Nightshard
New Member
Joined:February 2014
Posts: 8 
Location:
Likes: 2
Recent Posts
Last Online Feb 23, 2014 7:14:56 GMT
|
Post by Nightshard on Feb 19, 2014 21:51:35 GMT
Rebuilding the Nautilus coil will make it preform even better, but it's a bit tricky.
1. The coil has to be placed exactly within the grooves (not too high, not to low and straight), It is highly recommended that the coil leads are as straight as possible, since you will be using them to place the coil correctly.
2. The coil leads will be longer then what you're used to from rebuilding other heads, since the Nautilus head is quite long, as a result you should do 2 less wraps that what you're used to. At my first try i was aiming for 1.4 ohms with 7 wraps of 0.30mm but ended up with a 1.8 ohm coil, my next build was 5 wraps at 1.3 ohm.
3. If you're using a cotton wick (which you should), make it more robust then what you're used to, otherwise it might move when you insert it into the grooves.
4. before you actually try to rebuild it watch a vid, here a nice one:
|
|
