Evod replacement heads

[Phoenix .]

Why or why are these heads not stamped with the ohm's.?

After cleaning these in a bowl of soapy water, I forget which ohm they are and that results in frustrating vaping, I use ego Twists, vision Spinner batts. I get hardly any vapour , button gets hot even on 3.2.

Thing is , when I buy new heads I pop them all in a bag(unlabelled) consequently I don't know what ohm's I am using, I buy 1,8 and 2.5.

Anyone else had this problem?

[raid2506]

I can't say I have as I throw all mine in together and enjoy the lucky dip.if it fit's I use it

I would advise that you separate them upon delivery and keep them that way.

Not heard of anybody cleaning heads in a bowl of soapy water though, that must taste interesting?

[Super-Shiny]

New purchased heads in the future:

Bag 1 labeled Bowl 1.8
Small bowl labeled 1.8

Bag 2 labeled Bowl 2.5
Small bowl labeled 2.5

Sorted

[dragon]

Super-Shiny

The less organised solution is to get a battery that tells you the ohms, saves a lot of bother

There are loads of not too expensive bits of kit that will do the job, all of them(probably) are VV at least and probably VW, so it is a win win

[Phoenix .]

Sept 13, 2013 8:52:42 GMT raid2506 said:

I can't say I have as I throw all mine in together and enjoy the lucky dip.if it fit's I use it

I would advise that you separate them upon delivery and keep them that way.

Not heard of anybody cleaning heads in a bowl of soapy water though, that must taste interesting?

No they are fine gets them really clean, rinse really well in warm water pat dry then leave in the open air to dry.

I will do as you suggest and keep them separate and labelled in the future.

[jakethevape]

Sept 13, 2013 8:35:21 GMT Phoenix . said:

Why or why are these heads not stamped with the ohm's.?

After cleaning these in a bowl of soapy water, I forget which ohm they are and that results in frustrating vaping, I use ego Twists, vision Spinner batts. I get hardly any vapour , button gets hot even on 3.2.

Thing is , when I buy new heads I pop them all in a bag(unlabelled) consequently I don't know what ohm's I am using, I buy 1,8 and 2.5.

Anyone else had this problem?

If you look really REALLY carefully it is stamped on it. However the stamping method is not spot on as some are perfect on the metal peice just under the threading that goes into the "tank base" but other-times its half printed on this and half printed on the rubber seal gasket.

Funny enough I have just replaced one (wow how much better it is with a new one after 6 days chain vaping on one lol) all my ones are labeled up (some slightly drunk stamped lol)

[charon]

Now here is an intriguing idea.. (BUY new heads?)

Note to self make friends at next vape meet with The Phoenix Must have " loads of money"

[Phoenix .]

Sept 13, 2013 10:34:22 GMT dragon said:

Super-Shiny

The less organised solution is to get a battery that tells you the ohms, saves a lot of bother

There are loads of not too expensive bits of kit that will do the job, all of them(probably) are VV at least and probably VW, so it is a win win

I am sooo silly, I do have a Sigelei, but not used much, don't want to wear it out.

I will test them on that first.....old age creeping up fast.!

[dragon]

Sept 13, 2013 10:38:20 GMT Phoenix . said:

Sept 13, 2013 10:34:22 GMT dragon said:

Super-Shiny

The less organised solution is to get a battery that tells you the ohms, saves a lot of bother

There are loads of not too expensive bits of kit that will do the job, all of them(probably) are VV at least and probably VW, so it is a win win

I am sooo silly, I do have a Sigelei, but not used much, don't want to wear it out.

I will test them on that first.....old age creeping up fast.!

Now I feel less alone, I tend to use the stuff I like least hoping it will wear out, and the stuff I like best gathers dust, because I don't want it to wear out

I have a cunning plan against old age, the first thing I am going to forget is how old I am

[Phoenix .]

Sept 13, 2013 10:38:10 GMT charon said:

Now here is an intriguing idea.. (BUY new heads?)

Note to self make friends at next vape meet with The Phoenix Must have " loads of money"

Sure I have charon , I'm on a pension we get loads of dosh.

I know I can rebuild them but, I am a kinetic learner and no-one has shown me how.

[Deleted]

Phoenix . it is etched on them, or at least, on the ones I have. You do need darn good light & a magnifying glass to see it though.

What was it you were saying about old age?

[dragon]

Really cheap coils here ebnferro.com/onderdelen-1/heads-coils-wicks/kanger postage is free and only takes a few days

[charon]

Here ya go mate,

not to worry, only 4 years to go for me till pension time, really looking forward to retirement NOT










Edit : oops double tapped there.

[Jezarel]

I use wattage so ohms don't phase me. Everything is awesome. :-D


Regards
Jez

[Phoenix .]

Sept 13, 2013 10:44:18 GMT jess said:

Phoenix . it is etched on them, or at least, on the ones I have. You do need darn good light & a magnifying glass to see it though.

What was it you were saying about old age?

Yea, luckily I have a magnifying glass,I did find the etching on them, thanks for that jesse.