Sigelei Z max

[Phoenix .]

I have a minor problem with the above.
There is a ring at the bottom of the connector that keep either falling out or attaching itself to the clearo I am using, I just know I am going to lose it one of these days. Should it have a washer or something attached to keep it in place? I cannot what it's function is.

[chrisjw]

If you mean the little clear rubber o-ring, it's probably worn & needs replacing......give raid2506 a p.m...........

[Phoenix .]

No Chris is not that one , it is metal screw type only it doesn't screw in anywhere, it slots over the top of the connector and just drops down, nothing holding it in place? As I have never removed the clearomiser connector I fail to see how it has become loose.
Should it have a little white O' ring do you think?

[raid2506]

Jan 20, 2014 11:02:48 GMT Phoenix . said:

I have a minor problem with the above.
There is a ring at the bottom of the connector that keep either falling out or attaching itself to the clearo I am using, I just know I am going to lose it one of these days. Should it have a washer or something attached to keep it in place? I cannot what it's function is.

There is a brass ring around the outside base of the 510 connector which forms the eGo thread component.
As far as I know it's only a friction fit and so could possibly come loose over time.

If you only ever use a 510 fitting clearo then it won't be a problem to lose it. If you want to use eVods or similar then it will need to be fixed as they won't work without it.