russion 91% help come on super shiny and piper

[teethcv]

hello everyone 


so after thinking some time on it brought a russsion 91 clone and i lubed the wic up and left to sit for an hour but all im getting is a taste like plastic do you think the wic is dodgy as its the one it come with should make my own and try it or am i doing something wrong it taste really bad help me out people 


thanks
lee

[ronaldo]

did you wash it out first I made that mistake once tasted like WD40

[teethcv]

Apr 25, 2014 15:14:25 GMT ronaldo said:

did you wash it out first I made that mistake once tasted like WD40

nope i didnt what a tit lol just put some juice in it im thinking its the wic mate gonna have a go at makeing one again no sleep for me tonight lol

[ronaldo]

I did it once they leave a bit of machine oil in the wick will never taste right lob it wash it out and put a new wick in

[teethcv]

Apr 25, 2014 15:18:01 GMT ronaldo said:

I did it once they leave a bit of machine oil in the wick will never taste right lob it wash it out and put a new wick in

wish me look bro lol

[ronaldo]

you can do it
you can do it
you can do it
you can do it
you can do it
it only takes a little bit or practice

[enjay]

Apr 25, 2014 15:32:50 GMT ronaldo said:

you can do it
you can do it
you can do it
you can do it
you can do it
it only takes a little bit or practice

It's really hard to go wrong with them, just give it a dam good wash and get building. Loads of yt vids as well as info on here.

[erik514]

I did a picture tutorial for kayfuns here
It gets easier after the first time

[VapingBad]

Some of the ones from FT need a full strip-down and scrub with tooth paste, the last one I had from them seemed to have a rust spot that even tooth paste wouldn't shift and had to use metal polish. I have had lumps of geese in the drip tip as well. Also non stainless terminal screws can give a nasty flavour.

[teethcv]

what kanthal do you lot use? and my first one didnt turn out good lol

[chykensa]

I gave my Russian clone from FT a good soak in warm/hot water with a few drops of washing up liquid, and left it soaking for an hour. Then rinsed it out thoroughly with loads of very warm water, and a good dry with kitchen towel.
My advice is bin the coil it came with, and have a go building your own, the Kayfun/Rusian is so forgiving, and easy to work on as the deck is uncluttered and high up.
I won't go into detail but have a look at Super-Shiny's excellent guide on how to set up a Kayfun. You can find a link to it underneath his forum signature.
Let us know how you get on

[erik514]

Apr 25, 2014 17:17:52 GMT teethcv said:

what kanthal do you lot use? and my first one didnt turn out good lol

I use .25 for my kayfun.  5 turns around 0.2 ekowool for 1.2 ohm.  My first one was a disaster.  Keep at it though as it's an awesome vape when you get it right 

[teethcv]

Apr 25, 2014 15:56:37 GMT erik514 said:

I did a picture tutorial for kayfuns here
It gets easier after the first time

followed your guide and got 1.4 omhs lets see how it vapes when i leave it to soak up abit

[teethcv]

Apr 25, 2014 17:18:15 GMT chykensa said:

I gave my Russian clone from FT a good soak in warm/hot water with a few drops of washing up liquid, and left it soaking for an hour. Then rinsed it out thoroughly with loads of very warm water, and a good dry with kitchen towel.
My advice is bin the coil it came with, and have a go building your own, the Kayfun/Rusian is so forgiving, and easy to work on as the deck is uncluttered and high up.
I won't go into detail but have a look at Super-Shiny's excellent guide on how to set up a Kayfun. You can find a link to it underneath his forum signature.
Let us know how you get on

i have had a go at it befor a while ago and failed big time so i gave up but then i went for a russian 91 so im going to have to give it ago i just did one and got 1.4 omhs just need to let it sit for a while so the flavor soaks into the wic

[erik514]

If you put some juice on the wick when you build it it's more or less ready to vape. Cover the air hole with your finger and dry pull a couple of times and that helps soak them. No waiting needed