Itaste MVP V2.0 vapour probs

[bro]

received one of these on Saturday with the iclear 30 but not getting much flavor out of my e liquid ,gone through the volts from lowest to highest but still crap to be honest,i get more flavour our of my v3 clearomizer and a standard ego battery,cant test anything else on it at the moment as the clearomizer wont work on it and waiting for wick to try my agat+ on it,no funds at the mo to buy anything else,,,any ideas peeps,got an airflow controller on the way if that makes any difference

[djs]

How is your V3 ON the MVP?

(oh, it doesn't work...)

It's more likely to be the i30 than anything else.

[dagl]

Jan 20, 2014 21:00:15 GMT djs said:

How is your V3 ON the MVP?

(oh, it doesn't work...)

It's more likely to be the i30 than anything else.

You could try the i30 on the ego see if it works? Maybe only one of the coils is working, What's the resistance reading?

[bro]

resistance is a 2.1 is that right,the i30 on the ego is crap

[djs]

Jan 20, 2014 21:15:57 GMT bro said:

resistance is a 2.1 is that right,the i30 on the ego is crap

It will be. Turn it upside down and read on the bottom

"VV/VW"

I have to pump these up to *at least* 9.0 watts just to get it started. I've had the MVP on 11.0.

This sort of power is NOT my thing at all. Your eGo won't touch the sides. Sorry to bear bad news.

[Deleted]

2.1 is exactly what it should be

[Deleted]

Have you checked with a multimeter across the 510 positive pin and negative threads that the MVP is producing the voltage that you have set it for?

[dagl]

Sounds ok to me bro in fact exactly the same as I'm on atm, only other suggestion would be to try alternative ejuice if possible, tho tbf if it's been ok on your other setup I can't see that being the problem..

[bro]

Jan 20, 2014 21:24:34 GMT @freefromsmoking said:

Have you checked with a multimeter across the 510 positive pin and negative threads that the MVP is producing the voltage that you have set it for?

got a multimeter here,unsure of what to put it on

[bro]

Jan 20, 2014 21:38:57 GMT bro said:

Jan 20, 2014 21:24:34 GMT @freefromsmoking said:

Have you checked with a multimeter across the 510 positive pin and negative threads that the MVP is producing the voltage that you have set it for?

got a multimeter here,unsure of what to put it on

juice fine and good flavour and vape on my v3 and standard ego battery

[dagl]

"waiting for wick to try my agat+" Improvise wick!!

[keepitgoin]

Daft question I know bro, but did you Click the Button a few times on the MVP?? Just wondering if it's turned off? If you have another tank, check that on your MVP, the 510 pin may not be making contact. I Vape an iClear 30 on an MVP all day, at between 4.2v and 5v and it still impresses me with it's all round Hit!

[bro]

Jan 20, 2014 21:44:07 GMT keepitgoin said:

Daft question I know bro, but did you Click the Button a few times on the MVP?? Just wondering if it's turned off? If you have another tank, check that on your MVP, the 510 pin may not be making contact. I Vape an iClear 30 on an MVP all day, at between 4.2v and 5v and it still impresses me with it's all round Hit!

yeh mvp definately on,i get smoke but hardly and flavour,seems very muted,dont have another tank at the mo

[keepitgoin]

Try taking off the head, remove rubber cap, give it a wash and Dry Burn and see if the coils light up bro, maybe the coils are dead, my iClear 30 hits hard, but there could be dud ones. Post back here if you don't get my drift on Dry Burning.

[Deleted]

Jan 20, 2014 21:38:57 GMT bro said:

Jan 20, 2014 21:24:34 GMT @freefromsmoking said:

Have you checked with a multimeter across the 510 positive pin and negative threads that the MVP is producing the voltage that you have set it for?

got a multimeter here,unsure of what to put it on

Set the MVP to, say 4 volts then set the multimeter to a low DC voltage range (to read about 4 volts), touch the red lead to the pin in the centre of the 510 connector and the black lead to the threaded part of the 510 connector and ask your partner/friend to press the power button. The multimeter should read close to 4 volts (there will be a small voltage drop within the multimeter leads). If the voltage reading is much less then the MVP ain't producing the voltage that it should.