Orieco Storm RDA, anyone used one? looks similar to origen

[boyofford]

Mar 13, 2014 0:10:01 GMT boyofford said:

Well it was surprisingly easy to place the coil horizontal above the screw.

I took some picks, will have to post tomorrow now though if you want to have a look.

Did one micro coil using 0.25mm kanthal, about eight turns around a 2.5/3mm drill bit(I really should measure it as I've forgot!) Came out at 2.1 ohms.

Plenty of vaper for what it is, but I still prefer lower ohm setup for flavour and throat hit, but that's probably just because its what I'm used too.

Edit... Here's some pics and a video... I'll post them properly tomorrow when on computer www.dropbox.com/sc/7jtazrty0ycug03/VVT2EIqsyp

Sent from my HTC Sensation Z710e using proboards

Couple of pics of my horizontal single coil build with wick going into both wells in link, and a vid of vape produced above smarties

Only did it to see how easy it would be to put a coil in that position to be honest though as @tazmania441 suggested it(or I did I forget!), not a recommend though it was easy enough, I prefer vertical.

[smarties]

Just tried that single coil build boyofford and it's superb thanks very much for that I see what the fuss is now about drippers it's working perfectly so might as well take it apart and try a dual vertical setup 

[Steve (VapeStorm)]

Orieco storms are back in stock

[Deleted]

Apr 4, 2014 19:42:11 GMT Steve (VapeStorm) said:

Orieco storms are back in stock

Where?

[Steve (VapeStorm)]

Greyhaze ordered one earlier

[enjay]

How do you feel this compares to the origen? My origen just arrived today, similar money and great quality. Gonna set it up in a bit

[Steve (VapeStorm)]

enjay theres a comparison earlier in this thread

[enjay]

Apr 4, 2014 20:50:27 GMT Steve (VapeStorm) said:

enjay theres a comparison earlier in this thread

Ah geez, reading, I'll take a look later on the main pc, easier with a 22inch wide screen than a crappy little poxy net book lol

[spikus]

Got my storm yesterday.. Dual coils .8 ohms ... Bloody lovely

[boyofford]

Apr 4, 2014 20:38:37 GMT enjay said:

How do you feel this compares to the origen? My origen just arrived today, similar money and great quality. Gonna set it up in a bit

Vape wise, more airy and perhaps slightly more flavour, but fine line flavour wise .

Compared to origen clone I have it is poorer build quality, but half the price.
Origen has bigger drip wells, and better orings.

Where did you get your origen clone from? Mine got nuked by my leaving fire button firing! ...still ain't looked at fixing it.

Sent from my C6903 using Tapatalk 2

[Deleted]

Apr 4, 2014 22:37:57 GMT boyofford said:

Apr 4, 2014 20:38:37 GMT enjay said:

How do you feel this compares to the origen? My origen just arrived today, similar money and great quality. Gonna set it up in a bit

Vape wise, more airy and perhaps slightly more flavour, but fine line flavour wise .

Compared to origen clone I have it is poorer build quality, but half the price.
Origen has bigger drip wells, and better orings.

Where did you get your origen clone from? Mine got nuked by my leaving fire button firing! ...still ain't looked at fixing it.

Sent from my C6903 using Tapatalk 2

not sure but they have them here www.modsandatties.com/gb/home/144-the-origen-rda-clone.html

[enjay]

Apr 4, 2014 22:37:57 GMT boyofford said:

Apr 4, 2014 20:38:37 GMT enjay said:

How do you feel this compares to the origen? My origen just arrived today, similar money and great quality. Gonna set it up in a bit

Vape wise, more airy and perhaps slightly more flavour, but fine line flavour wise .

Compared to origen clone I have it is poorer build quality, but half the price.
Origen has bigger drip wells, and better orings.

Where did you get your origen clone from? Mine got nuked by my leaving fire button firing! ...still ain't looked at fixing it.

Sent from my C6903 using Tapatalk 2

Got it off ebay, £18 all in, it's a tobeco clone but the quality is superb, everything about the build is spot on. The o rings are perfect, you can take it apart without attaching it to a mod but they're still nice and tight that there's no play. Nice big airy drip tip too.

Just away to set it up just now with a single coil and probably some silica.

[enjay]

Pretty smooth, needs a lower ohm coil though but so far definitely better than the trident v2 imo





Just redone the coil to bring it down a bit, now at .8 ohms and still awesome! Stuck it on the svd first, not bad but stuck it on the nemmy and now it's just chucking the clouds!

[enjay]

Also it's a version 2, I asked the seller, he reckons it says so in the listing but I can't see it. I only got my suspicions after looking at pics of the V2.

[boyofford]

Apr 5, 2014 2:17:01 GMT enjay said:

Also it's a version 2, I asked the seller, he reckons it says so in the listing but I can't see it. I only got my suspicions after looking at pics of the V2.

Good find!!! Yeah looks like a clone of the origen v2 I think .....that was quick. Now do I need one? No....do I want one? Yes!

Rather than a v2 clone of the v1....the v1 clone of the v1 had too many holes lol.

Sent from my C6903 using Tapatalk 2