itaste 134 not working any ideas on how to fix?

[johnxxxl]

Anyone know the correct screwdriver to use to get into it? Heads are screwed down mega tight and i dont want to tear the screw heads .

I have 6 red flashes of the light when trying to fire it up 
used three different makes of 18650 batteries (even went out and bought a new one)
Replaced 2.1 Ohm iclear 30 coil even tried it with the 1.8 Ohm
Rotator Knob not stuck between numbers works fine


   I have contacted Innokin but since it was purchased from e bay (scratch n check serials all ok) have been more or less told to piss off.
  Any help appreciated

  its not a mini 134 

could it be the same problem that iTaste SVD has?   im thinking of giving this a bash

Also i have heard when you get the top ring screws off there is a piece of yellow cellophane that sometimes fallls down. It may have been glued to the button to protect it from moisture originally when this is patch up again all is well.

LOL i am kinda nervous about tackling this Beast !

[ronaldo]

You will struggle im afraid I am a electronics engineer and I had one hell of a job working on them
and to find a replacement head is expensive I was quoted fifty quid trade
is yours the mini or 18650
I may know of one as I know someone that lost his tubes when fishing changing his battery will try and get in touch with him

[Deleted]

Get a vtr.... Tease-smiley and when you do get it fixed don't screw in clearo so tight and possibly get a AFC for the threads

send to ronaldo

[enagee]

Lasted longer than my VTR ..3 months and a few weeks...in arguement now with innokin
Thinking these all singing all dancing mods are not worth buying

[Deleted]

Seriously enagee? How long did your VTR last? Mine has lasted 4 months so far ....make that 4.5

Did you not protect the threads with an AFC?

[blakey]

I've heard many horror stories with innokin mods and I've heard some vendors say that they have a high return rate, personally- I've owned two MVP v1s, two MPV v2s, a 134, a 134 mini, two coolfire 1s, two coolfire 2s, two VTRs and the only problem I encountered was the 510 connector wire broke free on a coolfire 1. All the rest have been issue free and still work fine.

[Greg]

Oct 5, 2014 19:58:50 GMT blakey said:

I've heard many horror stories with innokin mods and I've heard some vendors say that they have a high return rate, personally- I've owned two MVP v1s, two MPV v2s, a 134, a 134 mini, two coolfire 1s, two coolfire 2s, two VTRs and the only problem I encountered was the 510 connector wire broke free on a coolfire 1. All the rest have been issue free and still work fine.

Really 

[Deleted]

Oct 5, 2014 19:58:50 GMT blakey said:

I've heard many horror stories with innokin mods and I've heard some vendors say that they have a high return rate, personally- I've owned two MVP v1s, two MPV v2s, a 134, a 134 mini, two coolfire 1s, two coolfire 2s, two VTRs and the only problem I encountered was the 510 connector wire broke free on a coolfire 1. All the rest have been issue free and still work fine.

Makes you wonder if you should just advise beginners to get a mech mod and start with a simple non rebuildable clearo that just takes heads with a decent resistance like 2ohms? after this they can move on to lower resistance, building their own atomisers etc...

Just a thought

[blakey]

Oct 5, 2014 20:05:20 GMT Greg said:

Oct 5, 2014 19:58:50 GMT blakey said:

I've heard many horror stories with innokin mods and I've heard some vendors say that they have a high return rate, personally- I've owned two MVP v1s, two MPV v2s, a 134, a 134 mini, two coolfire 1s, two coolfire 2s, two VTRs and the only problem I encountered was the 510 connector wire broke free on a coolfire 1. All the rest have been issue free and still work fine.

Really 

I know mate
But they are so comfortable in the hand when you're in front of the tv. They will never leave the house

[enagee]

Used a Kanger aerotank on it all the time