Filler material for a dreamoid?

[Dan]

Hi everyone,

After using my ss dream in standard mode for a while now, I have decided to have go at oid'ing it but need some advice as to what filler material I should be looking to use?

From what I have read its a close call between the blue juwel foam and the juwel pads.. question is.. which one is best?!

Has anyone else done the dreamoid conversion? How do you find it?

Many thanks in advance!

Dan

[Super-Shiny]

Think this is ok: www.amazon.co.uk/gp/product/B000G04LWM/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1

[Dan]

Oct 27, 2013 18:52:38 GMT Super-Shiny said:

Think this is ok: www.amazon.co.uk/gp/product/B000G04LWM/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1

That's the stuff.. just want to know if the foam works any better.. going to hopefully be a stepping stone to a spheroid if I can get my paws on one!

[Super-Shiny]

Ain't got a clue if foam works better as i don't have a spheroid yet

[Dan]

Oct 27, 2013 19:01:45 GMT Super-Shiny said:

Ain't got a clue if foam works better as i don't have a spheroid yet

Give it time.. you'll have one eventually!

Should have kept the dream.. only costs a few ££ to oid it and from what I've gathered the difference isn't massive!

[Super-Shiny]

Oct 27, 2013 19:09:03 GMT Dan said:

Oct 27, 2013 19:01:45 GMT Super-Shiny said:

Ain't got a clue if foam works better as i don't have a spheroid yet

Give it time.. you'll have one eventually!

Should have kept the dream.. only costs a few ££ to oid it and from what I've gathered the difference isn't massive!

My main aim now is the following:

1 x eVic with siam tube fitted with trap tank (Got)
1 x Nzonic clone fitted with Kayfun 3.1 (Got)
1 x Spinner fitted with spheroid (Got the spinner not the spheroid)

1 x eVic i use for testing ohms etc

Anything else is history

[Dan]

Oct 27, 2013 19:13:10 GMT Super-Shiny said:

Oct 27, 2013 19:09:03 GMT Dan said:

Give it time.. you'll have one eventually!

Should have kept the dream.. only costs a few ££ to oid it and from what I've gathered the difference isn't massive!

My main aim now is the following:

1 x eVic with siam tube fitted with trap tank (Got)
1 x Nzonic clone fitted with Kayfun 3.1 (Got)
1 x Spinner fitted with spheroid (Got the spinner not the spheroid)

1 x eVic i use for testing ohms etc

Anything else is history

Way to organised!!

I have 2 evics and one svd

5 terminators
1 davide
1 dream
1 igol

I swap between them all day everyday.. just screw an atty on and its lucky dip of the flavour I get!

[Super-Shiny]

My idea behind it Dan is:

eVic with siam tube fitted with trap tank (For Tobacco juices)
Nzonic clone fitted with Kayfun 3.1 (For Dessert juices)
Spinner fitted with spheroid (For Mints/Menthols/Absinthe/Aniseed juices)

Got to the point of thinking why would i need anything else as i have all flavors covered and i cannot vape two mods/attys at the same time

[spikus]

Can I ask a silly question ?
I have no idea what you guys are on about...
What do you mean by "oiding "... Something to do with a spheroid I presume ... But still none the wiser

Sorry to be thick ...

[300]

Have used : Listed in order of preference.

Blue Foam - From John at Flavourart
Juwel Pads - From Whitefog, purchased with my Taifun
Sera Wool - From Ebay or Amazon (can't remember which)

Been using the same pieces of Blue foam for at least 6 months & it still looks new after a quick rinse & pat dry.

For the Spheroid & A7oid i find the Blue Foam easier to work with & easier to guage the right amount of filler material to pack in there, i always struggled to get the right amount with Sera Wool for effective wicking & gave up in frustration, i found the Juwel Pads much easier but the Blue Foam is spot on for me.

Can't speak for the Dreamoid which i think is 20mm diameter but i have an Olympus Hybrid which is 22mm set up in Oid mode & the Blue Foam does a good job in this atty too.

[300]

Oct 27, 2013 19:37:23 GMT spikus said:

Can I ask a silly question ?
I have no idea what you guys are on about...
What do you mean by "oiding "... Something to do with a spheroid I presume ... But still none the wiser

Sorry to be thick ...

See here

[Super-Shiny]

300 anywhere else you know off to buy the blue foam?

[300]

Oct 27, 2013 19:44:56 GMT Super-Shiny said:

300 anywhere else you know off to buy the blue foam?

Sorry Romelee, i've never looked for it, i got mine when John was asking for donations to his chosen charity last year in return for a square of his 'Wonderfoam'

[Super-Shiny]

Thanks 300 i suppose it will have to do with Juwel Pads i got from Amazon or some of that GP Fluff version 2 from Vapourart.

Saying that i am getting ahead of myself, i ain't even got a spheroid yet

[Dan]

Oct 27, 2013 19:32:47 GMT Super-Shiny said:

My idea behind it Dan is:

eVic with siam tube fitted with trap tank (For Tobacco juices)
Nzonic clone fitted with Kayfun 3.1 (For Dessert juices)
Spinner fitted with spheroid (For Mints/Menthols/Absinthe/Aniseed juices)

Got to the point of thinking why would i need anything else as i have all flavors covered and i cannot vape two mods/attys at the same time

It does indeed make sense but I like to swap and change throughout the day..

Terminator 1 pvc
T2 apple pie & custard
T3 rhubarb and custard
T4 spearmint
T5 parma violets
Davide blueberry
Dream strawberry cheesecake

Can't be faffing with changing flavours in tanks constantly!