Kayfun 3.1 clone help needed.

[denis9t9]

Ok so my kayfun clone arrived from Fasttech yesterday, just giving it a quick once over & it looks geat for the money & worth the wait (4 weeks) but when you take the top section off the chiminey does not look long enough to reach the seal, is this normal or have i got a duffer?

[Carpe Vapor]

The underside of the top part where the driptip goes should have a small o-ring

The top of the chimney should seat in to this o-ring when the unit is screwed together

[denis9t9]

Dec 13, 2013 11:24:07 GMT Carpe Vapor said:

The underside of the top part where the driptip goes should have a small o-ring

The chimney should seat in to this o-ring

Yes Carpe Vapor it does but the chiminey part only just touches the top section where the o ring is seated is this normal?

[OneDay]

Dec 13, 2013 11:44:07 GMT denis9t9 said:

Dec 13, 2013 11:24:07 GMT Carpe Vapor said:

The underside of the top part where the driptip goes should have a small o-ring

The chimney should seat in to this o-ring

Yes Carpe Vapor it does but the chiminey part only just touches the top section where the o ring is seated is this normal?

As long as it's sealing to that O ring, yes

[Carpe Vapor]

Try poping some water in it and hold it over the sink upside down

if no water comes out the driptip hole then it is sealed.

[markm]

Dec 13, 2013 11:53:04 GMT Carpe Vapor said:

Try poping some water in it and hold it over the sink upside down

if no water comes out the driptip hole then it is sealed.

If you try this make sure you block off the juice feed groves
because water will get into the chamber and then out the chimney.

[denis9t9]

Dec 13, 2013 11:53:04 GMT Carpe Vapor said:

Try poping some water in it and hold it over the sink upside down

if no water comes out the driptip hole then it is sealed.

Will do Carpe Vapor thanks markm, OneDay.

[denis9t9]

Dec 13, 2013 11:22:12 GMT denis9t9 said:

Ok so my kayfun clone arrived from Fasttech yesterday, just giving it a quick once over & it looks geat for the money & worth the wait (4 weeks) but when you take the top section off the chiminey does not look long enough to reach the seal, is this normal or have i got a duffer?

On further investigation all is well, the chimney reaches the seal & no leaks.
Stuck in a figure of 8 wick & wow what a great vape, worth all the wait just need to mix some lower nic liquid as it really pumps out the nic.

[Super-Shiny]

denis9t9 have a little dab at this build when you get a chance, dead easy and works really well: allaboute-cigarettes.proboards.com/thread/32981/kayfun-3-microcoil-cotton-guide?page=1&scrollTo=583607

[denis9t9]

Dec 15, 2013 20:25:59 GMT Super-Shiny said:

denis9t9 have a little dab at this build when you get a chance, dead easy and works really well: allaboute-cigarettes.proboards.com/thread/32981/kayfun-3-microcoil-cotton-guide?page=1&scrollTo=583607

Cheers Super-Shiny looks like a good simple set will give it a go when i get chance over Christmas.
Have you any idea where to get the green filler tips from?
Just waiting for my Taifun & ss Tank to arrive from Fasttech then thats all my self presents done
Tracking says in the GB so hopefully in the next couple of days

[Super-Shiny]

denis9t9 i got mine from here: www.cloud9vaping.co.uk/epages/yxve46fvrnud.sf/en_GB/?ObjectPath=/Shops/yxve46fvrnud/Products/B70-86

[fiddles]

Dec 16, 2013 12:26:35 GMT Super-Shiny said:

denis9t9 i got mine from here: www.cloud9vaping.co.uk/epages/yxve46fvrnud.sf/en_GB/?ObjectPath=/Shops/yxve46fvrnud/Products/B70-86

£2.95 Postage for 5 little tips, No Way I am paying that I will continue to fill from the top

[Super-Shiny]

Dec 16, 2013 12:32:41 GMT fiddles said:

Dec 16, 2013 12:26:35 GMT Super-Shiny said:

denis9t9 i got mine from here: www.cloud9vaping.co.uk/epages/yxve46fvrnud.sf/en_GB/?ObjectPath=/Shops/yxve46fvrnud/Products/B70-86

£2.95 Postage for 5 little tips, No Way I am paying that I will continue to fill from the top

This better: www.vapeescape.co.uk/Mixology/Empty-Bottles/Pack-Of-5-Flow-Tips-18G.Html

[fiddles]

Dec 16, 2013 12:34:18 GMT Super-Shiny said:

Dec 16, 2013 12:32:41 GMT fiddles said:

£2.95 Postage for 5 little tips, No Way I am paying that I will continue to fill from the top

This better: www.vapeescape.co.uk/Mixology/Empty-Bottles/Pack-Of-5-Flow-Tips-18G.Html

thats better but will wait until i need more stuff so postage is worth it

[chrisjw]

I got mine here...............
www.ebay.co.uk/itm/271195098950?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649