Which ones for the mini protank???

[OneDay]

Mar 26, 2014 23:21:37 GMT sammy13 said:

They're here
Got just these ones in the end after others going out of stock -
www.fasttech.com/products/0/10007181/1591806-pre-made-wires-and-wicks-for-atomizer-50-pack

The wire is a lot thinner than I expected, sort of thought it would be stiffer.

OneDay when I unravel the wire to use for the legs, how many loops should I be left with round the wick?

Looking at the pic on FT it looks like about 5/6

[sammy13]

Mar 26, 2014 23:37:31 GMT OneDay said:

Mar 26, 2014 23:21:37 GMT sammy13 said:

They're here
Got just these ones in the end after others going out of stock -
www.fasttech.com/products/0/10007181/1591806-pre-made-wires-and-wicks-for-atomizer-50-pack

The wire is a lot thinner than I expected, sort of thought it would be stiffer.

OneDay when I unravel the wire to use for the legs, how many loops should I be left with round the wick?

Looking at the pic on FT it looks like about 5/6

Thankyou, my wires not as spaced out as those so I thought well I could keep unwinding forever lol.
1.8 Must mean so many loops so thought I'd best check.

[babs]

I just got these they are great

Just put them in and pull a bit of cotton wool through.

[babs]

Not a very clear pic but they are just premade coils

[sammy13]

Do you have the fasttech link for them please babs, as I will be ordering again soon, my last order all the wicks went out of stock except the one packet above , it was a $50 order and I didn't want it delaying so I now have gift vouchers to use for the other wicks that I cancellled

[babs]

Hi sammy this is what I got www.fasttech.com/products/1611705 no wick just fit on a 14mm screwdriver or bit or a 14g needle then fit into head and pull some cotton wool through. Done 4 so far very easy and every one spot on 2.0 ohm. I looked at super-shinies micro coil and cotton guide to see how to do it very clear instructions.

[sammy13]

Thankyo, may as well try all types

[sammy13]

Mar 27, 2014 9:03:47 GMT babs said:

Hi sammy this is what I got www.fasttech.com/products/1611705 no wick just fit on a 14mm screwdriver or bit or a 14g needle then fit into head and pull some cotton wool through. Done 4 so far very easy and every one spot on 2.0 ohm. I looked at super-shinies micro coil and cotton guide to see how to do it very clear instructions.

Just thinking why do I need to put the head on a screwdriver?

[sammy13]

These ones -
www.fasttech.com/products/0/10007181/1591806-pre-made-wires-and-wicks-for-atomizer-50-pack
I have done 20, each one came out at 1.7.
They are fine, and I am so pleased that I did it OneDay but after a day I am finding that they need changing they start tasting burnt.

[babs]

Apr 3, 2014 18:36:40 GMT sammy13 said:

Mar 27, 2014 9:03:47 GMT babs said:

Hi sammy this is what I got www.fasttech.com/products/1611705 no wick just fit on a 14mm screwdriver or bit or a 14g needle then fit into head and pull some cotton wool through. Done 4 so far very easy and every one spot on 2.0 ohm. I looked at super-shinies micro coil and cotton guide to see how to do it very clear instructions.

Just thinking why do I need to put the head on a screwdriver?

Then it fits in the slot on the head holds it up while you fit it. You then thread cotton wool after it's fitted you can easily change the cotton wool without changing the whole coil just pull the old cotton wool out gently and thread new in.

[OneDay]

Apr 3, 2014 18:39:28 GMT sammy13 said:

These ones -
www.fasttech.com/products/0/10007181/1591806-pre-made-wires-and-wicks-for-atomizer-50-pack
I have done 20, each one came out at 1.7.
They are fine, and I am so pleased that I did it OneDay but after a day I am finding that they need changing they start tasting burnt.

What voltage or wattage are you using Sammy?

[sammy13]

Voltage 3.8 - 4 .

[GunJack]

dispatched 20 Mar, still waiting...... why is there not a "drumming fingers on table" smiley ??

[djs]

I'm still waiting for mine.

By the time they get here, I'll have microcoiled my entire stock @ 5 or so a day.

Then I won't need them...

[djs]

Apr 3, 2014 20:56:04 GMT GunJack said:

dispatched 20 Mar, still waiting...... why is there not a "drumming fingers on table" smiley ??

20th March?

I'm in with no chance this week then, probably not next either.

Slowtech...