Free repairs and recycling.

[raid2506]

Sept 9, 2013 17:28:06 GMT beautycat said:

I have quite a few batteries, I'm not sure if they are repairable or not though, if not you are more than welcome to them for parts , for some reason, I haven't thrown them away, how about leaky clearo, I have quite a few of them you're welcome to too

It's all good, I can often fit a replacement battery to a good case or a switch to a good battery etc.

Also grateful for any cartos, clearos etc.

I can usually get at least 1 O ring, a positive pin and a grommet from a leaky clearo if nothing else.

PM sent

[raid2506]

Sept 9, 2013 18:36:49 GMT imogensmummy said:

Raid, could you pm me your address? I'd like to send you an egoC twist to have a look at if you get the time please x

Sent from somewhere. I'm probably procrastinating again!!!

PM sent

[Balllsy]

My Mrs isn't working, can you fix her ?

[raid2506]

Sept 9, 2013 19:16:58 GMT deesigner said:

I might have to call on your skills, my ex has resoldered my eVic head wires, it comes on now, great until I put a atty on it then it just dies! Ive still got to have a search through my drawer of odd bits for you found one carto so far

No probs, sounds like a head short. I'll heat shrink the connector and replace the grommet.



One carto is better than no cartos, feel free to chuck it in.

PM sent

[raid2506]

Sept 9, 2013 21:50:14 GMT Balllsy said:

My Mrs isn't working, can you fix her ?

No promises mate, have you got any pics that aren't already on her website?

[Balllsy]

None that would be of any help mate, trust me

[zeldamum]

My SVD fire button is stuck on, any suggestions before I contract Fasttech it is still covered by their guarantee.

Thank you Raid,

[raid2506]

Sept 10, 2013 6:12:32 GMT zeldamum said:

My SVD fire button is stuck on, any suggestions before I contract Fasttech it is still covered by their guarantee.

Thank you Raid,

It's real easy to void a warranty so I would avoid doing anything too invasive.

If the button is stuck in the down position it's usually something behind or around the button sticking it there (juice etc) or a burr on the button/hole.

If the button is in the up position or rattling around it's most likely a damaged momentary switch on the circuit board.

Having said all that if the button is clicking like it should and stops and starts when you remove and replace the battery it could be a manufacturing fault on the circuit board.

Many mods use an open momentary switch behind the fire button. A juice spillage can get in there and stick the switch in the fire position.

If it was an eGo I would say turn it off and give it a swim in alcohol, let it dry and away you go.

As your SVD is pretty new and you have the option to send it back I wouldn't go any further than cleaning around the button with alcohol.

[zeldamum]

Sept 10, 2013 8:36:05 GMT raid2506 said:

Sept 10, 2013 6:12:32 GMT zeldamum said:

My SVD fire button is stuck on, any suggestions before I contract Fasttech it is still covered by their guarantee.

Thank you Raid,

It's real easy to void a warranty so I would avoid doing anything too invasive.

If the button is stuck in the down position it's usually something behind or around the button sticking it there (juice etc) or a burr on the button/hole.

If the button is in the up position or rattling around it's most likely a damaged momentary switch on the circuit board.

Having said all that if the button is clicking like it should and stops and starts when you remove and replace the battery it could be a manufacturing fault on the circuit board.

Many mods use an open momentary switch behind the fire button. A juice spillage can get in there and stick the switch in the fire position.

If it was an eGo I would say turn it off and give it a swim in alcohol, let it dry and away you go.

As your SVD is pretty new and you have the option to send it back I wouldn't go any further than cleaning around the button with alcohol.

Thank you Raid I will try that later. Then get hold of Fasttech if it doesn't work.

[andy01424]

Sept 9, 2013 14:55:26 GMT ChillerVapes said:

God damn it! I just threw away my vamo (in bits) still worked but no longer had a lcd screen!

Really wish instead of giving up looking for a replacement lcd to fix it myself I just sent it to you now!

for few bob more it would be cheaper to get another vam! www.stealthvape.co.uk/electronic-cigarette-mod-parts/vamo-pcb-circuit-board
Raid2506 this vendor has spares if you need them

[raid2506]

Sept 10, 2013 9:20:09 GMT andy01424 said:

Sept 9, 2013 14:55:26 GMT ChillerVapes said:

God damn it! I just threw away my vamo (in bits) still worked but no longer had a lcd screen!

Really wish instead of giving up looking for a replacement lcd to fix it myself I just sent it to you now!

for few bob more it would be cheaper to get another vam! www.stealthvape.co.uk/electronic-cigarette-mod-parts/vamo-pcb-circuit-board
Raid2506 this vendor has spares if you need them

Yeah that's cool andy01424, just buy a random selection and send them to me

[spikus]

Raid ... I have a dodgy Ego twist and a completely shagged 1100 ego . If you could fix the twist that would be cool... I have a few cartos that are surplus to requirements also ... If you could pm me your address I'll wing them to you ...

Many many thanks !

[raid2506]

Sept 10, 2013 12:08:00 GMT spikus said:

Raid ... I have a dodgy Ego twist and a completely shagged 1100 ego . If you could fix the twist that would be cool... I have a few cartos that are surplus to requirements also ... If you could pm me your address I'll wing them to you ...

Many many thanks !

PM sent
Thanks.

[Chrissie]

raid2506 I've got 30 cartomisers & a dead Riva battery (or 2) that you can have.

I've also got a Vamo with what I think has a worn grommet that I would be so happy if you could fix it for me?

[raid2506]

Sept 11, 2013 10:07:06 GMT Chrissie said:

raid2506 I've got 30 cartomisers & a dead Riva battery (or 2) that you can have.

I've also got a Vamo with what I think has a worn grommet that I would be so happy if you could fix it for me?

Thank you Chrissie.

PM sent