Rose v2 clone

[Dan]

Update - Got fed up of trawling the internet so tried a simple fix. Wrapped a bit of PTFE tape around the 510 screw (making sure it doesn't interfere with the connection).

Problem solved. It's now reading true on everything

[arron]

Oct 6, 2014 13:01:55 GMT Dan said:

Update - Got fed up of trawling the internet so tried a simple fix. Wrapped a bit of PTFE tape around the 510 screw (making sure it doesn't interfere with the connection).

Problem solved. It's now reading true on everything

We all know you just tightened up that grub screw but don't wanna admit your noob error 

[Dan]

Oct 6, 2014 13:13:30 GMT arron said:

Oct 6, 2014 13:01:55 GMT Dan said:

Update - Got fed up of trawling the internet so tried a simple fix. Wrapped a bit of PTFE tape around the 510 screw (making sure it doesn't interfere with the connection).

Problem solved. It's now reading true on everything

We all know you just tightened up that grub screw but don't wanna admit your noob error 

nope, I even have proof Tease-smiley




Interestingly enough, I received two more on Saturday from a vendor, both have exactly the same issue! Will be tending to them this evening

That'll a make a family of five when your shipment lands

[robdelmar]

Had a problem with my 510 pin, threads where stripped, replaced with brass m2 cheese head bolt and 2mm id x 1.5 cs o ring

[macmagoo]

You would be better getting the O'rings that Andy Hobbs suggested on Facebook.

[Dan]

Oct 6, 2014 19:02:40 GMT macmagoo said:

You would be better getting the O'rings that Andy Hobbs suggested on Facebook.

They're already ordered lol

25 of each except 15mm. Ordered 50 of those

[macmagoo]

Oct 6, 2014 19:07:00 GMT Dan said:

Oct 6, 2014 19:02:40 GMT macmagoo said:

You would be better getting the O'rings that Andy Hobbs suggested on Facebook.

They're already ordered lol

25 of each except 15mm. Ordered 50 of those

You will not be running out of them any time soon then. 

[xs2man]

My Rose is leaking like a pig out the airflow hole. Any ideas?

[ciderhead]

Juice control open to much,not enough wick?

[macmagoo]

Close the juice control a bit and check the drip well on the bottom because if it has a lot of juice in it it will leak from the air hole.

[Dan]

Oct 6, 2014 22:17:55 GMT xs2man said:

My Rose is leaking like a pig out the airflow hole. Any ideas?

Either add more wick or close the juice control down.

You don't want to stuff the channels, but they do need to be full..

[Ripshod]

Wicks should be dry too. Leave the wicks dry til you're just about to put the juice control on. I've found that messing with the wicks when wet seems to compact them, making the wick dry out.

Hope this helps.

[flavourtank]

hey

just coiled my 2nd rose

the coil is 1.1ohm when fire it up the drip tip gets really hot

it doesnt matter what wattage i use its still hot and i keep coughing my lungs up

any ideas??

[Deleted]

Oct 7, 2014 21:48:43 GMT flavourtank said:

hey

just coiled my 2nd rose

the coil is 1.1ohm when fire it up the drip tip gets really hot

it doesnt matter what wattage i use its still hot and i keep coughing my lungs up

any ideas??

try lift the coil a little.....away from the air hole could be too low so it's not got room to breathe

[flavourtank]

Oct 7, 2014 21:52:20 GMT @tazmania441 said:

Oct 7, 2014 21:48:43 GMT flavourtank said:

hey

just coiled my 2nd rose

the coil is 1.1ohm when fire it up the drip tip gets really hot

it doesnt matter what wattage i use its still hot and i keep coughing my lungs up

any ideas??

try lift the coil a little.....away from the air hole could be too low so it's not got room to breathe

thats the shiz, cheers buddy doesn't feel like ive been drinking wasabi sauce lol