Wizards apprentice

[csmith10]

May 26, 2014 10:32:42 GMT jackcustard said:

May 26, 2014 10:08:22 GMT csmith10 said:

What's the retail on a provari?

About 170-200 i think...

Provari's technology is very outdated from what i have been told...

~And the wizards apprentice is £202 for something cutting edge and well engineered! Doesn't sound too bad when compared to the provari! Saying that, I'll probably wait for the new vamo!

[Super-Shiny]

csmith10 these are meant to be pretty good: www.shop.greek-mods.com/index.php?cat=c52_Dicodes-Dani-Dicodes.html

Shame about the gap though when certain attys are fitted.

[jackcustard]

Looking at how much people are saying the technology has changed in the last year or two.

I wiuod be willing to say that something groundbreaking is due in the next 6 months!

[Super-Shiny]

May 26, 2014 10:41:55 GMT jackcustard said:

Looking at how much people are saying the technology has changed in the last year or two.

I wiuod be willing to say that something groundbreaking is due in the next 6 months!

I will stick with my Spinner and VTR....they have all the technology i need, push a button and vape

[jackcustard]

I agree

[geordie_vaper]

May 26, 2014 10:37:42 GMT csmith10 said:

May 26, 2014 10:32:42 GMT jackcustard said:

About 170-200 i think...

Provari's technology is very outdated from what i have been told...

~And the wizards apprentice is £202 for something cutting edge and well engineered! Doesn't sound too bad when compared to the provari! Saying that, I'll probably wait for the new vamo!

its not that cutting edge just a dna tube mod

[Perpetua]

May 26, 2014 10:01:32 GMT robby said:

www.esmoke-ksd.com/cp_view.asp?id=178

That one should be available pretty soon, it should be over 50% less than that one when it hits the venders

I'm relying on you robby to give us a heads up when it does.

You've saved me a fortune with your spotting skills . . .  I think.

[robby]

You haven`t spent less Perpetua, you just have a lot more crap ................ paraphanalia

[Perpetua]

How true robby.


But I've loved buying and hoarding it all.

[sammy13]

May 26, 2014 9:51:22 GMT csmith10 said:

I've not seen this mentioned on the boards but I really really want this
markbugs.com/index.php?route=product/product&product_id=60

I'm not sure mrs smith will allow it though!

This is 30 watts and you could even put a photo of the wife on it

www.joyetech.co.uk/electronic-cigarettes/evic-supreme/evic-supreme-kit-and-e-liquid#.U4Mst4ZwaP8

[robby]

I`m a bit dubious about the Evic Supreme, if you use coils of over 1.2 ohms, with a max of 6V you wont get 30watts. For example if you use 2.4 ohm coils/heads, it can only give you 15 watts from a max of 6V, but see disclaimer below

Ohm`s Law is the BOSS

[sammy13]

I don't understand watts full stop

What I don't understand mainly is how people are using anything at 15/20/30 watts.
The reason I say this is - I use coils between 1.5 and 2.5 ohm.
I pop it on 4 volts, I then adjust very slightly up or down, so between 3.8 and 4.2.
That is nowhere near 30 watts and yet I may start getting a burnt taste if it is a lower head higher setting, so how does anyone get upto 20/30 watts?

[csmith10]

May 26, 2014 14:09:15 GMT sammy13 said:

I don't understand watts full stop

What I don't understand mainly is how people are using anything at 15/20/30 watts.
The reason I say this is - I use coils between 1.5 and 2.5 ohm.
I pop it on 4 volts, I then adjust very slightly up or down, so between 3.8 and 4.2.
That is nowhere near 30 watts and yet I may start getting a burnt taste if it is a lower head higher setting, so how does anyone get upto 20/30 watts?

^This^. My current set up is an aspire ET-S and spinner 2. Using the 1.8 ohm heads I can't vape above the 3.3v setting and the 2.1ohm heads I max out at 3.8v. It doesn't help that the spinner 2 jumps from 3.3v to 3.8v with nothing in between!

I do like the look of the dicodes telegonos!

[Jerri]

May 26, 2014 10:13:57 GMT Mrsmac said:

Dicodes, or something like that!

The diacodes dani is a gorgeous looking mod. Just looks elegant and simple. I'd have one if cash allowed. But then I'd probably have every mod available that was shiny if cash allowed haha.

[sammy13]

I love the nemesis look, especially in burgundy, I don't know why I just do, my fastech nemesis has now been cancelled though as it was in stock out of stock etc so I gave up.