry on with coils. Hopefully someone else will know a lot more and rescue us both soon! Thanks mate will try some and see if that helps
|
|