Help with itaste VV V3.0

[kiwi68]

Hi,
Got my new stuff last week, ordered a Evod starter kit, which is a much better than my old Ego, much better quality.

Also got a itaste VV which I have only been brave enough to try today (just looked at it all weekend!!) like it but has given me a head rush and feel a bit sick, do you think I have the voltage and wattage too high? Have it on V4 and W8, not sure whether to use it again on lower settings or just leave it till tomorrow and try again?
Thanks

[Greg]

kiwi68 you can't have it on 4 volts and 8 watts at the same time, it's one or the other so which are you on. If you press the + button what do you see after the puff counts. What resistance is your atty reading ?

[Greg]

To check atty resistance press the + & - button together for two seconds.

[kiwi68]

Apr 14, 2014 21:22:10 GMT Greg said:

kiwi68 you can't have it on 4 volts and 8 watts at the same time, it's one or the other so which are you on. If you press the + button what do you see after the puff counts. What resistance is your atty reading ?

ummmm....I am not sure, says U 4.0 or is it a V? how do I find what resistance its on? 
Thanks

[kiwi68]

Apr 14, 2014 21:25:41 GMT Greg said:

To check atty resistance press the + & - button together for two seconds.

says A2.1 then goes to U 3.7

[Greg]

The u is a v

Think you get a p when in wattage mode.

If you press the + button and hold then the fire button you will go to wattage mode, once you see ie p8 you can then just use the - or + buttons to change wattage.

If you want to change to voltage then press - and hold then press the fire button and hold until you see ie u4 then use plus or minus button to change voltage.

Suggest you put it in wattage mode and turn down to 6 watts then tweak up as you like.

[Greg]

Apr 14, 2014 21:29:27 GMT kiwi68 said:

Apr 14, 2014 21:25:41 GMT Greg said:

To check atty resistance press the + & - button together for two seconds.

says A2.1 then goes to U 3.7

Ok so you are in voltage mode at 3.7 volts and your aty resistance is 2.1 ohms.

this is means your at 6.5 watts so that's quite low.

try turning it right down to 3.3 volts and send how that goes 

[Greg]

Apr 14, 2014 21:29:27 GMT kiwi68 said:

Apr 14, 2014 21:25:41 GMT Greg said:

To check atty resistance press the + & - button together for two seconds.

says A2.1 then goes to U 3.7

The a is an r for resistance and the u is a v for voltage, just hard for the basic display to show curves 

[kiwi68]

Apr 14, 2014 21:34:14 GMT Greg said:

The u is a v

Think you get a p when in wattage mode.

If you press the + button and hold then the fire button you will go to wattage mode, once you see ie p8 you can then just use the - or + buttons to change wattage.

If you want to change to voltage then press - and hold then press the fire button and hold until you see ie u4 then use plus or minus button to change voltage.

Suggest you put it in wattage mode and turn down to 6 watts then tweak up as you like.

Cant find my glasses so is all a bit of a blur, was a guess at u 
Thanks so much for your help, have put it down to p6 and will give it another go 

[Perpetua]

Do any of these links/video's help kiwi68?

www.wikihow.com/Use-Innokin-Itaste-VV-V3.0

[kiwi68]

Apr 14, 2014 21:38:36 GMT Greg said:

Apr 14, 2014 21:29:27 GMT kiwi68 said:

says A2.1 then goes to U 3.7

The a is an r for resistance and the u is a v for voltage, just hard for the basic display to show curves 

hahahha oops need to find my specs 

[DiscoDes]

What strength liquid are you using?

[Greg]

At 3.3 volts you will be at 5.2 watts, you can't get any lower than that with your atty.

Having said all that your Evod battery when fully charged would be 4.2 volts and assuming you're using a similar atty at 2.1 ohms then yourevod is vaping at around 8.4 watts.

[kiwi68]

Apr 14, 2014 21:39:17 GMT Perpetua said:

Do any of these links/video's help kiwi68?

www.wikihow.com/Use-Innokin-Itaste-VV-V3.0

Fantastic, ty Perpetua will watch them now, much easier than trying to work out the instruction booklet 

[Greg]

Are you using different attys on the Evod and itaste ?
If so take the atty your happy with off the Evod battery and put it on the itaste and see how that is.