Nemesis : lost ickle pin

[Gary Horder]

Yep, the stupidly small pin flew out of my nemesis fire button in to the realms of the shag pile, now the button just twists, is clunky and just not working well, have tried to use bits of wire match sticks etc. to no avail, would magnet sort this ( have read but not seen them ) or any other fixes.

regards 

Winter is coming

[Fockskey]

You could cut down a drill at the shaft, (the shaft is softer) that is the same diameter as the pin. If you use one of those cheap drills it will cut with a hacksaw. Let me know if you need the diameter of the pin and I will measure it.

[lazydog]

I have heard people ditching the pin when using magnets,these are what I have in mine but I have kept the pin 3 magnets in one Nemmy and just the 2 in the other.
here

[Super-Shiny]

14 gauge Blunt Needle is pretty much spot on, might need a little sanding down but it works, obviously will have to cut it down to size.

[Gary Horder]

Ahhh a needle, have loads of those, you star thanks for the replies guys, have just bought some aussie magnets as well