510 T atties

[fimckenzie]

Next query!!! Currently using the clearomisers with my Ego. Just received the 510T atties to try along with the ego t. Checked on line re filling them but the ones I have found are not mine. Mine have a hole in each end. Do i fill them just by dripping it in (won't it drip out?).

[bluemagnum]

No, you fill it from the end that fits in the atomiser. What I do instead of popping the cap off is to inject juice in with a syringe. If you have a vapour world bottle, the thin dropper will work as well. If you keep popping the caps off they get worn and fall off when you pull the cart off.

[VE Jason]

Or, if it's the 510-T Cartridges with a foam seal, just poke a syringe through and you will find a hole to fill through.

It won't drip out of the other end.

[fimckenzie]

These are the ones?

www.electravape.co.uk/510_T_Atomizers_With_Free_Tank/p756394_3858457.aspx

[VE Jason]

Never seen that type of 510-T Cartridge. Do they not have a cap on at all?

If they just have a clear hole, fill them inverted and push your 510-T Atomiser down into it, before turning it the right way up.

[Gordy]

Fi its difficult to tell from the pic but as the guys have said you will have to fill from the end that fits into the atomiser

[fimckenzie]

Just filled it and its working fine! Its amazing how much you depend upon instructions and when you don't get any you are lost (well I am anyway!). Thanks everyone.

[Gordy]

there really does seem to be a lack of instructions with vaping stuff ...all i say is thank goodness for forums like this