Rose v2 clone

[robby]

Dont understand it decoy, mine crackles away on basic twin coiled at 16 watts ???

[decoy]

Sept 11, 2014 8:41:00 GMT geordie_vaper said:

least you can get a coil in one in uder a hour haha!!!

can coil one in about 15 mins its quite easy once you learn how long to cut the legs

robby it the silence thats doing my nut in more than anything have fully stripped it down, checked it and found nothing amiss im confuddeld

[robby]

That`s weird decoy , even at 15 or 16 on the DNA mine is sizzling away like a frying pan with streaky bacon in it mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm

[robby]

new batteries for the hearing aid?

[decoy]

Sept 11, 2014 9:16:57 GMT robby said:

new batteries for the hearing aid?

lol i wish it was that simple 

ok had a vodca n coke(i works nights lol)
triple twisted .2 wire at 1.4 ohms and i can hear it and got a half decent amount of vapor(back on cotton)

sorry about the stress but gerrrrrrrrrrrrrrrr

[geordie_vaper]

alcohol always helps

[robby]

Sept 11, 2014 9:48:04 GMT decoy said:

Sept 11, 2014 9:16:57 GMT robby said:

new batteries for the hearing aid?

lol i wish it was that simple 

ok had a vodca n coke(i works nights lol)
triple twisted .2 wire at 1.4 ohms and i can hear it and got a half decent amount of vapor(back on cotton)

sorry about the stress but gerrrrrrrrrrrrrrrr

Just wondering, how much do you unscrew the chimney decoy, mine ends up between a half and threequarters turn

[Deleted]

Sept 11, 2014 7:26:59 GMT decoy said:

ok little update just chucked the rose across the room had nuff of it
no matter how i coil it or how low an ohmage i use i get hardly any vaper outa the sodding thing,even tried a simple .5 micro coil using .3 wire on my nemi and hardly any coil crackel or vaper yea loads of flavor but after using all coils known to man this thing has finally peed me off to the point of lobbing it.Have never done that with any vape gear before

its time to put it back in the box and leave it in the draw sorry guys but ive just about give up on this thing

Very odd decoy. I get plenty of vapour out of mine and im only using 12 wraps of .27 on a 1.6mm bit at 2ohms. Mind you I do use it at 14w on my shark plus I only ever vape 100% vg so perhaps that helps. The other half always moans about the clouds im making.

[decoy]

Sept 11, 2014 10:05:25 GMT @windows said:

Sept 11, 2014 7:26:59 GMT decoy said:

ok little update just chucked the rose across the room had nuff of it
no matter how i coil it or how low an ohmage i use i get hardly any vaper outa the sodding thing,even tried a simple .5 micro coil using .3 wire on my nemi and hardly any coil crackel or vaper yea loads of flavor but after using all coils known to man this thing has finally peed me off to the point of lobbing it.Have never done that with any vape gear before

its time to put it back in the box and leave it in the draw sorry guys but ive just about give up on this thing

Very odd decoy. I get plenty of vapour out of mine and im only using 12 wraps of .27 on a 1.6mm bit at 2ohms. Mind you I do use it at 14w on my shark plus I only ever vape 100% vg so perhaps that helps. The other half always moans about the clouds im making.

never had anything like what i get outa my kayfun mini or mini protank (micro coiled) and im on 70/30
robby i tend to turn the atty upside down and unscrew the juice control all the way then half a turn on is that were im going wrong lol

[Deleted]

Sept 11, 2014 10:09:56 GMT decoy said:

Sept 11, 2014 10:05:25 GMT @windows said:

Very odd decoy. I get plenty of vapour out of mine and im only using 12 wraps of .27 on a 1.6mm bit at 2ohms. Mind you I do use it at 14w on my shark plus I only ever vape 100% vg so perhaps that helps. The other half always moans about the clouds im making.

never had anything like what i get outa my kayfun mini or mini protank (micro coiled) and im on 70/30
robby i tend to turn the atty upside down and unscrew the juice control all the way then half a turn on is that were im going wrong lol

Wòooooooow open way too much. Screw it down fully and use it till you start to get a dry hit then open half a turn.

[robby]

Sept 11, 2014 10:09:56 GMT decoy said:

Sept 11, 2014 10:05:25 GMT @windows said:

Very odd decoy. I get plenty of vapour out of mine and im only using 12 wraps of .27 on a 1.6mm bit at 2ohms. Mind you I do use it at 14w on my shark plus I only ever vape 100% vg so perhaps that helps. The other half always moans about the clouds im making.

never had anything like what i get outa my kayfun mini or mini protank (micro coiled) and im on 70/30
robby i tend to turn the atty upside down and unscrew the juice control all the way then half a turn on is that were im going wrong lol

Mine is always fully screwed down when I refill (taking the top cap off) and then half a turn usually does it for me. That is at 15 or 16 watts though, may need a bit more for anything higher, I haven`t really gone any higher myself

I`m surprised yours isn`t flooding decoy

[decoy]

Sept 11, 2014 10:14:16 GMT @windows said:

Sept 11, 2014 10:09:56 GMT decoy said:

never had anything like what i get outa my kayfun mini or mini protank (micro coiled) and im on 70/30
robby i tend to turn the atty upside down and unscrew the juice control all the way then half a turn on is that were im going wrong lol

Wòooooooow open way too much. Screw it down fully and use it till you start to get a dry hit then open half a turn.

on it sod the nic rush im having 

[robby]

I find mine never floods unless I forget to tighten down the chimney before I re fill with the top cap off, if I forget it just pishes out even at half a turn lol

I have changed the o ring on my chimney, it was way too good a grip on the top cap and tended to unscrew the chimney when I took the top off.

[decoy]

Sept 11, 2014 10:23:47 GMT robby said:

I find mine never floods unless I forget to tighten down the chimney before I re fill with the top cap off, if I forget it just pishes out even at half a turn lol

I have changed the o ring on my chimney, it was way too good a grip on the top cap and tended to unscrew the chimney when I took the top off.

its never leaked and to me is eser to work on than a kayfun but ive never had juice control before

[rednutt]

I got mine coiled. Came out at 2.2 but oh well it's up and running. For my third attempt at coiling I'm not going to complain. Got my yorkshire fog in there so let's see how she goes today. I'm not going down the route of twisted just yet. I'll just focus on learning the basic art of coiling first