Whats the shortest 22mm rba?

[boyofford]

Just wondering what the shortest 22mm rba?

Bored at work, quiet day and after couple of accidents involving having mvp in back pocket and breaking thread on thread on protank thought I need to have a small mod/attie combo for out and about.

I already have some nemesis doing nothing, so can use one in 18350 mode.

But what would be the smallest rba I could combine with this..... one other criteria ... Cheap.... been looking through fasttech pages.

Anyone tried to find smallest already and able to point me in right direction?

[jed2705]

You can get this, link, down to 40 mm plus a drip tip but it restricts the volume severely. Not the cheapest option but there are a few nano kits about if you already have a kayfun.

[boyofford]

Was thinking about kayfun + nano kit + hybrid adaptor maybe.

Juice capacity not to much of a problem, not after something for all day.

[ionian]

Jul 14, 2014 20:21:59 GMT boyofford said:

Was thinking about kayfun + nano kit + hybrid adaptor maybe.

Juice capacity not to much of a problem, not after something for all day.

Probably this. I have a heron with a tree of life in 18350 which is pretty diddy as long as you have a mod with 20x1 threading (GP, Gus or similar) so you can use it as a hybrid, otherwise it starts getting mahusive.

Ive just bought the v2 kayfun clone that jed2705 linked to as an out and about atty, thinking along similar lines to you. 

Something like a terminator / oddy is pretty small if you can be bothered faffing with res/no res. not sure if these are 22 or 23mm. 

alternatively get a 14500 set up - it's still long-ish but is pretty discreet. 

[boyofford]

Jul 14, 2014 21:33:28 GMT ionian said:

Jul 14, 2014 20:21:59 GMT boyofford said:

Was thinking about kayfun + nano kit + hybrid adaptor maybe.

Juice capacity not to much of a problem, not after something for all day.

Probably this. I have a heron with a tree of life in 18350 which is pretty diddy as long as you have a mod with 20x1 threading (GP, Gus or similar) so you can use it as a hybrid, otherwise it starts getting mahusive.

Ive just bought the v2 kayfun clone that jed2705 linked to as an out and about atty, thinking along similar lines to you. 

Something like a terminator / oddy is pretty small if you can be bothered faffing with res/no res. not sure if these are 22 or 23mm. 

alternatively get a 14500 set up - it's still long-ish but is pretty discreet. 

Passed on a trade for a gus recently, might regret that as did look sweet, but figured at the time I've got 4 nemesis and don't need any more tube mods to knock over!

Off to google the terminator / oddy, I've been vaping since november but my knowledge of rbas limited to what i've searched/bumped into on the threads.... been more into rdas, using protanks for tanks............ I coil both but not tried NR-R-NR I'd probably buy pre made wire to coil I guess if I went this way.

Hadn't thought about 14500, but after something cheap to go with nemesis really.... still off to look into it, don't know much about 14500 mods.

I've already got a 20x0.5 adapter in one of my nemesis (or should that be nemesi?) does shorten stuff a touch, but gain some throw with the particular adapter I've got.... I'd probably buy a fasttech on just for kayfun if went that way I think.

Off to do more reading, cheers!

[boyofford]

Just looked up the oddy..... 22.6mm diameter why
but 60.8 mm height (kinda posting that to remind myself for reference)

[boyofford]

Jul 14, 2014 18:56:30 GMT jed2705 said:

You can get this, link, down to 40 mm plus a drip tip but it restricts the volume severely. Not the cheapest option but there are a few nano kits about if you already have a kayfun.

think I've found a link to it setup on a nemesis, looks pretty good.... not keen on the drip tip though I'm just being picky now! ....www.fasttech.com/forums/1700500/t/1299919/kayfun-lite-plus-v2-vs-kayfun-lite-pmma-pics?1300213

[ionian]

That looks great - get a shorty drip tip like these:
www.fasttech.com/products/1777300

Or these:
www.fasttech.com/products/1662202

Or even this:
www.fasttech.com/products/1535503

...and it will be a great stealth set-up!

[boyofford]

Jul 14, 2014 22:56:54 GMT ionian said:

That looks great - get a shorty drip tip like these:
www.fasttech.com/products/1777300

Or these:
www.fasttech.com/products/1662202

Or even this:
www.fasttech.com/products/1535503

...and it will be a great stealth set-up!

The last one would look good on my incoming aerotank mega actually!

[ionian]

I have all of those drip tops on the way, so I'll post a pic when they arrive.

I had a bit of a mad FT moment - you know you have chinaitis bad when your last FT order is nothing but drip tips, 20 in total...

[boyofford]

Jul 14, 2014 23:20:25 GMT ionian said:

I have all of those drip tops on the way, so I'll post a pic when they arrive.

I had a bit of a mad FT moment - you know you have chinaitis bad when your last FT order is nothing but drip tips, 20 in total...

20!?
I always mean to buy drip tips.... but then forget when do an order

just been looking at the heron + GP Paps
Think they fit together? combined cost same as kayfun and no need for hybrid adapter.
Looks good too..... but do I need another mod?

[ionian]

Jul 14, 2014 23:51:05 GMT boyofford said:

Jul 14, 2014 23:20:25 GMT ionian said:

I have all of those drip tops on the way, so I'll post a pic when they arrive.

I had a bit of a mad FT moment - you know you have chinaitis bad when your last FT order is nothing but drip tips, 20 in total...

20!?
I always mean to buy drip tips.... but then forget when do an order

just been looking at the heron + GP Paps
Think they fit together? combined cost same as kayfun and no need for hybrid adapter.
Looks good too..... but do I need another mod?

the GP Paps on FT doesn't get good comments - get the brass one seems to be the best advice. I'm not sure that it has 20x1 threading though. The heron is great, I love filler atties. The tree of life clone is 20x1 and available on fasttech - I'm thinking of selling mine (getting a gus mod) so pm me if you like the look of it.

However, your nemmy was the plan - so I don't think you can go far wrong with that kayfun v2 nano...

[boyofford]

Jul 15, 2014 1:35:41 GMT ionian said:

Jul 14, 2014 23:51:05 GMT boyofford said:

20!?
I always mean to buy drip tips.... but then forget when do an order

just been looking at the heron + GP Paps
Think they fit together? combined cost same as kayfun and no need for hybrid adapter.
Looks good too..... but do I need another mod?

the GP Paps on FT doesn't get good comments - get the brass one seems to be the best advice. I'm not sure that it has 20x1 threading though. The heron is great, I love filler atties. The tree of life clone is 20x1 and available on fasttech - I'm thinking of selling mine (getting a gus mod) so pm me if you like the look of it.

However, your nemmy was the plan - so I don't think you can go far wrong with that kayfun v2 nano...

Don't like the look of the switch on tree of life, read ss GP Paps ain't as well made too in discussions.

Your right, the kayfun v2 nano looks the way to go, the bottom screw fill malarkey has always put me off a bit as I'm a clumsy sod and liable to drop the dam thing though!

Cheers for help bud, off to buy today, should get sometime next month fingers crossed!

[jed2705]

If you don't mind brass drip tips try this it splits into two tiny. Just bought a Fortune Mods OB 18350 which is tiny and have been trying to get the smallest set up I can to go with it.

[boyofford]

Jul 15, 2014 20:12:17 GMT jed2705 said:

If you don't mind brass drip tips try this it splits into two tiny. Just bought a Fortune Mods OB 18350 which is tiny and have been trying to get the smallest set up I can to go with it.

Might have to get that, it is tiny!