Batterys for a unkick mech mod : Most powerfull

[virus2k]

Mar 20, 2014 12:00:37 GMT Perpetua said:

Mar 20, 2014 8:16:27 GMT virus2k said:

know of anywhere that has the 2500mah or higher 35a or higher ?

One of these may be what you're looking for virus2k.







Other than that I guess you're looking at devices that take a 26650/26500 battery . . . . .

hahaha now thats more like it unfortunatly i have no devices that will take those lol and would probably be in practical and to big of a mod lol...

[enjay]

Mar 20, 2014 8:07:23 GMT izan said:

Mar 20, 2014 5:08:13 GMT enjay said:

Well what I can tell you is the mah is the number you need to look for, the higher the number the longer the battery can last. Also if you use other kanthal and build you coils at a HIGHER resistance it should help. I can almost get a whole day out of an 18350, same type as you have. I reckon two of them would last a whole day of fairly heavy vaping but yeh, the higher ohm coils will run them down SLOWER.

Fixed that for you.


OP: Follow Perpetua's link.

Have fun
I

Higher ohms needs more power to get the coil fired up no? My battery seems to last longer with lower ohm coils

[djs]

More power or longer life? More power on a no-kick mod.. drop the resistance.

[izan]

Mar 20, 2014 16:41:38 GMT enjay said:

Mar 20, 2014 8:07:23 GMT izan said:

Fixed that for you.


OP: Follow Perpetua's link.

Have fun
I

Higher ohms needs more power to get the coil fired up no? My battery seems to last longer with lower ohm coils

Presume a 4.0V battery and single coils
With a 1.8? coil we draw 2.22 AMPS
With a 2.8? coil we draw 1.43 AMPS
Since batteries are rated in Amp hours/Milliamp hours, the higher the discharge rate (amps used), the shorter the run time. (battery life)

Cheers
I

[spikus]

Virus ... Using the same attie or coil on an un kicked mech mod , whatever battery you get will deliver the same amount of "power".... Some will do it for longer ( look for the higher mah figure ) ... Some will do it safer at lower resistances .. I.e high drain / higher C rating ... But if your after a bigger punch you have to increase the voltage ... That means using a kick or a vw/vv device
Put simply ... At full charge , at least to start with , on the set up you describe, all 3.7v batteries will hit with the same punch

[boyofford]

I could be wrong here, as I've not got a kick, but won't a kick allow you to use more of batteries mah?
I swap my batteries out at 3.6v ish as vape drops, but I sub ohm can't use a kick.

If your using higher ohms a kick will regulate the voltage to the setting you choose until battery is much lower (2.8v? might be making that number up?), but also provide protection as a bonus.
I just have a lot of batteries with low mah but high max discharge and swap all the time lol, not very efficient.

I've got a pair of torchys panasonic 3400mah that I plan to pair with a kick for holiday usage (I'll just have to use higher ohms)....... EDIT: won't fit nemesis, battery too wide.

Can someone confirm I'm right about on this?

[spikus]

A kick regulates the batteries voltage in relation to the resistance of the attie... If you set the kick to 10 watts it's will alter the voltage of the battery depending on resistance to give you 10 watts ... Just like a VW device

And yes they prevent over discharge ... Normally below 2.8 v thereby protecting battery life

[boyofford]

Just re read your post, the higher max amps won't make the battery output more power.... they will allow to vape safely if you are using low ohms which will use higher amps discharge.

If your using ohms around the 2ohm mark your only drawing around 2amps from the battery.
If that's your preferred vape then you may as well get one of the batterys with higher mah(which will usually have lower max amp discharge but you will be well under that)... and as I (and others maybe) said use a kick to keep the output regulated to what you want.

[chrisy]

izan, what you say is absolutely correct, up to a point. Unfortunately Herr Ohm is not pressing the button.

There is a dynamic going on here which means it is not quite so straightforward.

I'll explain if you are interested, but it might be boring.

[boyofford]

If you want to get the torchy panasonic 3400mah batteries heres his page advertising them ukvapers.org/Thread-Torchy-battery-prices

But you'll need to signup to ukvapers to get discount I think, that's what I did.
They are the yellow ones in the pic, he rewrapps them, he is a respected seller of batteries and knows his stuff.

Edit,: just checked and the above batteries are too wide for Nemesis.... at least they are for my fasttech Nemesis clone
The fit just, but reckon I'd wreck the battery coating if I used regular.

Personally I've got another mod they will fit, or might widen inside a Nemesis inside with a file.

[kalbo]

Mar 20, 2014 14:47:27 GMT virus2k said:

Mar 20, 2014 9:01:36 GMT blakey said:

www.ifancyone.com/Efest-IMR-18650-p/e18650250035a.htm

Out of stock LOL

Absy's got some! [e-mail]

[boyofford]

Mar 20, 2014 23:11:42 GMT chrisy said:

izan, what you say is absolutely correct, up to a point. Unfortunately Herr Ohm is not pressing the button.

There is a dynamic going on here which means it is not quite so straightforward.

I'll explain if you are interested, but it might be boring.

More of a rule of thumb I think? I have seen this before somewhere.

[boyofford]

Mar 20, 2014 23:15:43 GMT kalbo said:

Mar 20, 2014 14:47:27 GMT virus2k said:

Out of stock LOL

Absy's got some! [e-mail]

If he ain't sub ohming though I don't get the advantage though, or have I misread/or misunderstood something

[izan]

Mar 20, 2014 23:11:42 GMT chrisy said:

izan, what you say is absolutely correct, up to a point. Unfortunately Herr Ohm is not pressing the button.

There is a dynamic going on here which means it is not quite so straightforward.

I'll explain if you are interested, but it might be boring.

Thank you Chri,

I'm sure I could have been more verbose, but I just wanted to demonstrate that the faster you eat crisps, the sooner the bag is empty.

However, we are all here to learn, so, please share.

cheers
I

[virus2k]

thanks for the info guys and yes i get most of the information and already new the rest
i wont be subohming well probably do it in the future but the discharge of the nemi without kick is perfect for me

but i do have 2x kicks coming from fasttech just so that i have the option to use if i wish and i probably will use it so that it regulates battery amps properly with coil instead of at full power all the time.
and as for ohms yes thats what im looking for at the minute a higher lasting battery as currently all types will use the 4.2v with my 2.0-2.2ohms attys @10w output or round about that.

as for the panasonics i have those already and they do fit the HICIGAR nemisis clone that i have.... 3400mah ones that is.

will keep a eye out for higher rated ones there are ones on amazon that are 5000mah 18650s but i think there fake lol

i also will get a better idea what my nemi is putting out when my voltage checker arrives today or tommorow and i have a expromizer arriving tommorow so i cant wait for that....
all i need is to find out where i can get all from the same website these things

wick/wire and organic cotton wool and more ejuice lol