Kayfun clone top o ring

[londongemini]

Hi Folks,

My 3rd kayfun clone has landed. SO far, i have one from modsandatties (the best one) one from fasttech and finally my kayfun lite clone from vapour break. Unfortunately this one seems to be missing the o ring on the top cap that engages with the internal chimney. so i was wondering what size replacement i need?

thanks

ps, i will put up a review comparing all 3 at some point but in short, the modsandatties clone is by far the best even though it has a couple of issues

[giles]

Mine is outside diameter 8mm, thickness 1mm.

[londongemini]

thanks! i will try and find some one ebay

[izan]

Drip tip o-ring

Have fun
I

[londongemini]

Dec 17, 2013 10:16:44 GMT izan said:

Drip tip o-ring

Have fun
I

Thanks. I tried that but it didnt fit. it was a little too big. TBH, i dont know why they didnt include some of these with the spares

[izan]

I had to try a few different 510 drip tips till I found one that worked. (R91)

Best of luck
I

Alba has a few alba-vapours.co.uk/index.php?route=product/search&filter_name=o-ring

[pyr0]

I bought some viton o-rings for my kfl a while ago...
These ones fit inside my top caps; 5mm I/D x 1.5mm C/S
www.ebay.co.uk/itm/221133315255?var=520113833524&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

[fiddles]

My 2 Vapour Break KFL clones came with spares pack, 2 big o rings, 2 small o rings , 2 deck screws & refill screw plus another packet with allen key small screw driver & some premade wicks

[londongemini]

Dec 17, 2013 11:10:50 GMT pyr0 said:

I bought some nitrile o-rings for my kfl a while ago...
These ones fit inside my top caps; 5mm I/D x 1.5mm C/S
www.ebay.co.uk/itm/221133315255?var=520113833524&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

thanks. thats very helpful

[londongemini]

Dec 17, 2013 11:12:43 GMT fiddles said:

My 2 Vapour Break KFL clones came with spares pack, 2 big o rings, 2 small o rings , 2 deck screws & refill screw plus another packet with allen key small screw driver & some premade wicks

I think they must be different batches as i orders 3 and none had a spare o ring for the top. They did have a 510 o ring though.

[ukric]

Dec 17, 2013 9:40:50 GMT londongemini said:

Hi Folks,

My 3rd kayfun clone has landed. SO far, i have one from modsandatties (the best one) one from fasttech and finally my kayfun lite clone from vapour break. Unfortunately this one seems to be missing the o ring on the top cap that engages with the internal chimney. so i was wondering what size replacement i need?

thanks

ps, i will put up a review comparing all 3 at some point but in short, the modsandatties clone is by far the best even though it has a couple of issues

Send me your address I'll pop a couple in the post

[londongemini]

Dec 17, 2013 13:26:55 GMT ukric said:

Dec 17, 2013 9:40:50 GMT londongemini said:

Hi Folks,

My 3rd kayfun clone has landed. SO far, i have one from modsandatties (the best one) one from fasttech and finally my kayfun lite clone from vapour break. Unfortunately this one seems to be missing the o ring on the top cap that engages with the internal chimney. so i was wondering what size replacement i need?

thanks

ps, i will put up a review comparing all 3 at some point but in short, the modsandatties clone is by far the best even though it has a couple of issues

Send me your address I'll pop a couple in the post



thanks. you are a star!