Help with itaste VV V3.0

[kiwi68]

Apr 14, 2014 21:42:03 GMT DiscoDes said:

What strength liquid are you using?

Using 50/50 18 mg juice 

[Greg]

Good luck kiwi68 I'm off to bed

[kiwi68]

Apr 14, 2014 21:45:03 GMT Greg said:

Are you using different attys on the Evod and itaste ?
If so take the atty your happy with off the Evod battery and put it on the itaste and see how that is.

Yes using the iclear 16 that came with the itaste, has a lot longer wick than my old attys, just tried it with my old ones, a lot better, not so strong or as much vape coming out 

[kiwi68]

Apr 14, 2014 21:46:40 GMT Greg said:

Good luck kiwi68 I'm off to bed

Night night gregb
Thanks for your help
sweet dreams 

[Greg]

If your not getting a burnt taste with the iclear maybe your just not used to it. Iclears have the coils at the top so the vape is much warmer than a bottom coil. If your old atty is an Evod then it's a bottom coil so cooler vape. Not aware the top coil would give more of a head rush though.

[djs]

Apr 14, 2014 21:22:10 GMT Greg said:

kiwi68 you can't have it on 4 volts and 8 watts at the same time,

or can you...

those numbers might be where two parallel dimensions meet just for a split ohm-age.

[decoy]

www.vapour-room.com/complete_starter_kits/complete_advanced_starter_kit_v3.htm
and scroll down to FAQ best distrucktions i have found for the vv3
hope that helps

[kiwi68]

Apr 14, 2014 21:54:22 GMT Greg said:

If your not getting a burnt taste with the iclear maybe your just not used to it. Iclears have the coils at the top so the vape is much warmer than a bottom coil. If your old atty is an Evod then it's a bottom coil so cooler vape. Not aware the top coil would give more of a head rush though.

Have got a mixture of top and bottom coiled attys, think I just sucked too hard on the itaste VV and had it on too high a setting, will give it another go in the morning thanks

[stewarty]

Just to add that the iClear 16 is duel coil so you will get more hit from it than an Evod as it will suck up more juice through the coil

Turning the power down a bit till you get used to it should help

[kiwi68]

Apr 14, 2014 21:55:04 GMT djs said:

Apr 14, 2014 21:22:10 GMT Greg said:

kiwi68 you can't have it on 4 volts and 8 watts at the same time,

or can you...

those numbers might be where two parallel dimensions meet just for a split ohm-age.

More a case of me being blind as a bat and having nooooooooooo idea what I am doing......  ???

[kiwi68]

Apr 14, 2014 21:55:39 GMT decoy said:

www.vapour-room.com/complete_starter_kits/complete_advanced_starter_kit_v3.htm
and scroll down to FAQ best distrucktions i have found for the vv3
hope that helps

A great help, thanks decoy, will have a read 

[djs]

Apr 14, 2014 22:01:33 GMT kiwi68 said:

More a case of me being blind as a bat and having nooooooooooo idea what I am doing......  ???

You're doing just fine. It's my little (sad) joke... I'm sure somebody will work it out by tomorrow Wednesday.

(You can have 4v and 8w at the same time.....)

or can you?

[kiwi68]

Apr 14, 2014 22:00:23 GMT stewarty said:

Just to add that the iClear 16 is duel coil so you will get more hit from it than an Evod as it will suck up more juice through the coil

Turning the power down a bit till you get used to it should help

Didn't know it was a double coil, did go through a lot of juice, wondered why.

Thanks stewarty, will turn it down and give it another go 

[marlbororman]

Variable voltage or variable wattage, one or the other, not both at the same time.
+ and power button held together switches to variable wattage mode.
- and power button held together switches to variable voltage mode
+ and - held together displays atty resistance and then total voltage remaining in battery
if you briefly press - or + button, it will show puffs taken since switched on and either the volts or the watts it is set to at the present moment in time. When this is showing, you can press + or - to increase or decrease power or voltage levels.

When charging if you havent already noticed, when the green light is on , its not fully charged, you leave it till the light goes off completely, Or if you want to check, hold + and - down and see what the volts read. 4.1 is usually ok.


The iclear16 are really good atty`s, i used to run mine bout 7 or 8 watts, but was a warm vape.

Hope this helps...... Ian

[marlbororman]

oh if you want to vape while charging, plug the lead in while switched on.