Igo W rollercoaster build

[ginge7289]

I just put one of these on my igo W and it seems pretty solid, it also seems to hold more juice compared to laying the wick flat on the deck, but its early days.

[Roscopecotrain]

I have seen these ginge but have not got round to doing one, do they vape better then?

[ginge7289]

Sept 23, 2013 14:16:34 GMT Roscopecotrain said:

I have seen these ginge but have not got round to doing one, do they vape better then?

It seems better than the two flat wicks I had on it previously. Ill test it out today and see how it goes

[chuck]

Nice find ginge, let us know how it goes

[djs]

I'm a coaster fiend.

I might try re-coiling on Nemesis as an Autumn treat to myself.

...even Vaping on the "Big One" is definitely on my bucket list.



I can see the headlines already (Daily mail...of course)

eVic Vaper busted on shockwave coaster at theme park - Mr Mean from the MHRA says there is no evidence vaping at 5 Gs is any safer than toking on a fat roll-up after eating 6 KFC family buckets.

[ginge7289]

So I am about 4 hours in with this set up and it is a lot better than two bits of wick on the deck, this has the benefit of wicking from the top and collecting the juice that may find its way to the deck. It is a lot easier to drip onto as well, straight onto the top of the wick (I have not pushed mine to the side like in the video) and it just keeps going. So far so good

[ginge7289]

Roscopecotrain im sitting here wondering if I can fit this in the scar. Im feed up of dripping into the scar every 5 toots and this would work nicely if it fits

[Roscopecotrain]

Sept 23, 2013 18:00:31 GMT ginge7289 said:

Roscopecotrain im sitting here wondering if I can fit this in the scar. Im feed up of dripping into the scar every 5 toots and this would work nicely if it fits

Worth a shot, will be a squeeze though. Put some pics up of you get some success.

[Deleted]

Wanna try micro coiling and cotton, i have an IGO-W dual coiled with cotton at 0.5 ohms, and it blows my socks off

(obviously don't go that low unless you can do it safely)

[ginge7289]

I just tried a 2.ohm coil with cotton wool in my dream and the flavour is nowhere near as good as this set up in my Igo. Im waiting on some 0.3 kanthal so I will get some micro coils built when that arrives

[ginge7289]

Sept 23, 2013 18:44:24 GMT Roscopecotrain said:

Sept 23, 2013 18:00:31 GMT ginge7289 said:

Roscopecotrain im sitting here wondering if I can fit this in the scar. Im feed up of dripping into the scar every 5 toots and this would work nicely if it fits

Worth a shot, will be a squeeze though. Put some pics up of you get some success.

Don't bother trying it makes the draw rubbish, I managed to get it in but it gave a poorer vape.

[Roscopecotrain]

Sept 26, 2013 16:50:12 GMT ginge7289 said:

Sept 23, 2013 18:44:24 GMT Roscopecotrain said:

Worth a shot, will be a squeeze though. Put some pics up of you get some success.

Don't bother trying it makes the draw rubbish, I managed to get it in but it gave a poorer vape.

Thanks ginge.

Sent from my Galaxy Note 2

[ginge7289]

Sept 23, 2013 23:47:25 GMT digiw0rx said:

Wanna try micro coiling and cotton, i have an IGO-W dual coiled with cotton at 0.5 ohms, and it blows my socks off

(obviously don't go that low unless you can do it safely)

Put one of these in today and I am impressed, it was a little fiddly with my stupid FT clone but I got there in the end, .25 kanthal 8 wraps and reading 1.1 ohms on a dual coil. Its a weapon lol.

[Deleted]

Got a 0.8 dual coil in my Nimbus at the moment, it's superb, i recoiled it to 0.8 instead of 0.5 because i was draining a panny in 3 hours lol.

[gapy360]

Hi ginge7289 going to recoil my Dripper today and thought I'd give this a go, can I ask if you used ribbon or wire? The vids I have seen have all used ribbon but as I don't have any thought I'd try wire.
Also going to use silica for the same reason.
I'm going to aim for 1.4 ohms so I can use it on my Vamo as well and see where we go from there