Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online Nov 22, 2024 19:27:48 GMT
|
Post by Deleted on Nov 21, 2013 23:48:19 GMT
Yes a 306 has a 510 fitting and will fit on a 510/ego battery - however low resistance 306s (1.5 ohms) draw a lot of current and can damage or shorten the life span of a battery under about 900ma. They are not compatible with a 510 drip tip you need a specific 306 drip tip.
|
|
boyofford
Super Member
currently ex smoker and ex vaper
Joined:November 2013
Posts: 1,994
Location:
Likes: 670
Recent Posts
Last Online Apr 16, 2017 20:34:11 GMT
|
Post by boyofford on Nov 21, 2013 23:52:51 GMT
Yes a 306 has a 510 fitting and will fit on a 510/ego battery - however low resistance 306s (1.5 ohms) draw a lot of current and can damage or shorten the life span of a battery under about 900ma. They are not compatible with a 510 drip tip you need a specific 306 drip tip. so a 1300mah vision spinner would be ok then, think one of my spares is 1100mah too.....sold!
|
|
eddy
New Member
dripping is the future
Joined:November 2013
Posts: 13
Location:
Likes: 6
Recent Posts
Last Online Mar 11, 2015 22:04:18 GMT
|
Post by eddy on Nov 22, 2013 0:12:02 GMT
|
|
boyofford
Super Member
currently ex smoker and ex vaper
Joined:November 2013
Posts: 1,994
Location:
Likes: 670
Recent Posts
Last Online Apr 16, 2017 20:34:11 GMT
|
Post by boyofford on Nov 22, 2013 0:18:55 GMT
Thanks, but to impatient for wait, ordered one in previous post on this thread.
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online Nov 22, 2024 19:27:48 GMT
|
Post by Deleted on Nov 22, 2013 7:03:50 GMT
Sorry to ask sill question but is a 306 dripper comaptible with a 510 battery? e.g. vision spinner? Or do I need a new battery too? I've got/ordered a few differnet juices and don't want to waste if don't like them yet, i.e. need more steeping or just don't like! figured I'd swap if found out they ain't for me after couple of drops. The 306 dripper has a 510 connection so it will fit any battery with a 510 connection including your spinner. They require a 306 drip tip which fits over the dripper unlike most other devices where the drip tip pushes or screws into the device.
|
|
lairey
VENDOR Employee/Associate
Queen of Creams
Joined:November 2013
Posts: 6,731
Location:
Likes: 6,773
Recent Posts
Last Online Apr 16, 2018 21:12:38 GMT
|
Post by lairey on Nov 22, 2013 9:34:10 GMT
Lairey that's just plain bad planning, you only need to get expensive items delivered to work, cheap drippers should always go to home address as you can tell your other half they were only a tenner Isn't it? I'm disgusted with my sub-standard planning skills!!!!
|
|
newdawn
Super Member
Joined:November 2013
Posts: 1,186
Location:
Likes: 831
Recent Posts
Last Online Apr 28, 2020 1:15:32 GMT
|
Post by newdawn on Nov 23, 2013 16:36:30 GMT
Have a bunch of joosejuice samples waiting to be sampled and this looks like just the job for testing them out. Ordered, with note to self - stop reading this forum because it's costing me a fortune!!!
|
|
boyofford
Super Member
currently ex smoker and ex vaper
Joined:November 2013
Posts: 1,994
Location:
Likes: 670
Recent Posts
Last Online Apr 16, 2017 20:34:11 GMT
|
Post by boyofford on Nov 23, 2013 19:46:07 GMT
Have a bunch of joosejuice samples waiting to be sampled and this looks like just the job for testing them out. Ordered, with note to self - stop reading this forum because it's costing me a fortune!!! Great minds think alike, had to double check I hadn't wrote that LOL. Sent from my HTC Sensation Z710e using proboards
|
|
boyofford
Super Member
currently ex smoker and ex vaper
Joined:November 2013
Posts: 1,994
Location:
Likes: 670
Recent Posts
Last Online Apr 16, 2017 20:34:11 GMT
|
Post by boyofford on Nov 26, 2013 1:13:11 GMT
Had a go with my new dripper today, tried out 8 joosejuice flavours as they arrived at same time in post... decided like mocha and brandy already, but need to be more patient with them!!!
Got loads of minty liquids last week as was convinced this was the way to go for me, now sick of mint flavours at least for all day vape.
|
|
newdawn
Super Member
Joined:November 2013
Posts: 1,186
Location:
Likes: 831
Recent Posts
Last Online Apr 28, 2020 1:15:32 GMT
|
Post by newdawn on Nov 26, 2013 10:19:15 GMT
Sigh. The Bauway LR Bridged landed this morning and I'm not having any luck with it. Screwed the first one in only to spot a crack in the bottom of it. The other two are crack free and I'm careful not to tighten them in, so no idea how the first one got that way. Can't even get the drip tip that came with it to fit over the top of any of them either. Any tips or tricks to sort this or will I be sending them back?
|
|
boyofford
Super Member
currently ex smoker and ex vaper
Joined:November 2013
Posts: 1,994
Location:
Likes: 670
Recent Posts
Last Online Apr 16, 2017 20:34:11 GMT
|
Post by boyofford on Nov 26, 2013 13:10:34 GMT
Sigh. The Bauway LR Bridged landed this morning and I'm not having any luck with it. Screwed the first one in only to spot a crack in the bottom of it. The other two are crack free and I'm careful not to tighten them in, so no idea how the first one got that way. Can't even get the drip tip that came with it to fit over the top of any of them either. Any tips or tricks to sort this or will I be sending them back? I wasn't sure what to do at first to be honest! I screwed one onto my battery then pulled the yellow bit off, dripped little juice and pushed the drip tip on. Worked ok on first juice, other juices I just dripped down top. Guessing I did it right?! worked anyhow. Figure them yellow/orange bits are not needed for what we want them for.
|
|
4madcats
VENDOR
Sic 'em Kitty
Joined:October 2012
Posts: 1,072
Location:
Likes: 525
Recent Posts
Last Online Jun 17, 2014 10:57:49 GMT
|
Post by 4madcats on Nov 26, 2013 13:22:23 GMT
Sigh. The Bauway LR Bridged landed this morning and I'm not having any luck with it. Screwed the first one in only to spot a crack in the bottom of it. The other two are crack free and I'm careful not to tighten them in, so no idea how the first one got that way. Can't even get the drip tip that came with it to fit over the top of any of them either. Any tips or tricks to sort this or will I be sending them back? newdawn, just a quickie but have you taken the brown transit cover off, the atomiser is all metal so it would be really hard to crack. The transit cover is semi-transparent so you can see where the actual atomiser ends, easiest way is to fit it to a battery & wiggle the cover off. Edit just seen boyofford post above & no you don't need the transit cover, but I will update the website with a picture similar to this one showing one with a brown cover
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online Nov 22, 2024 19:27:48 GMT
|
Post by Deleted on Nov 26, 2013 13:27:08 GMT
newdawn and boyofford This is the instructions on using the Bauway drippers (copied from the ecigs4vaping web site) Instructions:- When you receive your Atomiser it will come with a plastic transit cover, either black or light brown. To remove this simply grip it at the top, you'll be able to feel where the actual Atomiser ends & pull the cover off gently. Put 2/3 drops of liquid on the raised bridge section & allow to soak for approx 30 seconds. When those drops have soaked in you can either add another 3 drops then place the drip tip over the atomiser, or place the drip tip on & drip your E-liquid directly through it. When you feel the vapour is tailing off add another 3 drops, do not be tempted to use any more then this at any one time as this can flood your Atomiser and leak liqiud on to your battery. If this happens please remove the excess juice immediately and ensure all connections are clean before carrying on. EDIT: crossed posts with ecigs4vaping LOL
|
|
newdawn
Super Member
Joined:November 2013
Posts: 1,186
Location:
Likes: 831
Recent Posts
Last Online Apr 28, 2020 1:15:32 GMT
|
Post by newdawn on Nov 26, 2013 13:34:05 GMT
Oh good grief! Been so busy reading up on mixing juices, I didn't think to check the site's instructions for these. Yep...all works great now. Thanks everyone helping with such a silly question. Am genuinely sat here giggling mad and the dogs are wondering what's up. What a goof!
|
|
4madcats
VENDOR
Sic 'em Kitty
Joined:October 2012
Posts: 1,072
Location:
Likes: 525
Recent Posts
Last Online Jun 17, 2014 10:57:49 GMT
|
Post by 4madcats on Nov 26, 2013 13:49:42 GMT
Oh good grief! Been so busy reading up on mixing juices, I didn't think to check the site's instructions for these. Yep...all works great now. Thanks everyone helping with such a silly question. Am genuinely sat here giggling mad and the dogs are wondering what's up. What a goof! No worrries, but I was getting a bit worried when you said cracked, thought RM had been stomping dancing . . not handling my parcels with due care & attention
|
|