Non mesh RBAs

[dannyw14]

I'm thinking about having another go with RBAs. When i tried the RSST and Aga T2 I really didn't like the taste of mesh, so I really want to try something that I can use silica or cotton in. Has to be less than say £30. I know it's going to be limited, are we talking some sort of clone?

[geordie_vaper]

kayfun clone is the way to go

[dannyw14]

Are there good and bad ones?

[enjay]

With the genesis just wrap a fine piece of cotton around the end of the mesh where the coil sits, makes it taste different and you don'y get the hot spots to deal with.

[decoy]

try following those 2 vids works rather well in a genni style attie

[dannyw14]

What genni would you recommend?

With a Kayfun clone, what's the difference between lite and 3.1?

[enjay]

Have you not got the rsst? Something like that would be a good place to start seeing as they're nice and cheap.

[dannyw14]

No i sold it. Found a Kayfun 3.1 clone on FT, £14 with spare parts

[decoy]

im trying out the ud ati on a slightly strange wicking setup
did the 2 vids above but just did one coil horizontal and wicked it as a dripper wrapping the 2 mesh posts as well so it will hopefully work as a auto dripper with no mesh coming near the coil

will have to wait n see if it works

[enjay]

Jun 3, 2014 1:06:11 GMT decoy said:

im trying out the ud ati on a slightly strange wicking setup
did the 2 vids above but just did one coil horizontal and wicked it as a dripper wrapping the 2 mesh posts as well so it will hopefully work as a auto dripper with no mesh coming near the coil

will have to wait n see if it works

AGI bud, come on now, it's not a graphics card

[decoy]

opps

[hijack]

Jun 3, 2014 0:24:20 GMT dannyw14 said:

With a Kayfun clone, what's the difference between lite and 3.1?

Think the only difference between the light and 3.1 is the size.

[chykensa]

The Kayfun 3.1 is the full sized beast, whereas the Lite has a smaller base and no airflow control. A Russian would be better as it does have air control, and in other respects is near enough identical to a Kayfun. I have this one from FT and have had no problems with it whatsoever, and in fact am ordering another 2 for myself today.

[dannyw14]

With the russians they have on FT am i right in saying the only difference between them is the finish?

[Dan]

One thing to be wary of the russian on fasttech is the juice channels. Heard of a few people who've had wicking issues because the channels are too small..

personally I'd go for the hcigar kayfun clone, the fogger, or the dream bt804