up in the air

[zax47]

My itaste vv3 is up in the air coming from fastech it left China on the 23rd along with a bag full of other stuff i couldn't resist lol so it will be here soon all being well can't wait . Its becoming expensive stopping smoking lol.anyway it should have paid for itself in a few months.

i have gone through loads of kanthal 0.32 wire trying to make coils but i can't get the hang of it even though i have watched loads of vids they all make it look so easy i blame my sausage fingers. Just ordered some 0.25 kanthal wire hope that makes it a bit easier to get a coil to work on a evod .
Iam finding diy mixing easier than making coils thats been a great success so far.

[dinamic22]

Have you thought of getting 1 of greigster coil buddy even i can do coils with that

[Perpetua]

Or even some ready made coils could help make life a little easier zax47:

www.fasttech.com/products/1411/10007181/1591806

The one wick ones are easier for the Evod than the 4 version . . . plus it could give you another FT shopping opportunity.

Good to hear your mixing is going well.

[zax47]

Feb 25, 2014 9:53:07 GMT dinamic22 said:

Have you thought of getting 1 of greigster coil buddy even i can do coils with that

Looks like he uses hollow wick for that does he?

[zax47]

Feb 25, 2014 10:24:08 GMT Perpetua said:

Or even some ready made coils could help make life a little easier zax47:

www.fasttech.com/products/1411/10007181/1591806

The one wick ones are easier for the Evod than the 4 version . . . plus it could give you another FT shopping opportunity.

Good to hear your mixing is going well.

Got some of the spare heads on there way from fasttech and another evod really cheap hope there ok just had a look at your link there cheap not seen the coils only
Thanks

[dinamic22]

No zax47 you can use any on them its so easy but i must admit i do use ready made coils too when i cannot be bothered with faffing

[zax47]

Feb 25, 2014 11:27:14 GMT dinamic22 said:

No zax47 you can use any on them its so easy but i must admit i do use ready made coils too when i cannot be bothered with faffing

I was thinking if you did'ent use hollow wick with the drill bit the wick might be loose after removing off drill bit

[dinamic22]

Theres a hole at the side of the drill bit to put wick into & then just coil as normal its just like having a helping hand as you don't seem to have enough with two hands lol when coiling

[zax47]

Feb 25, 2014 15:19:22 GMT dinamic22 said:

Theres a hole at the side of the drill bit to put wick into & then just coil as normal its just like having a helping hand as you don't seem to have enough with two hands lol when coiling

So do you use double thickness of wick for evod ? If doing it that way. I must sound really thick give me a pig to cut up any day (I was a butcher ) lol
thanks

[dinamic22]

zax47 Haha i had to have a look as i didn't know off hand, i have 2.5mm silica wick that i use & just use it single i don't use evods i have Davide mini's (glass) but the heads are the same, i cut a piece of wick approx 5 or 6 cms long & after coiling & fitting it in the head & putting it all back together (but before putting grommet back on) i trim it to size with nail clippers & no you don't sound thick how would anyone get to know anything if they don't ask questions.
I have added a pic to give you an idea but there are loads on here that know more about recoiling especially Super-Shiny he has put some guides on that you can find by clicking on his signature at the bottom of any of his posts/threads.



All my pics are always sideways but you get the idea lol 

[zax47]

Di thanks for all your help i think Super-Shinys guides are really good wished i had seen them earlier sometimes you can't see wood for trees
Thanks

[dinamic22]

You are welcome zax47 & yes Super-Shinys guides are good thats how i learnt to coil.

[zax47]

Happy days all my orders have arrived from FT this week & my Itaste vv3 came this morning fully charged. What a difference from my little ego batt. Just fiddling with settings my DIY juices have a lot more flavour , not tried the iclear 16s that I got with it yet that's next job. Looks like iam not going to get much done today lol