Evod 2

[Super-Shiny]

Apr 18, 2014 8:03:00 GMT Greigster said:

They look better Jase, where do you get them from?

Comes from a old evod head, bit that hold the wire.

[Greigster]

Apr 18, 2014 8:03:41 GMT iLardyboy said:

Apr 18, 2014 7:50:03 GMT Greigster said:

I am sure there is a valid reason for iLardyboy doing this.........but I cannot think of any benefits ??? It sort of looks like solving a problem that is not there.
Perhaps iLardyboy could clarify the problem he had, that made him try the upside down silicon cup.

Just to clarify, I'm using a single coil head from Protanks.

I first tried it with the grommet from the single coil as normal = flooded

I then tried it with the dual coil grommet turned upside down on top of the single coil grommet = dry hits galore

I then did what I've been talking about = great wicking, no leaking, gurgling or dry hits

I used a single coil head as the dual coil head always ended up flooding after a period of time with a single coil in it.

Hope this helps.

Cheers iLardyboy, I am only just coming back to using clearos so I am quite new to this format.
Is the protank head that you are using different from the Kanger heads that come with the Aerotank?

[iLardyboy]

Apr 18, 2014 8:19:25 GMT Greigster said:

Apr 18, 2014 8:03:41 GMT iLardyboy said:

Just to clarify, I'm using a single coil head from Protanks.

I first tried it with the grommet from the single coil as normal = flooded

I then tried it with the dual coil grommet turned upside down on top of the single coil grommet = dry hits galore

I then did what I've been talking about = great wicking, no leaking, gurgling or dry hits

I used a single coil head as the dual coil head always ended up flooding after a period of time with a single coil in it.

Hope this helps.

Cheers iLardyboy, I am only just coming back to using clearos so I am quite new to this format.
Is the protank head that you are using different from the Kanger heads that come with the Aerotank?

Yes mate, the Aertank heads are dual coil and therefore loads more room inside the cup. I've found it better to use the single coil Kanger heads.

[Greigster]

Apr 18, 2014 8:06:20 GMT Super-Shiny said:

Apr 18, 2014 8:03:00 GMT Greigster said:

They look better Jase, where do you get them from?

Comes from a old evod head, bit that hold the wire.

Ahh, I was hoping that you were going to say these are available for purchase.

[Super-Shiny]

Apr 18, 2014 8:23:02 GMT Greigster said:

Apr 18, 2014 8:06:20 GMT Super-Shiny said:

Comes from a old evod head, bit that hold the wire.

Ahh, I was hoping that you were going to say these are available for purchase.

Got some here: www.ebay.co.uk/itm/261408834269?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

Same design but think they are different material.

Or PM me your addy as i think i have a couple spare.

Just make sure you lubricate them well before pushing the pin in as it's quite tough to get the pin in without splitting it, 1st one on me split, 2nd when was fine.

EDIT: The ones from ebay are silicone and the one i used is rubber, kanger changed to silicone to stop the burnt rubber taste.....at the same time they are weaker then the rubber ones.

[Greigster]

Cheers Jase for the offer but I may have a couple in my odds and sods bag

[Greigster]

Apr 18, 2014 8:22:12 GMT iLardyboy said:

Apr 18, 2014 8:19:25 GMT Greigster said:

Cheers iLardyboy, I am only just coming back to using clearos so I am quite new to this format.
Is the protank head that you are using different from the Kanger heads that come with the Aerotank?

Yes mate, the Aertank heads are dual coil and therefore loads more room inside the cup. I've found it better to use the single coil Kanger heads.

Ah, I see. That may have given me an idea regarding a Davide.....It came with a duel coil head, which is totally different to the Kanger heads, (flat top/no air tube) but it did not recoil very well. So I have been thinking about your idea for using Kanger heads in the Davide.

[iLardyboy]

Apr 18, 2014 10:35:34 GMT Greigster said:

Apr 18, 2014 8:22:12 GMT iLardyboy said:

Yes mate, the Aertank heads are dual coil and therefore loads more room inside the cup. I've found it better to use the single coil Kanger heads.

Ah, I see. That may have given me an idea regarding a Davide.....It came with a duel coil head, which is totally different to the Kanger heads, (flat top/no air tube) but it did not recoil very well. So I have been thinking about your idea for using Kanger heads in the Davide.

Is that the Davide with the extension ring for the bdc coils? You can take the ring off and use normal Protank heads, in fact I have one and I do this. You can also use the aspire heads in a protank 2 if you use the extension ring, and you use the airflow control valve from the Aerotank with them too.

[Greigster]

Are the Aerotank heads different to the Protank2? I cant seem to make the Aerotank heads fit the Davide with or without the bdc extension.

[iLardyboy]

Apr 18, 2014 14:18:51 GMT Greigster said:

Are the Aerotank heads different to the Protank2? I cant seem to make the Aerotank heads fit the Davide with or without the bdc extension.

Yes mate, they are two different heads. The Aerotank ones are larger because are made to hold dual coils.

[Super-Shiny]

Greigster the aerotank heads are pretty much identical to the evod/protank two heads apart from the extra length part where the wick sticks out from which makes the length longer but that should not be a problem as the centre tube just goes up the centre anyway.

Don't know what Davide you have so cannot comment as to whether it will fit.....i do know it fits the old Davides

Ooops crossed posts with iLardyboy

[Greigster]

The Davide I have takes a coil head that does not have a centre tube, so if I try the Aerotank duel coil head without the tube, the silicon cup does not reach the seal on the tank.
The tank has a plastic removable centre piece, which when removed, allows the Aerotank coil tube up through the tank tube but the silicon part is about 4mm from making a seal.

[Super-Shiny]

If it is this one than sorry i ain't got a clue as i have never owned one:

[collie2011]

Right, i just pulled this thing apart and it looks really confusing with 2 coils in it so I quickly put it back together and threw juice in it. Off to look at Super-Shiny's guides to figure out what to do with this, I want cotton wool, flavour is lacking with the stock head on it.

Sent from my Nexus 7 using proboards

[Super-Shiny]

Apr 18, 2014 18:01:37 GMT collie2011 said:

Right, i just pulled this thing apart and it looks really confusing with 2 coils in it so I quickly put it back together and threw juice in it.

Well if you took it apart with two coils and put it back together than you are born to re-build as putting back the two coils ain't the easiest of jobs